Used Tunnel for sale (1,025)

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, pass-through width: 1,400 mm, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Lhsdpfxext Idbo Akqon Height: 1850 mm

Condition: used, Year of construction: 2021, type of input current: three-phase, input current: 120 A, input voltage: 400 V, We offer this used Chiossi & Cavazzuti Tetris 6M 1900 drying tunnel with a 6-meter heating section, manufactured in 2021. Lhedpfx Akjztplmeqen Power: 72 kW Phases: 3P+PE Current: 120 A Voltage: 400 V Frequency: 50/60 Hz Weight: 2500 kg Serial number: 2637 Product code: 1390081 Year of manufacture: 2021 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2011, I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500 Year 2011 Working width 1400mm. Total length 3,70m Lhedst S Ehzspfx Akqjn Total power 71,55 kW Very good condition, available immediately.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Lodpfxjykqhfs Akqohn Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Lhjdpfx Askn Rz Hekqon Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VERSAJET II VJ-II-2-9090-4180 – Industrial Gas-Heated Textile Tunnel Dryer Professional industrial HEBBECKER VERSAJET II gas-heated textile tunnel dryer, manufactured in 2020 and designed for continuous, high-volume textile screen-printing production. The machine is equipped with a dual conveyor belt system (2 × 850 mm), allowing two production lanes to be used simultaneously. The touchscreen control panel provides convenient adjustment of the conveyor settings and drying temperature. The direct gas-heating system provides fast heat-up, high efficiency and uniform curing, while keeping electrical energy consumption very low compared with conventional electrically heated dryers. Key Features Manufacturer: HEBBECKER GmbH Model: VERSAJET II VJ-II-2-9090-4180 Year of manufacture: 2020 Serial No.: 2001948 Machine type: Industrial textile tunnel dryer Heating system: Direct gas heating Gas heating capacity: 40 kW Dual conveyor belt: 2 × 850 mm Heating zone length: 5,565 mm Electronic temperature control Temperature stability: ±2°C Fast heat-up time Designed for continuous industrial production Suitable for textile screen-printing curing and drying Heavy-duty industrial construction Low electrical energy requirement Quiet operation Dual Conveyor System The VERSAJET II is equipped with two separate conveyor belts, providing two parallel production lanes. The touchscreen interface provides individual conveyor settings, making the dual-belt configuration particularly useful when processing different garments, print types or production batches simultaneously. Energy Efficiency The dryer uses direct gas heating without a heat exchanger, allowing the gas energy to be transferred efficiently into the drying process. According to the manufacturer's specifications, the system can provide more than 50% energy savings compared with electrically heated dryers, depending on operating conditions and configuration. Technical Data Electrical supply: 400 V / 3-phase / 50 Hz Electrical power: 3.2 kW Current: 5.1 A Fuse: 16 A Gas heating capacity: 40 kW Gas pressure: 30 mbar Conveyor configuration: Dual belt Belt width: 2 × 850 mm Heating zone length: 5,565 mm Machine weight: approx. 2,100 kg The HEBBECKER VERSAJET II is an excellent solution for professional textile printing companies looking for a high-capacity, energy-efficient gas dryer with a dual conveyor system. Lhjdpfjy Ty Sgex Akqsn Machine available for inspection.

Condition: excellent (used), Year of construction: 2010, ADVANCED OPTIFREEZE | Linear Freezer Tunnel / Conveyor Freezer Tunnel IQF Manufacturer: Advanced Model/Type: Optifreeze Year of Manufacture: 2010 Power Supply: 400 V, 80 A Ljdpfx Ajx Timmekqshn Type of Conveyor Belt: Stainless Steel Mesh Belt Belt Width: 1300 mm Overall Dimensions (L x W x H): 8700 x 2500 x 3200 mm Control cabinet incomplete. The ADVANCED Optifreeze is an industrial, continuous-flow linear freezer tunnel designed for implementing continuous processes of rapid freezing of food products. Thanks to the use of a 1300 mm wide stainless steel mesh belt, the machine guarantees a high throughput and is ideal for meat, poultry, and fish processing plants, as well as for production lines for ready-to-eat meals (convenience food), and in the bakery and confectionery industries. The linear design, combined with appropriate airflow dynamics, enables uniform deep freezing and surface (crust) freezing. This prevents delicate products from clumping and sticking together, preserving their aesthetic appearance, structure, and natural moisture content after thawing. The freezer unit with dimensions of 8700 x 2500 x 3200 mm is characterized by a large working capacity while maintaining a compact, continuous-flow design.

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Ljdpfjt S Efgox Akqehn Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Very good condition, available immediately.

Condition: good (used), Icon Engineering Steriliser tunnel Stainless, cold water steriliser tunnel, stainless chain belt, belt dimensions 1800mm x 360mm, max product height 250mm, variable speed, with recirculation pump, air knife, 3Ph Lodpfx Aszzf E Ejkqehn

Condition: used, Angle sealing machine with shrink tunnel For sale is a professional, semi-automatic angle sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. It is ideal for quickly and professionally shrink-wrapping cardboard boxes, books, bottles, textiles, or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The angle sealer works with a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculation system with adjustable air deflectors. This ensures a completely even heat distribution and a perfectly smooth shrinking result – even with demanding product geometries. Lodpfez Dtf Ajx Akqshn Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar, and tunnel temperature to be adjusted precisely to the film thickness used (PO, PE, or PVC). Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid conveyor belt. It reliably transports even heavy packaged goods (e.g., printed materials, canned goods, or wooden parts). Ergonomic infeed table: The separate, mobile preparation table allows for quick and easy threading of products into the half-tube film. The film unwinding is smooth and easy thanks to the ball-bearing system. Perfectly suited for printing companies, logistics centers, laundries, or contract packers for shrink-wrapping: - Cardboard boxes and multi-packs - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle carriers and cans Technical data & features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Angle sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid conveyor belt in the shrink tunnel Mains voltage: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design, in the tunnel opening) Net weight: approx. 400 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2001, I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Year 2001 Working width 1400mm. Total length 4,00m Total power 74,3 kW Very good condition, available immediately. Lhedpfx Aei Eup Ejkqon

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. Ljdpfjy Evirox Akqehn - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: ready for operation (used), functionality: fully functional, Sérifroid SG900 Twin Tunnel Freezer The Sérifroid SG900 Twin tunnel freezer enables continuous freezing with high consistency while preserving product quality. It is designed for production facilities seeking a stable throughput and precise temperature control. Thanks to its dual-tunnel architecture, air circulates uniformly around the products, ensuring controlled temperature reduction from the beginning to the end of the cycle. This control improves the final texture, minimizes water loss, and ensures a consistent appearance for every batch. The stainless steel conveyor belt ensures smooth product flow. Additionally, the 80 mm polyurethane foam insulation minimizes heat loss, improving energy efficiency. The system operates with CO₂ (R744), a refrigerant that delivers high thermal performance while meeting environmental standards. The SG900 Twin also features automated regulation to maintain freezing parameters without constant monitoring. The operator only needs to intervene to adjust recipes or throughput, streamlining day-to-day operation. Defrosting is quick and pre-programmed; a 20-minute cycle every 8 hours is sufficient to keep the tunnel operating at peak efficiency. This reduces downtime and supports continuous operation. Furthermore, the freezer integrates easily into existing processing lines—whether in bakeries, charcuterie, or ready meal production. Process consistency boosts overall yield while ensuring final product quality. The SG900 Twin is thus an excellent investment for facilities aiming to increase capacity and achieve stable, repeatable freezing results every day. Lhodpexr Al Dsfx Akqjn Technical specifications: - Freezing capacity: 250 kg/h - Tunnel length: 2 × 9.6 m (19.2 m) - Usable width: 2.6 m - Insulation: 80 mm polyurethane - Refrigerant: CO₂ (R744) - Cooling capacity: 35 kW - Evaporation temperature: –40°C - Defrost: electric, ≤20 min / 8h

Year of construction: 2021, condition: excellent (used), 1 x Selmi cooling tunnel Belt width 600mm Belt length 12 meters. * Manufacturer: Selmi Chocolate Machinery * Model: TUN1200 Ledpozz I Ntofx Akqohn * Year: 2021 * Voltage: 380V / 3 Phase / 50Hz * Serial No.: TUN1200001216 * Manufactured in Italy

Condition: excellent (used), 585 USED Thermo-oil tunnel oven DAUB-KAAK. EXTERNAL DIMENSIONS (in cm): - W: 400 - L: 2500 Lodpez Rivlsfx Akqehn - H: 300 + 100 (at the end) - working dimensions of the belt: width 2.4 m x length 20 m TECHNICAL DATA: - number of levels: 4 - baking area: approx. 190 m2 EQUIPMENT: - bread or roll feeder for the oven - unloading the oven - conveyors transporting bread after baking about 20 m - spraying with water before and after baking - without heating boiler and burner - without steam generator The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 2025, Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens S7-1200 with a 12" Siemens HMI touch screen showing the full process mimic with zone temperatures. Year of manufacture 2025, new. Technical details - Year of manufacture: 2025, new - Capacity: 2,400 bottles/h at 500 ml, Ø 53 mm - Capacity: 1,800 bottles/h at 500 ml, Ø 70.3 mm - Capacity: 2,000 cans/h at 500 ml, Ø 66 mm - Container sizes: cans and bottles of 500 ml, 330 ml and 200 ml - Pasteurization temperature: +70 °C, 10 minutes residence time - Product temperature: +10 °C at the inlet, +37 °C at the outlet - Total production cycle: 41 minutes - Zones: 8 (3 x heating, 1 x pre-pasteurization, 1 x pasteurization, 3 x cooling) - Heating: steam, plate heat exchanger mounted on the side of the tunnel - Steam requirement: 143.6 °C at 3.6 bar, 130 kg/h in stable operation, 170 kg over the first 30 minutes at start-up - Water consumption: 0.2 to 0.3 m³/h in stable operation - Compressed air: 500 to 700 l/h at 6 bar - Total power consumption: 8 kW - Supply voltage: 400 V, 3 ph, 50 Hz; control voltage 24 V DC - Degree of protection: IP 54 - Overall dimensions: 6,500 x 2,200 x 2,200 mm (L x W x H) - Working area: 6.2 m², built from one module - Conveyor working height: 1,150 ± 50 mm - Material: AISI 304 stainless steel Equipment - U-shape tunnel, infeed and outfeed on the same end of the machine - Eight temperature zones with energy recovery between the zones - Plate heat exchanger for steam heating, mounted on the side of the tunnel - Siemens S7-1200 control system - Siemens 12" HMI touch screen with process mimic and zone temperatures - Electrical cabinet in AISI 304 stainless steel - Multi-row infeed and exit belt conveyors with Movex belt - Hinged inspection hoods over the treatment zones - Spray bars over the full tunnel length Lhodpfxsz Eqdxs Akqjn Condition and availability - New machine, year of manufacture 2025 - Available from 1 March 2027 - Location: Belgium

Condition: used, net length ± 18.300 mm net width ± 1.800 mm max. product height ± 85 mm 3 evaporators motor compressors not included (required capacity ± 224 kW) dimensions cell (not included) (l x w x h) : ± 18.300 x 3.580 x 3.447 mm evaporation temperature: - 42°C medium : ammonia/freon capacity 1.500-2.000 kg/h (depending on the product) machine is modular and can be shortened by ± 1/3. Lodpfx Aksz Ixxpsqjhn

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,397 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: ± 40° Fuel tank capacity: 540 l Lhedpfx Aksytpxhjqjn Hydraulic tank capacity: 550 l Tyre size front/rear: 18.00 - 25 Axle load front/rear loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Engine: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permitted cross slope: 15% Max. permitted gradient: 28% Turning radius outer/inner: 6,713 / 3,547 mm Bucket capacity (SAE, heaped): 5.4 m³ Maximum speed loaded forward / reverse on level ground: 25.0 km/h Exhaust system: Silencer / Catalytic converter Main dimensions: 9,715 x 2,600 x 2,450 mm (LxWxH) Axle load front/rear unloaded: 13,100 / 16,900 kg Operating weight: 30,000 kg Payload: 11,000 kg

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Lsdpsyuztgofx Akqehn Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: used, Year of construction: 2017, Overview Ledpfx Akozxnu Djqshn Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width 600 mm hood with electromechanical lifting system Suitable for steam injection (to heat up and to improve product yields) Lsdo Adqplspfx Akqjhn 135 kW / 195 A suitable for CIP cleaning system conveyor washing system Conveyor speed (min/max): 1.2-12 m/min outside dimensions (l x w x h) : ± 7.316 x 2.200 x 2.985 mm

Condition: good (used), E Shrink Packaging LB-728 + LB-201 Angle Sealer with Shrink Tunnel This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply place the goods to be packaged on the conveyor belt, and the machine does the rest. Machine parameters are set from the control panel. Sealer dimensions: 565x460mm Tunnel entry dimensions: 370x230mm Weight: 550kg Power supply: 380V Installed power: 14 kW (total peak power, continuous operation max. 5 kW) Lodpfx Akoz R Iqzoqjhn Capacity: approx. 1560 pcs/h

Year of construction: 2016, condition: used, Shrink film packaging line Manufacturer: LCR Group Ledpfx Aks Ad If Rsqehn Year of manufacture: 2016 Packaging line consisting of: Infeed table 3000 x 1800 x 880 mm Film station with film cutting 1000 x 3000 x 2150 Buffer conveyor table 5500 x 1500 x 880 mm Side sealing and trimming of excess film 1200 x 3000 x 1300 Shrink tunnel 4600 x 2300 x 1900 Outfeed table 3000 x 1800 x 880 Note: Vacuum lifters at the infeed/outfeed are available as an option for an additional charge. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Lhodpfx Akoxl Tnpjqjn

Condition: good (used), Italdibipack Mecpack FS + FornoTouch 5525EV Sealer with Shrink Tunnel Made in Italy. This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply insert the product into the shrink tunnel, and the machine does the rest. Machine parameters are set from the control panel. Sealer dimensions: 600 x 500 mm Tunnel entry dimensions: 550 x 250 mm Weight: 770 kg Power supply: 380V Installed power: – sealer 2.5 kW, – tunnel 7 kW. Capacity: approx. 2,400 pcs/h Lhjdpfx Akez R Iq Ijqen Includes a short roller conveyor for product removal.