Used Trumpf Trumatic 7000-1300 for sale (413)

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System Kwedpfx Aeyu S D Ajb Tew - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation Kwedeylk Nxspfx Ab Tew - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Year of construction: 2003, condition: ready for operation (used), A hydraulic CNC punching machine Trumpf with rotation is available. Punching force: 220kN, max. sheet thickness: 8mm, travel path X/Y: 2535mm/1280mm, max. workpiece weight: 200kg, feed rate X/Y: 100m/min/60m/min, simultaneous: 116m/min, stroke rate punching/marking: 1200/min/2800/min, C-tool rotation: 330rpm. Machine dimensions X/Y: approx. 6800mm/6100mm, weight: approx. 15000kg, operating hours: approx. 31000h. Documentation available. An on-site inspection is possible. Kwsdpfx Aoyn Nz Seb Tsw

Year of construction: 2004, condition: ready for operation (used), A CNC punching machine Trumpf in medium format including SheetMaster, ToolMaster and GripMaster is available. Punching force: 220kN, max. sheet thickness: 8mm, travel X/Y: 2535mm/1280mm, max. workpiece weight: 200kg, feed rate X/Y: 100m/min/60m/min, simultaneous: 116m/min, stroke rate punching/marking: 1200/min/2800/min, C-tool rotation: 330rpm. Machine dimensions X/Y: approx. 6800mm/6100mm, weight: approx. 15000kg, operating hours: approx. 68000h. Documentation available. An on-site inspection is possible. Kwsdsyn N Acspfx Ab Tow

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Kwedpfx Asm Ak Hueb Tow Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,900 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 7,850 h, laser power: 3,200 W, punching diameter: 76 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, foot remote control, fume extraction, nozzle changer, quick-change device, safety light barrier, Laser TruFlow 3200, including LensLine with optimized standby Nozzle changing device Multitool drive system "Multishear" function "Multibend" function Tapping function High-speed "Marking" / "Ribbing" function Engraving function Rolling and deburring function Softpunch function Active Die Stripline Repositioning with pneumatic cylinders Vibration-dampened installation Chip conveyor with container Ball table work surface with brush inserts Blowing device Kwjdjx N Hyvepfx Ab Tew SheetMaster (3000 x 1500) Automatic sheet separation system with lateral air blast Additional positioning guides for sheet size (2500 x 1250) Additional positioning guides for sheet size (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double trolleys with toothed belt drive (3000 x 1500) Loading and unloading unit Good part conveyor on punching side Good part conveyor on laser side Warehouse interface No. 21 RTC toolboxes incl. die holder plate

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 54,710 h, laser power: 4,000 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS X-axis working range: max. 2,550 mm Y-axis working range: max. 1,250 mm Control: Rexroth IndraMotion MTX Travel speeds X-axis: 100 m/min Y-axis: 60 m/min Simultaneous (X and Y): 116 m/min C-axis and stroke sequences C-axis punching: 330 rpm C-axis tapping: 330 rpm Max. stroke sequence punching (E = 1 mm): 1,200 rpm Max. stroke sequence marking: 2,800 rpm Tool technology Linear magazine: 22 tools with 3 clamps Number of tools when using MultiTool: 22 – 220 Tool change time: 0.3 – 2.8 s Laser Laser power: 4,000 W Laser type: CO₂ laser TruFlow 4000 Lens: 170 mm C-axis rotation: 360° Laser control: TASC Functions: Thread forming, MultiBend, MultiTool, deburring, and rolling technology Punching Punching force: 220 kN Punching head: electro-hydraulic Tool rotation: 360° Pressure clamp: programmable (active / passive / repositioning) MACHINE DETAILS Dimensions (L x W): 8,000 x 6,700 mm Height: 2,500 mm Weight: 24,100 kg Operating times Control operating time: 58,842 h Laser operating time: 54,710 h Beam operating time: 15,518 h EQUIPMENT - 3 Clamping clamps - Slag cone detection - Flap for laser parts 500 x 500 mm with sensor - 2 good part containers for punched and laser parts - Chip container - Ejection cylinder for laser parts - Quick-change device for cutting head - Punch slug extraction - Adaptive stroke calibration - Programmable hold-down device (active/passive/repositioning) - Tool length compensation - Active die - Parts conveyor belt at punching and laser station Kwsdpewhpbtsfx Ab Tjw - Chip conveyor with tilting container - Blow-out device for small parts - SheetMaster with suction frame (36 suction cups, Y-axis 400 mm, V-axis 170 mm) - Skiving suction cup with vacuum sensor - Automatic clamp closing - Sheet thickness gauge for double sheet control - GripMaster with scrap skeleton tilting pallet (2,500 x 1,250 mm) - Double unloading cart - Parts conveyor belt Punching station - Parts conveyor belt, laser station - Storage interface - Table extension - Brush tables - Various safety devices

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale 2.5metre x 1250mm sheet metal before reposition Kedpong Al Aofx Ab Tjww 1300mm throat New / Year 2000 Fully serviced With manuals Good condition and can be seen working in production Complete with:

Condition: excellent (used), Year of construction: 2006, laser power: 6,000 W, Used Low Cutting Hours Trumpf Trumatic L3050 6kw cnc laser cutting machine for sale Technical information: Year 2006 Workpiece dimensions 3000 x 1500 mm / 3metre x 1.5metre Type of Laser TLF 6000 Power 6000 Watt / 6kw Control Siemens Sinumerik 840D Longitudinal travel X-axis 3000 mm Cross travel Y-axis 1500 mm Height travel Z-axis 115 mm Travel speed 200 m/min Max cutting thickness in steel 25 mm Weight 12 ton Kjdpfxervhzmo Ab Teww Delivery and installation complete with tuition can be arranged.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Operating hours: approx. 68,000 hours Including Sheetmaster, Toolmaster, Gripmaster Kodpfeygik Dsx Ab Tjww

Condition: used, Year of construction: 1998, Punching capacity 165 kN working area 2070 x 1280 mm plate thickness 6,4 mm control CC 220 workpiece weight 150 kg Kodpfx Absyv Ng Es Teww punch diameter 76,2 mm 80 m/min 55 m/min weight of the machine ca. 8000 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,904 h, laser power: 4,000,000 W, travel distance X-axis: 4,000 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L 4030 was manufactured in 2006. It features a processing area of 4000 mm x 2000 mm and a powerful 4000 W laser. The machine requires a mains supply of 400 V and has a total connected load of 88 kVA. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 4030 CO2 laser cutting machine we have for sale. Contact us for further details. • Processing area: 4000 x 2000 mm • Mains supply: 400 V / 50 Hz • Total connected load: 88 kVA • Control voltage: 24 V • Required fuse protection: 3 × 160 A • Compressed air connection: 7–10 bar • Nitrogen connection (N₂): 30 bar • Oxygen connection (O₂): 20 bar • Operating Hours (NC): 84196 • Operating Hours (Resonator / HP Pump 1): 72564 • Operating Hours (Beam On / HP Pump 2): 30904 • Included Components: 2 Replacement Control Cabinets Kodsyu Nq Tepfx Ab Tsww • Retrofits: Easy Filter Kit (installed 2023)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 115,000 h, laser power: 5,000,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 5000 W laser source and includes a LoadMaster sheet loading system for enhanced automation. The machine has an operating hour count of approximately 40,000 hours with the beam on and 115,000 hours with the laser on. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO2 laser cutting machine we have for sale. Contact us for further details. Kwodpfjyuw Dbox Ab Tew • Control voltage: 24 V • Power supply: 400 V / 50 Hz • Total connected load: 105 kVA • Required fuse protection: 3 × 160 A • Compressed air connection: 7–10 bar • Nitrogen connection (N₂): 30 bar • Oxygen connection (O₂): 20 bar • Operating hours (beam on): approx. 40,000 h • Operating hours (laser on): approx. 115,000 h Additional equipment • Automation: LoadMaster sheet loading system

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, Used TRUMPF TruMatic 6000 (K01) – Medium format Kedpfowkd Efsx Ab Teww Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Laser TrueFlow 2000 with laser power: 100-2,000 watts NC operating hours: 41,804 Resonator hours: 14,466 Beam-on hours: 2,054 Y-axis: 1,300 mm Additional equipment: various tools Recently installed new parts: Conversion to TASC5 laser control (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Year of construction: 2003, condition: good (used), Used quality Trumpf 5kw cnc laser 4metre x 2metre cutting bed Its just been serviced by Trumpf and outputting the same power as new. Ksdpehcw Nzofx Ab Toww Very low hours for its age, very good condition, used intermittently on one shift and available to see in operation by appointment: Make – Trumpf Model – Trumatic L 4050 Laser type – TLF 5000TM / 5kw / 5000watts Year of manufacture – 2003 – commissioned 2004 Size – 4metre x 2 metre Features – Rotolas tube cutting facility (examples of parts just processed per photographs) Hours – Laser turned on 33861 – Beam on 11480 Fully serviced with Trumpf uk

Condition: ready for operation (used), controller manufacturer: Siemens Sinumerik 840D, laser power: 2,400 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,750 mm, total length: 8,400 mm, total width: 7,800 mm, empty load weight: 22,500 kg, De machine is nog steeds functioneel en in gebruik. Uitgerust met: - 3 plaatklemmen - Sheetmaster-lossysteem - GripMaster Kwedpsygyvqefx Ab Tew Workpiece dimensions: 3085 x 1650 mm Type of Laser: Trumpf TLF Max cuttingthickness in steel: 8 mm Loading System: yes, SheetMaster

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min • Maximum iron thickness: 25 mm • Maximum stainless steel thickness: 25 mm Kwodpfx Aboym A Hro Tjw • Maximum aluminum thickness: 15 mm Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed)

Condition: ready for operation (used), Year of construction: 1998, punching force: 22 t, total height: 2,300 mm, sheet thickness (max.): 6 mm, overall weight: 13,800 kg, table width: 3,000 mm, table length: 1,500 mm, table load: 100 kg, controller manufacturer: TRUMPF, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • X-axis working range: 3000 mm without repositioning • Y-axis working range: 1500 mm • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode Kwjdjx Uqzzspfx Ab Tew • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar The machine is in working condition. It includes a large set of punches, dies, and tool holders. Dimensions Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,364 h, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details. • Laser Power: 6000 W • Laser Type: CO₂ Ksdpjynlhnofx Ab Tsww • Supply Voltage: 400 V / 50 Hz • Connected Load: 109 kVA • Control Voltage: 24 V • Required Fuse Protection: 3 × 160 A • Compressed Air Connection: 7–10 bar • Nitrogen Connection (N₂): 30 bar • Oxygen Connection (O₂): 20 bar • Working Area (Sheet Format): 3000 × 1500 mm

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, product length (max.): 3,800 mm, CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine. • Maximum sheet thickness: 4 mm • Maximum punching diameter: 38 mm • Working area without repositioning: 1000 x 1000 mm • Working area with one repositioning: 1000 x 2000 mm • X/Y axis speed: not specified • Rotation speed: 360 degrees per second (full rotation) Ksdoymz Rcepfx Ab Teww • Maximum stroke rate: 340 strokes per minute • Control system: TRUMAGRAPH CC 200 • Automatic tool change: 9 tool stations • Power requirement: 15 kVA / 50 Hz • Documentation: Complete documentation included, together with machine history Additional equipment • Large set of tools • Two additional tables to extend the working area

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, number of axes: 3, This 3-axis TRUMPF Trumatic 120R was manufactured in 1991. It features a maximum punching force of 150 kN and a machine weight of 4,300 kg. With an estimated operational lifespan of 40,000–60,000 hours, this machine is designed for durability. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 120R CNC punching machine we have for sale. Contact us for further details. • Supply voltage: 380 V • Frequency: 50 Hz • Connected load: 9 kVA • Control voltage: 24 V DC • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Estimated operating hours: 40,000–60,000 (based on condition and guides) Kwsdpfsyn Ddbox Ab Tow

Condition: ready for operation (used), Year of construction: 1999, operating hours: 51,135 h, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, overall weight: 13,800 kg, controller manufacturer: BOSCH, number of axes: 2, CNC punching machine manufactured in 1999. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 3,000 mm by 1,600 mm. It is equipped with a Bosch control system and is multitool capable. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details. Kwedpsyn Dd Ijfx Ab Tjw • Programming system: Trumagraph • Supply voltage: 400 V / 50 Hz • Connected load: 19 kVA • Control voltage: 24 V • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Multitool capable • Partially overhauled • Operating hours (mechanical counter): 51,135 h Additional equipment • 2 tools with cassette (for commissioning) • Documentation available

Condition: ready for operation (used), Year of construction: 1995, operating hours: 40,507 h, punching force: 22 t, travel distance X-axis: 2,500 mm, overall weight: 11,050 kg, controller manufacturer: BOSCH, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 2,500 mm. It is multitool capable and comes with 2 tools in a cassette for commissioning. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details. • Programming system: Trumagraph • Supply voltage: 400 V / 50 Hz • Connected load: 17 kVA • Control voltage: 24 V • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Multitool capable • Documentation available • Condition: Partially overhauled • Operating hours: 40,507 h Kwsdpfx Aeyn Dkzsb Tsw Additional equipment • 2 tools with cassette (for commissioning)

Condition: ready for operation (used), Year of construction: 2014, This TRUMPF TRUBEND CELL 7000 was manufactured in 2014. It's a high-speed automatic bending system, ideal for small to medium-sized sheet metal parts. Features include a press brake, robotic handling, and an integrated feeding system. The machine is in excellent condition, comes with a large set of bending tools, and is ready for loading. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 7000 machine we have for sale. Contact us for more information. • Press Force: 360 kN • Bending Length: 1020 mm Kwsdpfx Abex D Hypj Tjw • Throat Depth: 300 mm • Large set of bending tools • ToolMaster Bend with Tool Identification System (TIS) • Additional loading pallet • Fully enclosed cell roof • LoadMaster gripper with flat suction cups and 4 electromagnets • Combined conveyors (pallet + belt system) • 1 additional clamp-type gripper with 2 pairs of jaws

Condition: ready for operation (used), Year of construction: 1996, overall weight: 18,000 kg, This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details. • Maximum punching force: 220 kN • Laser power: 1500 W • Laser type: TLF 1500 T • Laser nominal power: 54 kVA • Supply voltage: 400 V • Frequency: 50 / 60 Hz • Nominal current: 78 A • Required fuse protection: 3 × 80 A • Control voltage: 24 V DC • Compressed air requirement: 7 – 11 bar Kwodpfx Asynk Exjb Tow • Power supply unit type: IS 11 / 13560 • Power supply output power: 11 kW • Power supply frequency: 13560 kHz • Laser system in operation for approx. 30000–40000 hours