Used Trumpf Trumatic 7000-1600 for sale (410)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps Hnedeylk Nxopfx Ab Tji - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,900 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 7,850 h, laser power: 3,200 W, punching diameter: 76 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, foot remote control, fume extraction, nozzle changer, quick-change device, safety light barrier, Laser TruFlow 3200, including LensLine with optimized standby Nozzle changing device Multitool drive system "Multishear" function "Multibend" function Tapping function High-speed "Marking" / "Ribbing" function Engraving function Rolling and deburring function Softpunch function Active Die Hnjdpfxox N Hyvj Ab Tsi Stripline Repositioning with pneumatic cylinders Vibration-dampened installation Chip conveyor with container Ball table work surface with brush inserts Blowing device SheetMaster (3000 x 1500) Automatic sheet separation system with lateral air blast Additional positioning guides for sheet size (2500 x 1250) Additional positioning guides for sheet size (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double trolleys with toothed belt drive (3000 x 1500) Loading and unloading unit Good part conveyor on punching side Good part conveyor on laser side Warehouse interface No. 21 RTC toolboxes incl. die holder plate

Condition: ready for operation (used), controller manufacturer: Siemens Sinumerik 840D, laser power: 2,400 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,750 mm, total length: 8,400 mm, total width: 7,800 mm, empty load weight: 22,500 kg, De machine is nog steeds functioneel en in gebruik. Uitgerust met: - 3 plaatklemmen - Sheetmaster-lossysteem - GripMaster Workpiece dimensions: 3085 x 1650 mm Type of Laser: Trumpf TLF Max cuttingthickness in steel: 8 mm Hnjdjygyvqjpfx Ab Tji Loading System: yes, SheetMaster

Condition: used, Year of construction: 1998, MACHINE WAS USED BY THE PREVIOUS OWNER SOLELY AS A PUNCHING MACHINE; THE LASER NEEDS TO BE CHECKED IF REQUIRED! Comes with TRUMALIFT SHEETMASTER 1606 Hnjdpfx Abjyar Dgj Tei TECHNICAL DETAILS Combined Punching/Laser Operation: 2,585 x 1,650 mm Punching Operation: 3,085 x 1,740 mm Laser Operation: 3,085 x 1,650 mm Performance Laser Power: 140 - 2,700 W Maximum Sheet Thickness: 8 mm Cutting Capacity – Mild Steel: 8 mm Cutting Capacity – Aluminum: 4 mm Cutting Capacity – Stainless Steel: 6 mm Maximum Punching Force: 220 kN Active Hold-Down (programmable in stages): 4.5 - 20 kN Maximum Workpiece Weight: 230 kg Speeds Max. Positioning Speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis Punching: 60 rpm Thread Forming: 180 rpm Stroke Rate Punching (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear Magazine: 18 tools with 3 clamps Tool Change Time: 1.5 - 5 s Precision Position Deviation: ±0.10 mm Mean Position Scatter: ±0.03 mm Programmable Chutes for Punching and Laser Parts (max.) Size: 500 x 500 mm TRUMPF CNC Control: Siemens Sinumerik 840D (base system)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 54,710 h, laser power: 4,000 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS X-axis working range: max. 2,550 mm Y-axis working range: max. 1,250 mm Control: Rexroth IndraMotion MTX Travel speeds X-axis: 100 m/min Y-axis: 60 m/min Simultaneous (X and Y): 116 m/min C-axis and stroke sequences C-axis punching: 330 rpm C-axis tapping: 330 rpm Max. stroke sequence punching (E = 1 mm): 1,200 rpm Max. stroke sequence marking: 2,800 rpm Tool technology Linear magazine: 22 tools with 3 clamps Number of tools when using MultiTool: 22 – 220 Tool change time: 0.3 – 2.8 s Laser Laser power: 4,000 W Laser type: CO₂ laser TruFlow 4000 Lens: 170 mm C-axis rotation: 360° Laser control: TASC Functions: Thread forming, MultiBend, MultiTool, deburring, and rolling technology Punching Punching force: 220 kN Punching head: electro-hydraulic Tool rotation: 360° Pressure clamp: programmable (active / passive / repositioning) MACHINE DETAILS Dimensions (L x W): 8,000 x 6,700 mm Height: 2,500 mm Weight: 24,100 kg Operating times Control operating time: 58,842 h Laser operating time: 54,710 h Beam operating time: 15,518 h EQUIPMENT - 3 Clamping clamps - Slag cone detection - Flap for laser parts 500 x 500 mm with sensor - 2 good part containers for punched and laser parts - Chip container - Ejection cylinder for laser parts - Quick-change device for cutting head - Punch slug extraction - Adaptive stroke calibration - Programmable hold-down device (active/passive/repositioning) - Tool length compensation - Active die Hedpfewhpbtjx Ab Toni - Parts conveyor belt at punching and laser station - Chip conveyor with tilting container - Blow-out device for small parts - SheetMaster with suction frame (36 suction cups, Y-axis 400 mm, V-axis 170 mm) - Skiving suction cup with vacuum sensor - Automatic clamp closing - Sheet thickness gauge for double sheet control - GripMaster with scrap skeleton tilting pallet (2,500 x 1,250 mm) - Double unloading cart - Parts conveyor belt Punching station - Parts conveyor belt, laser station - Storage interface - Table extension - Brush tables - Various safety devices

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Hnedpjw Suwysfx Ab Tei Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, workpiece weight (max.): 230 kg, TECHNICAL DETAILS Cutting force: 220 kN Hnedpfx Aewcqfpeb Tji Working area: 3,085 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Control Control: Bosch Trumagraph CC 220 MACHINE DETAILS Machine weight: 13,800 kg Space required: approx. 7,900 x 6,300 x 2,200 mm Electrical specifications Mains connection: 400 V, 50 Hz Connection power: 19 kVA Supply voltage: 400 V Control voltage: 24 V Required fuse: 3 x 35 A Compressed air Compressed air connection: 6 bar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,676 h, machine/vehicle number: KM-1148, laser power: 3,200 W, punching force: 22 t, punching diameter: 76 mm, sheet thickness (max.): 8 mm, workpiece weight (max.): 230 kg, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes Hnodpov Am Twjfx Ab Tei - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: good (used), functionality: fully functional, Year of construction: 1999, laser power: 2,400 W, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,740 mm, overall weight: 23,000 kg, total length: 9,100 mm, total width: 7,900 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Hnjdsymrn Ejpfx Ab Tei

Condition: excellent (used), Year of construction: 2006, laser power: 6,000 W, Used Low Cutting Hours Trumpf Trumatic L3050 6kw cnc laser cutting machine for sale Technical information: Year 2006 Hsdpfx Asrvhzmeb Tsni Workpiece dimensions 3000 x 1500 mm / 3metre x 1.5metre Type of Laser TLF 6000 Power 6000 Watt / 6kw Control Siemens Sinumerik 840D Longitudinal travel X-axis 3000 mm Cross travel Y-axis 1500 mm Height travel Z-axis 115 mm Travel speed 200 m/min Max cutting thickness in steel 25 mm Weight 12 ton Delivery and installation complete with tuition can be arranged.

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale Hnedsng Al Aepfx Ab Toi 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Fully serviced With manuals Good condition and can be seen working in production Complete with:

Condition: ready for operation (used), Year of construction: 2006, operating hours: 115,000 h, laser power: 5,000,000 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 5000 W laser source and includes a LoadMaster sheet loading system for enhanced automation. The machine has an operating hour count of approximately 40,000 hours with the beam on and 115,000 hours with the laser on. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO2 laser cutting machine we have for sale. Contact us for further details. • Control voltage: 24 V • Power supply: 400 V / 50 Hz • Total connected load: 105 kVA • Required fuse protection: 3 × 160 A • Compressed air connection: 7–10 bar Hedpfx Asyuw Dbsb Tsni • Nitrogen connection (N₂): 30 bar • Oxygen connection (O₂): 20 bar • Operating hours (beam on): approx. 40,000 h • Operating hours (laser on): approx. 115,000 h Additional equipment • Automation: LoadMaster sheet loading system

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, Used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Laser TrueFlow 2000 with laser power: 100-2,000 watts NC operating hours: 41,804 Resonator hours: 14,466 Beam-on hours: 2,054 Y-axis: 1,300 mm Additional equipment: various tools Recently installed new parts: Hnodjwkd Efopfx Ab Tsi Conversion to TASC5 laser control (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Year of construction: 2003, condition: good (used), Used quality Trumpf 5kw cnc laser 4metre x 2metre cutting bed Its just been serviced by Trumpf and outputting the same power as new. Very low hours for its age, very good condition, used intermittently on one shift and available to see in operation by appointment: Make – Trumpf Model – Trumatic L 4050 Laser type – TLF 5000TM / 5kw / 5000watts Hedpshcw Nzjfx Ab Tjni Year of manufacture – 2003 – commissioned 2004 Size – 4metre x 2 metre Features – Rotolas tube cutting facility (examples of parts just processed per photographs) Hours – Laser turned on 33861 – Beam on 11480 Fully serviced with Trumpf uk

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Hjdetltl Hepfx Ab Tjni Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min • Maximum iron thickness: 25 mm • Maximum stainless steel thickness: 25 mm • Maximum aluminum thickness: 15 mm Hnsdpfx Aboym A Hrs Tji Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed)

Condition: ready for operation (used), Year of construction: 1998, total height: 2,300 mm, overall weight: 13,800 kg, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar of compressed air. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg Hnsdpfox Uqzzex Ab Tei • X-axis working range: 2500 mm without repositioning • Y-axis working range: 1250 mm • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar • Includes a large set of punches, dies, and tool holders • The machine is in working condition. Dimensions Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,364 h, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details. Hnedpfx Aoynlhnjb Tei • Laser Power: 6000 W • Laser Type: CO₂ • Supply Voltage: 400 V / 50 Hz • Connected Load: 109 kVA • Control Voltage: 24 V • Required Fuse Protection: 3 × 160 A • Compressed Air Connection: 7–10 bar • Nitrogen Connection (N₂): 30 bar • Oxygen Connection (O₂): 20 bar • Working Area (Sheet Format): 3000 × 1500 mm

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, product length (max.): 3,800 mm, CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine. • Maximum sheet thickness: 4 mm • Maximum punching diameter: 38 mm • Working area without repositioning: 1000 x 1000 mm • Working area with one repositioning: 1000 x 2000 mm • X/Y axis speed: not specified • Rotation speed: 360 degrees per second (full rotation) • Maximum stroke rate: 340 strokes per minute • Control system: TRUMAGRAPH CC 200 • Automatic tool change: 9 tool stations • Power requirement: 15 kVA / 50 Hz • Documentation: Complete documentation included, together with machine history Hnsdpfoymz Rcox Ab Toi Additional equipment • Large set of tools • Two additional tables to extend the working area

Condition: ready for operation (used), Year of construction: 1999, operating hours: 51,135 h, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, overall weight: 13,800 kg, controller manufacturer: BOSCH, number of axes: 2, CNC punching machine manufactured in 1999. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 3,000 mm by 1,600 mm. It is equipped with a Bosch control system and is multitool capable. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details. • Programming system: Trumagraph • Supply voltage: 400 V / 50 Hz • Connected load: 19 kVA • Control voltage: 24 V • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar Hnedpfx Aeyn Dd Iob Tei • Multitool capable • Partially overhauled • Operating hours (mechanical counter): 51,135 h Additional equipment • 2 tools with cassette (for commissioning) • Documentation available

Condition: ready for operation (used), Year of construction: 2014, This TRUMPF TRUBEND CELL 7000 was manufactured in 2014. It's a high-speed automatic bending system, ideal for small to medium-sized sheet metal parts. Features include a press brake, robotic handling, and an integrated feeding system. The machine is in excellent condition, comes with a large set of bending tools, and is ready for loading. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 7000 machine we have for sale. Contact us for more information. Hnodpfx Absx D Hyps Tsi • Press Force: 360 kN • Bending Length: 1020 mm • Throat Depth: 300 mm • Large set of bending tools • ToolMaster Bend with Tool Identification System (TIS) • Additional loading pallet • Fully enclosed cell roof • LoadMaster gripper with flat suction cups and 4 electromagnets • Combined conveyors (pallet + belt system) • 1 additional clamp-type gripper with 2 pairs of jaws

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, number of axes: 3, This 3-axis TRUMPF Trumatic 120R was manufactured in 1991. It features a maximum punching force of 150 kN and a machine weight of 4,300 kg. With an estimated operational lifespan of 40,000–60,000 hours, this machine is designed for durability. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 120R CNC punching machine we have for sale. Contact us for further details. • Supply voltage: 380 V • Frequency: 50 Hz • Connected load: 9 kVA • Control voltage: 24 V DC • Required fuse protection: 3 × 35 A Hnsdpfoyn Ddbox Ab Toi • Compressed air requirement: 6 bar • Estimated operating hours: 40,000–60,000 (based on condition and guides)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 40,507 h, punching force: 22 t, travel distance X-axis: 2,500 mm, overall weight: 11,050 kg, controller manufacturer: BOSCH, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 2,500 mm. It is multitool capable and comes with 2 tools in a cassette for commissioning. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details. • Programming system: Trumagraph • Supply voltage: 400 V / 50 Hz • Connected load: 17 kVA • Control voltage: 24 V • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Multitool capable • Documentation available • Condition: Partially overhauled • Operating hours: 40,507 h Additional equipment Hjdpfxeyn Dkzs Ab Tjni • 2 tools with cassette (for commissioning)

Condition: ready for operation (used), Year of construction: 1996, overall weight: 18,000 kg, This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details. • Maximum punching force: 220 kN • Laser power: 1500 W • Laser type: TLF 1500 T • Laser nominal power: 54 kVA • Supply voltage: 400 V • Frequency: 50 / 60 Hz • Nominal current: 78 A • Required fuse protection: 3 × 80 A • Control voltage: 24 V DC Hjdoynk Exopfx Ab Tjni • Compressed air requirement: 7 – 11 bar • Power supply unit type: IS 11 / 13560 • Power supply output power: 11 kW • Power supply frequency: 13560 kHz • Laser system in operation for approx. 30000–40000 hours

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 6,500 mm, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm Hnjdpfx Ajx D I H Deb Toi • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training