Used Trumpf Trumatic 5000 R-1300 for sale (376)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Hodpfsxhfnaex Ad Dsfp Max. sheet thickness: 6 mm MACHINE DETAILS Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,628 h, General Data Machine weight 17500 kg Control Unit Model WIN NT Hedew Nb D Uspfx Ad Djfp Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN. Application Types Punching

Condition: good (used), Year of construction: 2004, operating hours: 73,056 h, functionality: limited functionality, machine/vehicle number: A0060A0266, Machine operating hours: 73,056 h Max. punching force: 220 kN Punching working area: 2,535 x 1,280 mm Max. sheet thickness: 8.0 mm Total connected load: 29 kVA Last commissioned: March 2024 Standard equipment Machine • Sturdy C-frame • Coordinate guide with integrated linear magazine • 21 tool stations • 3 clamps • Automatic part chute 500 x 500 mm Punching head • Hydraulic single-tool holder, 360° rotation • Adjustable hold-down force • Programmable hold-down device Hfodpfxjwduuko Ad Dop • Spray lubrication for punches • Punch slug extraction Safety • CE mark • Multi-beam light barriers • Rapid hydraulic shutdown • Bowing detection Extended equipment • Brush table with loading and unloading aid • Height-adjustable, individually opening clamps • Reloading cylinder • Vibration-damped installation • Chip conveyor Available additional options • Trumalift Sheetmaster • Trumagrip 2500x1250 mm • Trumatool 40 • Trumasort R4 • Trumasort L The machine is available immediately. Due to the last commissioning more than a year ago, malfunctions may occur during commissioning. The sale is ex works: dismantling, removal, loading, and transport are at the buyer's expense.

Condition: used, Year of construction: 2002, Working area 3000x1500 mm Max. punching force 220 kN Max. sheet thickness 6 mm Dimensions 7500 x 7500 x 2500 mm Machine weight approx. 17,500 kg Hjdpsxfh Tyefx Ad Defp

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,433 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Control: Siemens Sinumerik 840 D Punching force: 220 kN Max. sheet thickness: 8 mm Max. Sheet thickness for stainless steel: 8 mm Max. Punching diameter: 76.2 mm Working area and workpiece Working area: 2,585 x 1,250 mm Max. Workpiece weight: 200 kg Hedswcqf Nspfx Ad Dofp Speed and precision Max. Speeds: 100 / 60 / 116 m/min Accuracy: 0.1 mm MACHINE DETAILS Operating hours: 62,433 h Length: 6,100 mm Width: 6,760 mm Height: 2,500 mm Weight: 13,000 kg

Condition: good (used), Year of construction: 2001, Sheet thickness 8 mm Punching force 220 kN Working area 3000x1500 mm Siemens control Machine weight approx. 17500 kg Equipment - Scraper Change position control - Thread forming Hfjdpovbcqcsfx Ad Dsp - Marking - fast beading - Slotting - Multishear - Multibend - Offset resetting - Roller tools - Accessories: Set-up cassettes - Ball roller table

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Working area: 3,000 x 1,500 mm Control system: Siemens MACHINE DETAILS Machine weight: approx. 17,500 kg EQUIPMENT - Scraper alternating position control - Thread forming - Marking - fast beading - Slotting - Multishear - Multibend Hodjvi Iw Ropfx Ad Defp - Offset resetting - Roller tools - Set-up cassettes - Ball transfer table

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: Hedpom Ak Huefx Ad Defp X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Large format Hfjdexwnb Uspfx Ad Dop Stand alone Location on request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 50,115 h, MACHINE DETAILS Laser power: 2700 W X-travel: 2585 mm Y-travel: 1280 mm Hfodpfett Nr Tex Ad Dop NC: 50115 h Laser ON: 49819 h Beam time: 12287 h EQUIPMENT - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - Laser unit: TLF 2000 high-frequency excited CO2 laser, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 2700 laser incl. 7.5" cutting head for stainless steel - AutoLas Plus - MultiTool function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 2 x additional clamping claw - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, laser power: 3,200 W, punching force: 22 t, X Working area max.: 2550 mm Y Working area max.: 1250 mm Control: Rexroth IndraMotion MTX Laser power: 3200 watts Standard equipment: Machine - Stable, easily accessible C-frame - Moving ball roller tables - Linear magazine for tool stations and clamping claws - 22 tool stations, 3 clamping claws - Foot switch for closing the claws - Flap for punched parts 500 x 500 mm incl. sensor - Chip container - 2 good part containers (punching and laser side) - Initial filling of hydraulic oil - ContourLine - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Fast flap for laser parts 500 x 500 mm incl. sensor - Raisable laser cutting support - Slag cone detection TRUMPF Laser - CO2 laser TruFlow 2700 - Optimized standby mode - Maintenance-free turbo radial blower - High frequency excitation - Laser control TASC CUTTING HEAD - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine PUNCHING HEAD - Electro-hydraulic punching head - Hydraulic single tool holder - 360° rotation - Programmable hold-down device (active / passive / repositioning) - Tool length compensation - Spray lubrication of punch - Punch slug extraction - Level monitoring of thread forming and tool lubrication CONTROL - Open control based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via Internet - Automatic switch-off - Data transfer - USB interface - RJ45 network connection SAFETY - CE marking - Multi-beam light barriers - Quick hydraulic shutdown - Bulge detection - Calculation of filling level in the punching console + Laser TruFlow 3200 including LensLine and optimized standby + Nozzle changer + Thread forming function including thread counter + MultiBend function + MultiTool function + Deburring and rolling technology + Active die + Adaptive stroke calibration + Spray lubrication of die + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading aid + Blow-out device for small parts + 10 RTC setup cassettes with die plate Automation: + Sheetmaster for sheet metal 2500 x 1250 mm - Suction frame with 36 suction cups (Y-axis=400mm) - Movable suction bar (V-axis=170mm) - Peeling suction cup - Vacuum sensors - Sheet thickness gauge for double sheet control - automatic clamp closing - SheetMaster parallel to main time + Peeling system + Additional package with 9 suction cups + Unloading monitoring + SortMaster Pallet lengthways + GripMaster for sheet metal 2500 x 1250 mm + Scissor lifting table 400 mm + Tiltable scrap pallet 2500 x 1250 mm Hsdpfx Adoxbclvo Djfp + Toolmaster 70 + ToolMaster parallel setup + Parts conveyor belt punching station + Parts conveyor belt laser station + Storage interface

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Sheet thickness - max.: 6.4 mm Pressing force: 220 kN Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis travel: 2,000 mm Y-axis travel: 1,250 mm Positioning speeds Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Simulation positioning speed: 108 m/min Positioning speed rotary axis: 360 °/s Hjdpfx Aowur Dqed Defp Smallest programmable path dimension: 0.01 mm or 0.01° Tools Tool stations: 15 tools Tool change time: 1.5 - 6.5 s MACHINE DETAILS Machine dimensions: 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg

Condition: used, functionality: fully functional, Year of construction: 2001, machine/vehicle number: 700384, punching force: 18 t, overall weight: 9,200 kg, workpiece width (max.): 1,270 mm, working range: 1,270 mm, Equipment: documentation/manual, Punching machine in operation at our site in Liévin in the north of France. A large quantity of Trumpf tools available, delivered with the machine. Hodpow A Imqofx Ad Defp

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 15,971 h, laser hours: 15,971 h, laser power: 4,000 W, sheet thickness (max.): 8 mm, overall weight: 22,500 kg, Application by the end of 2024 - submission of bids obliges timely collection. Machine including special equipment and automation TECHNICAL DETAILS Working area: 2500 x 1250 mm Laser: TruFlow 4000 Laser power: 4000 W Hedpfxsu Rbg Es Ad Dofp Punching Max. sheet thickness: 8 mm Max. Workpiece weight: 200 kg Max. Punching diameter: 76.2 mm Liner arm magazine: 22 tool positions with 3 clamping claws Punching force: 220 kN Parts flap: 500 x 500 mm Control system Control type: Rexroth IndraMotion MTX Positioning accuracy: 0.1 mm Operating data Operating hours: 80,968 / 81,053 / 15,971 h MACHINE DETAILS Length: 8070 mm (basic machine) Width: 8550 mm (basic machine) Height: 2730 mm (basic machine) Weight: 22,500 kg (basic machine) EQUIPMENT - Standard - Adjustment device with programmable hold-down device - Foot switch for closing clamps - Ball tables - 2 good parts containers - Chip container - Transport and assembly device - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Liftable laser cutting support - LensLine - High-frequency excitation - Cooling unit - Laser control TASC 4 - Electro-hydraulic punching head - Tool length compensation - Adjustable hold-down force - Spray lubrication punch - Bulge detection - Level monitoring Thread forming and tool lubrication - Laser cutting head with 170 mm focal length - Universal cutting head quick-change device, UTI with bus connection - ControlLine - USB interface and RJ45 network connection - CE marking - Dual-beam light barriers - Protection against stray radiation - Compact dust extraction system EQUIPMENT - extended - TruFlow 4000 including LensLine - Active die - Spray lubrication die - MultiTool function - Thread forming function - Marking function - Engraving function - Rolling technology function - Adaptive stroke calibration - StripLine - Repositioning cylinder - Vibration-damped installation - Chip conveyor with container - Table extension - Special thin sheet machining - Brush tables - Blow-out device for small parts AUTOMATION SheetMaster 2500 x 1250 mm - Suction cup frame with 36 suction cups (y-axis = 400 mm) - Movable suction cup bars (v-axis = 120 mm) - Peeling suction cups - Suction cup plate module - Vacuum sensor system - Central lubrication - Sheet thickness gauge for double sheet control - Automatic clamp closing SheetMaster Loading and unloading parallel to production time Peeling system Unloading monitoring GripMaster 2500 x 1250 mm - Residual skeleton grippers with sensors - Residual skeleton pallet can be tilted ToolMaster with 40 stations Main time parallel set-up Trolley systems (2500 x 1250 mm on rails) Loading/unloading double trolley incl. storage interface Including 1 set of set-up cassettes with die plates (21 pieces)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Large format including Sheetmaster Hsdpfx Adexwnfgo Djfp

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, number of slots in tool magazine: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/fast beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Bulge detection - Chip conveyor Hfsdevxivmepfx Ad Dsp TECHNICAL DETAILS Punching working area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Signing stroke sequence: 2800 rpm Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Laser switch-on time: 29,826 h Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Consumption of laser gas CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored part slides for punching and laser station, ejection cylinder on laser slide - Laser unit: High-frequency excited CO2 laser, vibration-insulated, including cooling unit and laser control DIAS 3 - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick hydraulic shutdown, extraction and compact dust extractor, protective device against scattered radiation on the cutting head

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 13,549 h, laser power: 3,200 W, punching force: 22 t, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function Hfedjvzrb Depfx Ad Djp - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: ready for operation (used), Year of construction: 2006, operating hours: 52,092 h, functionality: fully functional, machine/vehicle number: A0010A0169, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, TECHNICAL DETAILS Working area X x Y: 1,270 x 1,270 mm Hfedswm Dciepfx Ad Dop Performance Max. sheet thickness: 6.4 mm Max. punching force: 180 kN Max. workpiece weight: 75 kg Speeds X-axis travel speed: 90 m/min Y-axis travel speed: 60 m/min Simultaneous travel speed (X + Y): 108 m/min Stroke frequency Punching frequency with 1 mm stroke: 900 rpm Punching frequency with 25 mm stroke: 420 rpm Marking frequency: 2,200 rpm C-axis: 3 rpm Tool system Linear magazine: 9 tools Number of tools with multi-tool (2 clamps): 9 to 90 tools Rotation of all tools: 360° Tool change time for single tool: approx. 3.5 s Multitool tool change time: approx. 0.9 s Max. punching diameter single stroke: 76 mm Max. punching diameter standard Multicut: 200 mm Part discharge Programmable parts flap – max. part size: 200 x 200 mm, sortable into 2 containers Control system Control type: TRUMPF CNC BOSCH Type 3 Workshop programming: ToPs 2000 MACHINE DETAILS Electrical connection: 400 V / 50 Hz Connected load: 17 kVA Electrical power consumption approx.: 8 kW Compressed air connection: 6 bar Compressed air consumption: 3 Nm³/h Dimensions and weight Space requirement (including light barriers): 4,100 x 5,700 x 2,070 mm Machine weight approx.: 8,000 kg

Condition: excellent (used), Year of construction: 2003, operating hours: 31,486 h, Medium format Operating hours: 31,486 h Hjdpfx Ajxl R I Tod Dsfp Price on request

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Hsdpfeunh D Dex Ad Dsfp Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: excellent (used), Year of construction: 2008, Operating hours: approx. 20,000 h Hfsdpfxexvqawo Ad Djp

Condition: excellent (used), Year of construction: 2006, laser power: 6,000 W, Used Low Cutting Hours Trumpf Trumatic L3050 6kw cnc laser cutting machine for sale Technical information: Year 2006 Workpiece dimensions 3000 x 1500 mm / 3metre x 1.5metre Type of Laser TLF 6000 Power 6000 Watt / 6kw Control Siemens Sinumerik 840D Longitudinal travel X-axis 3000 mm Cross travel Y-axis 1500 mm Height travel Z-axis 115 mm Travel speed 200 m/min Max cutting thickness in steel 25 mm Weight 12 ton Hfsdpervhzmjfx Ad Dep Delivery and installation complete with tuition can be arranged.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. Hjdpevu Syysfx Ad Dsfp TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Hfodpfx Adew Eilyo Dsp Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Hjdpfx Asng Al Ajd Djfp Fully serviced With manuals Good condition and can be seen working in production Complete with: