Used Trumpf Trumatic L 2530 for sale (360)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. Iedpfjz R Aa Rsx Ap Deih - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each

Condition: used, Year of construction: 2006, A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement. Iisdpfx Aoz Sr Nksp Doh

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Ijdpfozd Ulaox Ap Dsih Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Ijdpjx Ap A Refx Ap Deih Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: ready for operation (used), Year of construction: 2006, laser power: 4,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, overall weight: 11,500 kg, total width: 5,300 mm, total height: 2,000 mm, product length (max.): 9,800 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 3030 was manufactured in 2006. It features a working range of 3000 mm in the X direction and 1500 mm in the Y direction, with a maximum positioning speed of 60 m/min. The machine is equipped with a TRUMPF CNC path control based on Siemens SINUMERIK 840D. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 3030 CO2 laser cutting machine we have for sale. Contact us for further details. • Max. positioning speed: 60 m/min (parallel to axes); 85 m/min (simultaneous) • Drive type: Maintenance-free three-phase AC servomotors on X, Y, Z • CNC control: TRUMPF CNC path control based on Siemens SINUMERIK 840D • Minimum programmable travel step: 0.01 mm • Positioning accuracy: ±0.1 mm • Average position dispersion: ±0.03 mm • Compressed air consumption: • With TLF 2000–3200: 31 m³/h (516 l/min) • With TLF 4000: 42 m³/h (700 l/min) • Laser power options (cw) and max. structural steel thickness: • TLF 2000: 2000 W / 12 mm • TLF 2700: 2700 W / 15 mm • TLF 3200: 3200 W / 20 mm • TLF 4000: 4000 W / 20 mm • Electrical connection and fuses (50 Hz / 400 V): Iodpfezf H Aaox Ap Djih • TLF 2000: 63 kVA / 100 A • TLF 2700: 71 kVA / 125 A • TLF 3200: 73 kVA / 125 A • TLF 4000: 88 kVA / 160 A Additional equipment • Dust extractor • Control cabinet • HF generator • Cooling unit

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Isdpfoxaph Ujx Ap Djih

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: Trumatic Lasercell 1005 (Type TLC 1005) Ijdpfxoz Rziko Ap Dsih Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Dismantling and transport preferably carried out by the buyer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 14,434 h, controller model: Siemens Sinumerik 840D, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: safety light barrier, TECHNICAL DETAILS Laser power: 4,000 W Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Sheet metal thickness, steel (max.): 20 mm Sheet metal thickness, stainless steel (max.): 15 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D Beam-on hours: 14,434 h Power-on hours: 39,875 h EQUIPMENT Closed machine frame with integrated laser unit Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo-radial blower, mirror telescope Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Maintenance-free three-phase AC servo motors Additional high-dynamic Xp-axis Iodsy Rk Uyepfx Ap Deih Cutting head quick-change device Laser cutting head with 5" lens and 7.5" lens Cutting gas pressure setting, programmable APC capacitive height control and process control Automatic focus position adjustment AutoLas Plus Laser power control Positioning laser diode HI-LAS high-pressure cutting Fast processing with SprintLAS ContourLAS for producing smaller holes PMS plasma sensor Automatic sheet metal edge detection Programmable power cycles Compressed air cutting PCS Process Control System Microweld Spraying device for safe thick sheet metal processing Automatic shutdown Work area lighting Workshop programming ToPs 100 lite Control: Siemens Sinumerik 840D Open control system based on PC, easy operation, online help, integrated e-shop, diagnostic function, maintenance log, technology data, teleservice Safety equipment: Multi-beam light barriers, beam guidance completely encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: A0220A0572, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens Simunerik, laser type: CO₂ laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, workpiece weight (max.): 710 kg, input voltage: 400 V, input frequency: 50 Hz, overall weight: 11,500 kg, total length: 9,300 mm, total width: 4,600 mm, total height: 2,600 mm, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, All services and overhauls carried out directly by the manufacturer (Trumpf). Inspection possible at any time. Assembly plan included. The machine was dismantled and stored with the assistance and supervision of Trumpf. Support with assembly and commissioning is also available upon request. Machine assembly plan attached to the documentation. The machine is being delivered including LIFTMASTER type LMZ3050 0556817 / 256417 / 9000 N load capacity / year of manufacture 2003. See details in the photos. Including loading and unloading cart Including longitudinal and transverse conveyor belts for small parts/waste Including safety barrier fencing The machine comes with a large spare parts inventory (price obtained from Trumpf: purchase value EUR 42,000.00). Isdox Rt Ddopfx Ap Doih See list in the attachment. Loading and transport of the machine was carried out by SCHWERLAST Austria (costs within Austria approx. EUR 6,000.00).

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 71,929 h, machine/vehicle number: A0220A0610, control type: NC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SIEMENS, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF4000, laser hours: 31,707 h, laser power: 4,000 W, type of cooling: water, total length: 3,000 mm, total width: 1,500 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Model Year: 2003 Resonator model: TLF4000 Total Cutting Hours: 14,124 hours Maintenance records are available for the machine since the year it was purchased. All functions of the machine are in working order. All maintenance has been completed thoroughly. The machine's RF tube has been recently replaced. The machine will be supplied with a Riedel cooling unit and a Vanterm suction unit. Total Operating Hours: 71,929 hours (This time only shows the number of hours the machine was on.) Total Laser Active Operating Hours: 31,707 (This time does not show the cutting hours; it only shows the hours the laser was active (on.) - In addition to sheet metal cutting, the machine also cuts pipes/profiles. - Cutting range: Black sheet metal 20mm max. Stainless steel: 8-10mm max. Aluminum: 5mm max. Ijdpfxszquhus Ap Doih - Pallet dimensions: 1500x3000mm All maintenance on the machine has been performed on time and completely. Documentation is available. There are no malfunctioning parts on the machine.

Condition: good (used), functionality: fully functional, Year of construction: 1999, laser power: 2,400 W, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,740 mm, overall weight: 23,000 kg, total length: 9,100 mm, total width: 7,900 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Iiedpfxjymrn Es Ap Dsh

Year of construction: 2003, condition: good (used), Used quality Trumpf 5kw cnc laser 4metre x 2metre cutting bed Its just been serviced by Trumpf and outputting the same power as new. Very low hours for its age, very good condition, used intermittently on one shift and available to see in operation by appointment: Make – Trumpf Model – Trumatic L 4050 Laser type – TLF 5000TM / 5kw / 5000watts Year of manufacture – 2003 – commissioned 2004 Size – 4metre x 2 metre Iodpfjhcw Nzox Ap Dsih Features – Rotolas tube cutting facility (examples of parts just processed per photographs) Hours – Laser turned on 33861 – Beam on 11480 Fully serviced with Trumpf uk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 24,314 h, machine/vehicle number: A0230A1231, laser power: 6,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine by 30.04.2026! Due to increased selling pressure, the auction period has been shortened and the reserve price reduced! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 100 mm Laser power: 6,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited Max. workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Positioning speed simultaneous (X+Y): 300 m/min Iisdsyynu Nepfx Ap Deh Max. sheet thickness steel: 25 mm Max. sheet thickness stainless steel: 25 mm Sheet thickness aluminum: 15 mm MACHINE DETAILS Power-on hours: 55,176 h Cutting hours: 24,314 h Control model: Siemens Sinumerik 840D Control features: - Open PC-based control system - Online support - Diagnostic functions - Maintenance logbook - Technology data - Remote maintenance Safety equipment: - Multi-beam light barriers and guard enclosure - Fully enclosed beam path with nitrogen ventilation - Monitoring system - Multi-chamber extraction and compact dust collector Paint finish: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with linear direct drives ADDITIONAL EQUIPMENT - Cooling unit - Logbook function - Automatic pallet changer - Laser power control - HI-LAS high-pressure cutting - PMS plasma sensing - Programmable power cycles - Programmable cutting gas pressure regulation - Laser cutting head with 5" lens and 7.5" lens - Quick-change system for cutting heads - Automatic sheet edge detection - APC capacitive height control and process monitoring - PCS (Process Control System) - Laser diode positioning - Automatic focus adjustment (AutoLas Plus) - Spraying device for safe thick sheet processing - Automatic shutdown - Work area lighting - Fully enclosed machine frame with integrated laser unit

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Iisdpfx Asn Nxw Djp Deh Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 115 mm Working area: 3,000 × 1,500 mm Workpiece weight: 710 kg Drive and control system Iodpfxjy D H Ipj Ap Doih Drive: TLF 3000 Turbo Laser power: 3,000 W Control unit: Siemens 840D Sheet thickness steel: 20 mm Sheet thickness stainless steel: 12 mm Sheet thickness aluminum: 8 mm MACHINE DETAILS Overall dimensions (L × W × H): 9,800 × 5,300 × 2,000 mm Machine weight: 11,500 kg

Condition: ready for operation (used), Year of construction: 2001, - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER Iisdpfx Aey T S Akop Djh X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 115 mm WORKING AREA: 3000 x 1500 mm SOURCE: TLF 3000 TURBO ; 3000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 11500 Kg OVERALL DIMENSIONS: 9800 x 5300 x 2000 mm NOTE: WITH LIBELLULA SOFTWARE

Year of construction: 1999, condition: ready for operation (used), Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible. Isdpfoy T N Ikex Ap Dsih

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Iiodpfxjyz Ap Re Ap Doh

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Iisdjzfaalopfx Ap Deh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 11598, controller model: SIEMENS 840D, laser power: 2,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF laser cutting system including LoadMaster! Submitting a bid requires collection by the deadline at the end of November! Iisdoxu Ihispfx Ap Djh TECHNICAL DETAILS Axes X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Working area: 3,000 x 1,500 mm Laser and Power Laser output: 2,400 W Laser unit: TLF 2400 TURBO MACHINE DETAILS Control: SIEMENS 840D Electrical Data Mains connection: 400 V / 50 Hz Connected load: 71 kVA Control voltage: 24 V Main fuse: 3 × 125 A Compressed Air and Gas Connections Compressed air connection: 6 bar Nitrogen (N₂) connection: 30 bar Oxygen (O₂) connection: 20 bar Dimensions & Weight Dimensions (L x W x H): 9,800 x 5,300 x 2,000 mm Weight: 11,500 kg EQUIPMENT LoadMaster

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit Iisdpfsz Rl Hysx Ap Doh - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: excellent (used), Year of construction: 2006, laser power: 6,000 W, Used Low Cutting Hours Trumpf Trumatic L3050 6kw cnc laser cutting machine for sale Technical information: Year 2006 Workpiece dimensions 3000 x 1500 mm / 3metre x 1.5metre Type of Laser TLF 6000 Power 6000 Watt / 6kw Control Siemens Sinumerik 840D Longitudinal travel X-axis 3000 mm Ijdorvhzmjpfx Ap Djih Cross travel Y-axis 1500 mm Height travel Z-axis 115 mm Travel speed 200 m/min Max cutting thickness in steel 25 mm Weight 12 ton Delivery and installation complete with tuition can be arranged.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Iodpfx Aoz Iwvgsp Doih

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 63,800 h, machine/vehicle number: A0270 A0050, control type: CNC control, controller manufacturer: TRUMPF, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 63,800 h, laser power: 5 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, table length: 6,050 mm, working length: 6,050 mm, working width: 2,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 2,000 mm, power: 87 kW (118.29 HP), overall weight: 24,000 kg, total length: 11,700 mm, total width: 3,900 mm, total height: 2,600 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, In working condition. Can be inspected in the workshop Iodpfx Ajxl Dt Aop Dsih

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 36,000 h, laser source manufacturer: TRUMPF, laser power: 4 W, overall weight: 13,140 kg, total length: 9,300 mm, total width: 4,600 mm, Manufacturer: TRUMPF Type: TRUMATIC L 3030 Year of manufacture: 2008 Table dimensions: 3000 x 1500 x 115 mm Power: 4000 Watts Control system: Siemens Sinumerik 840 D Max. thickness of sheet metal that can be cut / steel: 20 mm Max. thickness of sheet metal that can be cut / stainless steel: 15 mm Max. thickness of sheet metal that can be cut / aluminum: 10 mm Max. cutting speed: 60/85 m/min Iedpfxszy Huxs Ap Djih Accuracy: +/- 0.1 mm Length: 9,300 mm Width: 4,600 mm Height: 2,000 mm Weight: 13,140 kg