Used Rondamat for sale (21)

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate Rjdpjq Dzi Tjfx Abmsbt High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), Profile grinder Weinig model Rondamat 929 Redpjydd Ncefx Abmsbt

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. Rbedoycurlspfx Abmet POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Grinding wheel diameter max.: 225 mm grinding wheel diameter max.: 225 mm Largest tool diameter: 300 mm Smallest tool diameter: 80 mm Tool width max.: 230 mm tool width max.: 230 mm Rbodpfxslf H Tgs Abmjt Weinig Rondamat 929 knife grinding machine for producing profile knives. Production from a straight blank or regrinding of used knives using a template. * Incl. new coolant pump.

Condition: like new (used), Grinding wheel for Weinig Rondamat or similar sharpening machines. Manufacturer No.: 920 072 005 grain size: D 126 Redpfx Ajvl Hy Aobmsbt diameter: 150 mm

Condition: used, Manual planer knife sharpener Weinig Rondamat 931 for sharpening and grinding profile knives and straight planer knives in the planer head using templates. Max. tool width: about 230 mm Grinding speed: infinitely adjustable Rodpsw Au Rcofx Abmjbt Mandrel: 30 / 35 / 40 / 50 / 60 mm

Condition: used, consisting of: Decorative film + aluminum backing plate + circuit board. new decorative film (manufactured in 2019), Control panel 23 001 0078, ID no. 10017781 / 912053002, br. original circuit board cleaned and checked, br. original aluminum support plate, cable on request. Rjdpslkch Sjfx Abmjbt

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Rbodpfxjufcnqe Abmot Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW

Condition: ready for operation (used), Year of construction: 2004, Characteristics: The Rondamat 168 is extremely simple and as versatile as possible to operate. The machine sharpens straight planing knives, milling tools and circular saws. 40mm shaft Wet grinding Maximum tool diameter 350 mm Disc diameter 150 mm Maximum tool length 240 mm Tooth pitch min. 32 mm Tooth pitch max. 20 mm Rodpfx Aoh Txfdobmebt Main motor power 1.1 kW Total connection 1.5 kW

Condition: excellent (used), functionality: fully functional, Head Grinder Rondamat 925 + Weinig CAM 970 1. Rondamat 925 Grinding wheel diameter: 150-225 mm Grinding wheel width: - ceramic: 5 mm - borazon: 10 mm Grinding wheel bore: 60 mm Tool diameter: 100-230 mm Tool width up to 240 mm 2. CAM 970 Rodpfx Aoxyynxjbmsbt Tool measuring system

Condition: used, Sharpening machine for profile cutters and straight grinders. . Grinding interlocked in 2 axes. Rbedpfx Asnzkx Ssbmet Very easy to operate. Width of the tool max: 360mm Maximum cutting circle 350mm profile 300mm straight Minimum cutting circle 70mm Main motor power kW: 1.5 at 3000 rpm at 50 Hz. Wet grinding: Yes

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Various grinding wheels available, including a diamond wheel. Wheel diameter 150-225 mm, Tool diameter 100-300 mm, Tool width max. 240 mm, 2 mandrels, diameters 40 mm and 50 mm, Grinding spindle speed continuously variable 1500-3000 rpm, Clearance angle: Rjdswmy E Hjpfx Abmjbt Radial 10-30 degrees, Axial 0-20 degrees, For swivel heads up to 60 degrees, Coolant tank 50 liters, Very good condition;

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Rbodpfxoq Dzkus Abmet Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Year 2010 Technical data: Max. tool width: 330 mm Rjdpfx Abowvvylomsbt With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW

Condition: good (used), Weinig Rondamat R960 Rodpfx Abowzu N Aomjbt Year of manufacture: 2002

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Redpjwvql Njfx Abmobt Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: excellent (used), Year of construction: 2001, Stehle HK3 720S (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 720 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm Rbedpfjv T Rkhex Abmjt • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: like new (used), Year of construction: 2010, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Redsxlk Nqspfx Abmjbt Specification: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for grinding straight knives and profiling using a template. Grinding straight knives in a knife block. Hand-held grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazon 10 mm Grinding wheel bore: 60 mm Turning circle min./max.: 100 mm / 300 mm Tool width max.: 360 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700 / 2000 / 2400 / 3000 rpm Relief angle: Radial: (back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 liters Table travel 0 - 360 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Complete documentation.

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Rbodpsxiv S Ejfx Abmot

Condition: used, Planer and Moulder Weinig Type Unimat 500 for four-sided planing and profiling of timber. The machine features a memory system with electronic positioning (axial and radial) of spindles 2-5. With groove bed, compact cabin, and in very good original condition. Including: * Knife sharpening machine such as Rondamat 931 * Centrolock planing heads * Profiling knives * Spare knives * Extensive accessories. spindle: 5 spindle 1: Bottom / 40 mm spindle 2: Right / 7.5 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 7.5 kW / 40 mm spindle 5: Bottom / 40 mm Rbjdpfx Aboya Hh Tsmet working width: 230 mm working height: 120 mm Control: Memory System

Condition: ready for operation (used), Year of construction: 2001, Pos. 1 BKGD-1100 Double band saw 1 pc. - Year of manufacture: 1987 - Made in Sweden - Working height: 1000 mm - Largest cutting height: 350 mm - Largest distance between saw blade and pressure side: 250 mm - Largest distance between the saw blade and the flare side: 250 mm - Smallest distance between the saw blades: 13 mm - Cutting width: 100-120 mm - Blade length: 6300 mm - Feed rate: 10-60 m/min - Motor power (saw): 2x18.5 kW - Motor power (pump): 4 kW - Firing speed: 680 1/min - Feed roller tiltable, max.: 45° - Hydraulic tank: 95 litres - Tank for cleaning fluid: 2x10 litres - Weight: 3000 kg Pos.2 Weinig E1 High-Mech feed magazine 1 pc. - Year of construction: 2001 - Feed max.: 80 m/min - Workpiece length: 1800-6100 mm - Workpiece width: 50 -230 mm - Workpiece thickness: 12-100 mm Pos.3. Weinig Hydromat 23 6 spindle planer/ profiling machine 1 pc. - Year of construction: 2001 - Working width: 230 mm - Working height: 160 mm - Play arrangement: • 1. bottom 11 kW 6000 1/ min (joint) • 2. right 7.5 kW 8000 1/ min • 3. left 7.5 kW 8000 1/min • 4. top 11 kW 6000 1/ min (joint) • 5. top 7.5 kW 6000 1/ min (joint) • 6. bottom 7.5 kW 6000 1/min (joint) - Feed rollers in the table: 3 pieces - Feed, max.: 60 m/min - Counter bearing: for 1st, 4th, 6th spindle Pos.4. pull-out magazine 1 pc. - Year of manufacture: 2018 - Hungarian manufacturer - Outfeed conveyor: 6000 mm (driven) - Cross belt: 5 rubber conveyor belt (driven) Pos. 5. Metron 05C 100/200 metal detector 1 pc. Pos.6. Weinig Rondamat 960 profile knife grinding machine 1 pc. - Year of construction: 2002 - Grinding of planing knives and profile knives - Grinding disc D: 150/225 mm - Grinding disc width: 2,3,4,10 mm - Grinding disc bore: 60 m - Grinding disc motor power: 1.1 kW - Grinding disc speed: 1700,2000,2400,3000 1/min - with cooling unit - Working width, max.: 240 mm Redpjrqhggsfx Abmebt Pos.7. Weinig OptiControl tool measuring and display system 1 pc. Pos. 8. Weinig setting gauge 1 pc. - for planer blade adjustment in the planer head Pos. 9. Weinig Hydro planing heads, profile heads, tongue and groove set - 27 pcs. Pos.10. BÖHL Junior S-450 VA wrapping machine 1 pc. - Year of construction: 2002 - Wrapping machine for profiles and long goods - Product dimensions: • Width: 50-420 mm • Height: 20 -300 mm • Length: 1000 - infinite mm • Max. cross-section diagonal: 420 mm - PE stretch film thickness: 17-50 my - Roll diameter: 220 mm - Roll width: 125 mm - Feed rate: max. 20 m/min - Power: 3 kW - Infeed table - Outfeed table