Used Nibbler Trumpf for sale (377)

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Kodpfs Aaxt Rjx Ahajnc Year of manufacture: 2011 Mains voltage: 400 V Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Knjdpfxjz Ii A Ss Ahaoc Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Manufacturer: TRUMPF Kedpfx Aoz R Dz Aehajnc Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Kjdpfx Ahoz Rknpjaonc

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Work area size: 3000x1500 mm Knedpfx Ahjzzyl Hoaoc Further details can be found in the images, and it comes with a commissioning guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: N1063G0209, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, Manufacturer: TRUMPF Model: LiftMaster Compact AL34 Year of manufacture: 2018 This TRUMPF LiftMaster Compact 1530 (AL34) is a robust industrial sheet metal handling machine, designed for efficient loading and unloading of sheets up to 3000 mm in length and 1500 mm in width. It handles material thicknesses up to 25 mm, meeting the requirements for processing heavy sheet metal. The machine is equipped with a conveyor table with multiple metal spikes that securely hold the sheet metal during handling. An integrated overhead mechanical arm with suction cups facilitates precise lifting and placement of the sheets. The suction lifting device is clearly marked with the TRUMPF LiftMaster Compact brand. The machine has a discharge conveyor belt and is currently in working order. Knodpfx Aho Aay Sheasc It is possible to inspect the machine while it is in operation. The frame construction is painted in a combination of blue and white, giving it a professional, industrial appearance. The machine is clean and well-maintained, with no visible damage or wear to critical components such as the suction cups, lifting mechanism, conveyor table, and chain drive system. Additional features include a deburring unit, double-sheet detection, a synchronous feeder with separation for thin sheets (0.8 - 2.0 mm), and extended pallet removal capabilities. The loading station handles a stack height of up to 90 mm, and a soft steel grab with replaceable teeth (67 mm spacing) is included for handling finished parts. The machine has been serviced by Trumpf since its initial installation. Overall, the TRUMPF LiftMaster Compact 1530 (AL34) is a reliable and comprehensive solution for automated sheet metal loading and unloading in industrial environments.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Ksdpeza U Nfsfx Ahaonc Bending Length 4250 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Knsdsz I S Uwopfx Ahajc Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, Submitting a bid obligates the bidder to collect the item by December 1, 2026. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 7040 (L62) Year of Manufacture: 2012 Operating Hours: need to be updated Working Area Working area X/Y/Z: 4,000 × 2,500 × 115 mm Speed: max. 304 m/min Accuracy: ±0.1 mm Laser Laser power: 2 × 4 kW Laser heads: 2 units Condition of laser heads: functional Kjdpe Aayn Nefx Ahaonc Cutting Capacities Sheet metal thickness steel: max. 20 mm Sheet metal thickness stainless steel: max. 15 mm Sheet metal thickness aluminum: max. 10 mm Control System Control system: Siemens Sinumerik 840 D SL Machine Dimensions and Weight Length: 15,800 mm Width: 7,280 mm Height: 3,090 mm Weight: 16,500 kg Environmental Conditions Ambient temperature: max. 43 °C EQUIPMENT Thin sheet metal productivity package for high-speed, standard, and compressed air cutting 2 lens cutting heads with 130 mm focal length Compressed air cutting BrightLine CoolLine with 2 separate lens cutting heads 4 clamping jaws, 2 per pallet Wide transverse conveyor belt “Wavebelt” with tilting container Tilting container to the left of the machine More powerful compact dust extractor Connection piece for the exhaust duct of the compact dust extractor MDE interface

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 2, Tube cutting machine manufactured in 2011. This TRUMPF TruLaser Tube 7000 features a laser power of 3600W and an impressive X-axis travel of 6500 mm. It is equipped with a circular diameter of 200 mm, ensuring efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 7000 machine we have for sale. Contact us for further details. Kodpj Adry Eofx Ahaenc • Circular diameter: 200 mm

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Knodpfx Aez S Egishaec Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: ready for operation (used), TRUMPF 150 MQ VIS focusing optics SN:1277242-00769 + SN:1277243-00865, used, normal signs of use, 100% functional, scope of delivery as per photos. Kjdez Adbzopfx Ahajnc

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Knjdoz Adb Uopfx Ahajc

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 66 t, table length: 2,000 mm, overall weight: 5,400 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, This TRUMPF TruBend 3066 press brake features a pressing force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis back gauge (X/R/Z1/Z2) and operates with a rapid approach speed of 200 mm/s. If you are looking for high-quality bending capabilities, consider the TRUMPF TruBend 3066 machine. Knsdpez Sqn Eofx Ahaoc • Y-axis stroke: 200 mm • X-axis stroke: 600 mm • R-axis stroke: 150 mm • Back gauge axes: X / R / Z1 / Z2 (4 axes), motorized • Pressing force: 660 kN • Bending length: 2600 mm • Maximum table-to-beam distance: 347-432 mm, depending on tooling • Throat depth: Approximately 400-420 mm • Beam inclination / parallelism: ±3 mm • Rapid approach speed of the Y-axis: 200 mm/s • Working speed of the Y-axis: 15 mm/s • Retract speed of the Y-axis: up to 200 mm/s • Positioning accuracy (Y-axis): 0.01 mm • Mains supply: 400 V / 50 Hz • Connected load: 15 kVA PNEUMATIC TOOL LOCKING, WILA CLAMPING SYSTEM BEND GARD ALWAYS UNDER TRUMPF MAINTENANCE

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 25,379 h, For sale: professional CNC punching machine TRUMPF TruPunch 3000, manufactured in 2014. The machine is in very good technical and visual condition. The total operating time is only about 25,379 operating hours, which is a low number of operating hours for industrial TRUMPF machines of this age. The machine is sold together with punching tools. Currently, the unit is fully connected to the power supply, so before purchasing, you can inspect the machine in operation, check its functionality, and perform a test punching operation. Key information: Manufacturer: TRUMPF Model: TruPunch 3000 Year of manufacture: 2014 Type: Electric CNC punching machine Working table: 3000 x 1500 mm Capacity: 18T Kedpozxxhnjfx Ahasnc Operating time: ~25,379 operating hours Comes with punching tools If you have any further questions, we will be happy to answer them.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Knjdpfx Ahoz Iwvgeaec

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of manufacture: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLK outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (incl. automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and individual image transfer to the network (view of the first 2.5 m) Additional 10 m extension of the LLK between the laser and the machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine platform version (without steel structure) Connection to STOPA large storage systems (SKL or UL) Safety devices for storage connection incl. 2nd light barrier circuit Storage interface (without storage trolley) LiftMaster Compact (STOPA version) Knsdjzu Sqhspfx Ahaec TRUMPF laser: Solid-state laser TruDisk 8001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single-cutting-head strategy Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shutdown Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via the Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine cladding, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding all guarantees and warranties. Subject to prior sale. Machine can also be inspected.

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex-works: CNC Trumpf press brake Type Trumabend V 130 Year of manufacture 1996 Knsdpfxo Aa Iq Ss Ahajc CNC control Delem DA 65 Bending length 3060 mm Distance between uprights 2690 mm Upright overhang 410 mm Stroke 365 mm Installation height 535 mm Rapid traverse speed 200 mm/sec Working speed 1 – 10 mm/sec Return speed 135 mm/sec Table width 120 mm Angle adjustment plus/minus 10 mm Tools: one set of upper tools OW 209 with blade and one set of lower tools EV OO4/W 12, each 3000 mm Weight 12950 kg Price: EUR 10,750.00 plus VAT ex-works

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, overall weight: 5,400 kg, total length: 2,000 mm, Equipment: CE marking, documentation/manual, This TRUMPF TruBend 3066 press brake features a pressing force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis back gauge (X/R/Z1/Z2) and operates with a rapid traverse speed of 200 mm/s. If you are looking for high-quality bending capabilities, consider the TRUMPF TruBend 3066. • Y-axis stroke: 200 mm • X-axis stroke: 600 mm • R-axis stroke: 150 mm • Back gauge axes: X / R / Z1 / Z2 (4 axes) MOTORIZED • Pressing force: 660 kN • Bending length: 2600 mm Ksdpfjz Sqqtjx Ahajnc • Usable open height: Minimum clearance 167 mm • Maximum table-to-beam distance: 347-432 mm, depending on tooling • Throat depth: Approximately 400-420 mm • Beam inclination/parallelism: ±3 mm • Y-axis rapid traverse speed: 200 mm/s • Y-axis working speed: 15 mm/s • Y-axis return speed: up to 200 mm/s • Positioning accuracy (Y-axis): 0.01 mm • Mains power supply: 400 V / 50 Hz • Connected load: 15 kVA PNEUMATIC TOOL CLAMPING, WILA TYPE BEND GARD UNDER TRUMPF MAINTENANCE

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Knedpfx Asz S Nmmohajc Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg FEATURES CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain

Condition: excellent (used), Year of construction: 2006, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Machine type: hydraulic CNC bending press Manufacturer/Model: TRUMPF TrumaBend V1300 Year of manufacture: 2006 Operating hours: 109,800 h Approximate weight: 12,950 kg Performance data Knsdpfoz S D Tujx Ahajc Press force: 1,300 kN Bending length: 3,230 mm Free clearance between uprights: 2,690 mm Overhang: 420 mm Stroke: max. 215 mm Optional stroke: 445 mm Table-beam distance: max. 505 mm Optional table-beam distance: 735 mm Usable installation height: 385 mm Optional installation height: 615 mm Table width: 120 mm Working height: 1,050 mm Angle of ram: ±10 mm Back gauge and tool clamping Back gauge system: 4 axes Upper tool clamping: hydraulic Crowning: CNC Machine dimensions Length: 3,640 mm Width: 2,060 mm Height: 2,285 mm EQUIPMENT 4-axis back gauge system Hydraulic upper tool clamping CNC crowning

Condition: good (used), Year of construction: 2003, functionality: fully functional, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Kedpfxo Acm E Hs Ahasnc Model: TrumaBend V170 Year of manufacture: 2003 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat width (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil tank capacity: approx. 95 liters Hydraulic cylinder diameter: 190 mm Machine dimensions and weight: Total weight: approx. 18,000 kg External machine dimensions (W x D x H): approx. 5,000 x 2,210 x 3,100 mm. The machine is offered without tooling.

Condition: good (used), functionality: fully functional, Year of construction: 2007, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Ksdpjz Dumzofx Ahaonc Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 21,158 h, machine/vehicle number: A0217E0103, control type: NC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 21,158 h, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, The showcased laser cutting machine is in very good technical condition. It has been used exclusively in our production facility since new. The machine is currently in operation, so it can be demonstrated while running without any issues. It has been regularly serviced by qualified technicians and cleaned of current contaminants. The offered laser cutter is ready for immediate use and reports no errors or faults. Kjdoy Sgmnjpfx Ahaenc

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position Kjdpfx Ahez Rl Hyeaenc - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system