Used Trumpf Cn 901 for sale (390)

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 Kdodou Nuycspfx Aiijr (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Ksdpfxozu Avzj Aiisdr Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, overall weight: 12,000 kg, total height: 2,400 mm, This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Additional equipment • Closed machine frame with an integrated laser unit • Torque drive combined with direct linear drives • Enclosed beam delivery via fiber optic cable Kedpfx Aezvv A Dsiiedr • Water-air chiller for machine cooling • Integrated electrical cabinets with internal lighting • Automatic pallet changer (lengthwise installation) • Power supply through TruDisk integrated into the machine • Working area lighting • Wide longitudinal conveyor • Positioning laser diode Machine Benefits Technical Machine Benefits • Positioning accuracy: 0. 05 mm • Laser rated output: 3000 watts Extra Information The LiftMaster is included with the machine. Dimensions Machine Depth 9950 mm

Condition: ready for operation (used), Year of construction: 2013, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, total height: 2,200 mm, This 3-axis TRUMPF TRULASER 3030 FIBER was manufactured in 2013. A robust fiber laser cutting machine with a 3 KW power capacity, it features a large working area of 3000 mm x 1500 mm. It has been well-maintained by TRUMPF, ensuring reliability and precision. A great opportunity to buy this TRUMPF TRULASER 3030 FIBER machine we have for sale. Contact us for further details regarding this fiber laser cutting machine. Machine Benefits Technical Machine Benefits • Trumpf maintenance. Extra Information Kedpfozvvycsx Aiiodr Machine still under power Dimensions Machine Depth 9229 mm

Condition: ready for operation (used), Year of construction: 2013, controller manufacturer: SIEMENS, number of axes: 3, This TRUMPF TruLaser 3030 (L20) was manufactured in 2013. A robust CO2 laser cutting machine, it features a Siemens control system, a laser power of 3200W, and workpiece dimensions of 3000 x 1500 mm. With a travel speed of 140 m/min, it ensures efficient operation. Consider the opportunity to buy this TRUMPF TruLaser 3030 (L20) CO2 laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Ksdpozvu Skjfx Aiijdr • Working hours / laser beam on 49000 h • Longitudinal travel x-axis: 3000 mm • Cross travel y-axis: 1500 mm • Height travel z-axis: 115 mm • Travel speed: 140 m/min • Workpiece dimensions: 3000 x 1500 mm • Laser power: 3200w • Type of laser: truflow Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, laser power: 4,000 W, travel distance X-axis: 3,000 mm, overall weight: 11,500 kg, total height: 2,000 mm, product length (max.): 9,800 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 incl. Liftmaster was manufactured in 2007. It features a powerful 4,000 W CO₂ laser with a maximum workpiece weight of 900 kg and a maximum simultaneous speed of 140 m/min. The machine offers an impressive X-axis travel of 3,000 mm and Y-axis travel of 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details. • Laser Type: CO₂ Laser • Laser Source: TRUMPF TruFlow 4000 • Laser Power: 4,000 W • Laser Wavelength: 10.6 µm • Maximum Workpiece Weight: 900 kg Kedpfx Aszvpumoiiedr • Maximum Simultaneous Speed: 140 m/min • Positioning Deviation Pa: 0.05 mm • Average Positioning Scatter Band Ps max: 0.03 mm • Maximum Sheet Size: 3,000 × 1,500 mm • Max. Mild Steel Thickness: 20 mm • Max. Stainless Steel Thickness: 12 mm • Max. Aluminium Thickness: 10 mm

Condition: ready for operation (used), Year of construction: 2008, pressing force: 66 t, stroke length: 200 mm, throat depth: 400 mm, total width: 2,650 mm, total height: 2,400 mm, overall weight: 5,800 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: TRUMPF, Type: TruBend 3066 Year of manufacture: 2008 Technical data Manufacturer: TRUMPF Type: TruBend 3066 Year of manufacture: 2008 Bending length: 2040 mm Press force: 66 t Free daylight between uprights: 2364 mm Throat depth: 400 mm Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Drive power: 17 kW Dimensions: L 2.65 x W 1.85 x H 2.40 m Weight: 5650 kg Equipment - Electro-hydraulic upper drive - Block hydraulics - Controlled axes: Y1, Y2, X, R, Z1, Z2 - Automatic upper and lower tool clamping - Self-adjusting crowning system - Control system: Delem - Light curtain at the front for laser safety - Foot switch - Tool package consists of: Upper tool, straight, 28°, R1, 2000 mm, segmented Lower tool, V10, 84°, H100, 2000 mm, segmented Kdedpfjzu Tawsx Aiier All information is subject to change without notice.

Condition: ready for operation (used), Trumpf / Hüttinger 1456168 control box Flow 36-48kW SN: 200128104 - 13.56MHz E, used, in good condition, 100% functional, scope of delivery as per photos Ksdpfx Aijzu Hkpeiodr

Condition: ready for operation (used), Trumpf 1255448 Industrial PC / Industrie PC SW V4.2 HW Index A3 SN: 2918, used, in good condition, 100% fully functional, delivery as shown in photos Ksdpfx Aiszu Hk Neisdr

Condition: ready for operation (used), Trumpf 1488573 control SW V 6.2 / HW Index C1 SN:00569, used, normal signs of use, 100% functional, scope of delivery as per photos Kedpfx Ajzu Hlasiiodr

Condition: ready for operation (used), Trumpf 150 AQ VIS laser focusing optic 22-43-83-00/02 with 22-43-82-00/01 and 22-27-04-00/05, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Kdjdpszu Hlgsfx Aiijr

Condition: ready for operation (used), Trumpf 150 MQ VIS focusing optic 22-43-69-00, used, in good condition, 100% functional, scope of delivery as per photos. Kdsdpfx Aszu Hltjiier

Condition: ready for operation (used), Trumpf Kontron CP671 TASC-MFB / 31.193-1010.1/B02 board SN: 152734123, used, in good condition, 100% functional, scope of delivery as per photos. Kdjdpfjzu Hl Hox Aiisr

Condition: ready for operation (used), TRUMPF Laser 17x E11V 060050840, used, in good condition, 100% fully functional, scope of delivery as per photos Kedpfx Ajzu Hl Teiiodr

Condition: ready for operation (used), Trumpf test module for direct current, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kdodpozu Hmksfx Aiijr

Condition: ready for operation (used), TRUMPF 150 MQ VIS focusing optics SN:1277242-00769 + SN:1277243-00865, used, normal signs of use, 100% functional, scope of delivery as per photos. Kdsdpfx Aezu Hlmjiier

Condition: ready for operation (used), Trumpf 12-11-59-00/02 Radiation Protection B SN: , used, in good condition, 100% fully functional, scope of delivery as per photos. Kodpfx Aiezu Hkveisdr

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Kdjdpfezu Hlysx Aiier

Condition: ready for operation (used), Trumpf 12-12-30-A32/09 disc laser S/N 1804667-00097 + power cable, used, minor signs of use, 100% functional, scope of delivery as per photos Kdodpfozu Hk Ajx Aiier

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. Kodpfxezvdc Ss Aiiedr • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min Kedsyt I Axopfx Aiiedr frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane *

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) Kdodpoyuvcijfx Aiijr *

Condition: used, Year of construction: 1991, Technical details: pressure: 200 t Kodpfx Asy Alw Hsiiodr chamfer lenght: 4100 mm control: - distance between columns: 3200 mm stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m

Condition: ready for operation (used), Year of construction: 2022, operating hours: 731 h, pressing force: 51 t, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, number of axes: 7, This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details. • Drive: Dynamic electromechanical Torque Drive • Capacity and dimensions: • Free upright clearance: 1,305 mm • Usable installation height: 385 mm • Throat depth: 250 mm • Working height: 1,150 mm • Machine frame: Stable welded frame • Axes and backgauge: • CNC axes: 7 (Y, X1, X2, R1, R2, Z1, Z2) • Backgauge: 6-axis independent system (X1/X2/R1/R2/Z1/Z2), both units move independently • Backgauge features: Carbon-fiber fingers, hardened reference surfaces, helical rack Z-drive, flexible positioning • Travels / working range: • Y stroke: 215 mm • X travel: 240 mm (max backgauge range 500 mm) • R travel: 153 mm • Speeds: • Y rapid/return: 220 mm/s • Y working: 25 mm/s • X: 1,500 mm/s • R: 750 mm/s • Z: 2,200 mm/s • Positioning accuracy: • Y: 0.002 mm • X: 0.02 mm • Z: 0.02 mm • Crowning: • CNC-controlled crowning, automatic compensation via drive • Crowning drive integrated in the table • Suited for multi-station bending • Y-axis / press beam: • Inductive Y measuring system • Dynamic spring-back compensation with automatic force-based correction • Hardened adjustable guide strips • Control system: • TRUMPF Touchpoint TruBend, 21.5" TFT Full HD (1920×1080) • Intel Core i5 2.7 GHz dual-core, Windows Embedded Standard 7 • Realistic 3D visualization, TRUMPF technology database • User management with Standard/Expert/Administrator levels • 10 user access cards included • Data interfaces: • USB, RJ45, Ethernet 10/100 Mbit/s • Central Link, OPC UA • Internet teleservice / remote diagnostics • Tool clamping and setup: • Automatic TRUMPF upper and lower tool clamping (self-centering, hardened) • Fast segment change • LED Tool Indicator integrated in upper clamping (shows setup positions/next bend station) • Safety: • Automatic BendGuard (part of Productivity Package Plus) • Optoelectronic safety system with automatic tool-height setting • Allows max permissible Y speed with foot pedal • Automatic adjustment, movable out of working area for side processing • Electronically monitored side safety doors • Electrically operated lift-up rear doors • Emergency stop • Transport securing devices • CE marking • Ergonomic package: • Front support table • Front and rear LED work-area lighting • Support for seated/standing operation • Document shelf • Drawer for measuring instruments Additional equipment • Measuring equipment: • Digital angle gauge • Digital caliper • 90-degree edge square Kdjdpfxszu S Uae Aiior • 1x TecZone Bend license • Wireless 2D code reader with Bluetooth connection Technical Specification Bending Length 1530 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. Ksdpjzu S Dbefx Aiiodr • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026