Used Tunnel Dryer for sale (2,663)

Condition: used, functionality: fully functional, Textile Tunnel Dryer. Good working condition. Please check out our other listings as well. Dsdpfxsv U D Uce Acpoku

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Dodpfx Acoyuztgepeku Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VERSAJET II VJ-II-2-9090-4180 – Industrial Gas-Heated Textile Tunnel Dryer Professional industrial HEBBECKER VERSAJET II gas-heated textile tunnel dryer, manufactured in 2020 and designed for continuous, high-volume textile screen-printing production. The machine is equipped with a dual conveyor belt system (2 × 850 mm), allowing two production lanes to be used simultaneously. The touchscreen control panel provides convenient adjustment of the conveyor settings and drying temperature. The direct gas-heating system provides fast heat-up, high efficiency and uniform curing, while keeping electrical energy consumption very low compared with conventional electrically heated dryers. Key Features Manufacturer: HEBBECKER GmbH Model: VERSAJET II VJ-II-2-9090-4180 Year of manufacture: 2020 Serial No.: 2001948 Machine type: Industrial textile tunnel dryer Heating system: Direct gas heating Gas heating capacity: 40 kW Dual conveyor belt: 2 × 850 mm Heating zone length: 5,565 mm Electronic temperature control Dsdpfx Acsy Ty Sgopsku Temperature stability: ±2°C Fast heat-up time Designed for continuous industrial production Suitable for textile screen-printing curing and drying Heavy-duty industrial construction Low electrical energy requirement Quiet operation Dual Conveyor System The VERSAJET II is equipped with two separate conveyor belts, providing two parallel production lanes. The touchscreen interface provides individual conveyor settings, making the dual-belt configuration particularly useful when processing different garments, print types or production batches simultaneously. Energy Efficiency The dryer uses direct gas heating without a heat exchanger, allowing the gas energy to be transferred efficiently into the drying process. According to the manufacturer's specifications, the system can provide more than 50% energy savings compared with electrically heated dryers, depending on operating conditions and configuration. Technical Data Electrical supply: 400 V / 3-phase / 50 Hz Electrical power: 3.2 kW Current: 5.1 A Fuse: 16 A Gas heating capacity: 40 kW Gas pressure: 30 mbar Conveyor configuration: Dual belt Belt width: 2 × 850 mm Heating zone length: 5,565 mm Machine weight: approx. 2,100 kg The HEBBECKER VERSAJET II is an excellent solution for professional textile printing companies looking for a high-capacity, energy-efficient gas dryer with a dual conveyor system. Machine available for inspection.

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier Dkodpfx Aoyzaamecpsu YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Dkjdpfx Acoyf Hlijpju Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL POLYMERIZATION SYSTEM consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Dodeyalc Nspfx Acpsku Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 3340 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Common control cabinet for two drying tunnels 2000 x 1600 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system is on the left Weight of the complete system approx. 2500 kg (Subject to changes and errors in technical data, as well as prior sale)

Condition: used, Year of construction: 2006, Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: T20-3 KMT - Year of manufacture: 2006 - Machine type: bottle dryer (air knife tunnel) - Conveyor: plastic chain, 120 mm wide - Power supply: 400 V, 3 phases, 50 Hz - Control voltage: 24 V DC - Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment - Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts - Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers - Siemens SIMATIC touch panel (French, Dutch, German) with output counter, selector switches and emergency stops - Control cabinet with four Danfoss VLT 2800 frequency converters - Stainless steel frame on adjustable feet, enclosure with transparent hinged guard doors - CE marked Condition Dksdpoz Hb Nujfx Acpju Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Dkodoyy U I Nepfx Acpju Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: used, Year of construction: 2016, with a new conveyor belt. Dsdpfxezf N Rgj Acpeku Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. Dedpfx Acsy Eviropoku - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Dedpfozg Iw Iox Acpoku Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Dsdpfx Acozf Ivujpsku Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Dodpfx Aszvgiuecpsku Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Dkodey R Tdwepfx Acpeu

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Dksdpfx Aoy Iplfscpju Very little use Ex Pharma Facility

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, power: 100 kW (135.96 HP), conveyor belt length: 4,000 mm, product height (max.): 100 mm, machine/vehicle number: 5-199, TECHNICAL DETAILS Freezing capacity: 100 kW / 29.41 tons Net belt width: 1,250 mm Freezing belt length: 4,000 mm Maximum product height: 100 mm Adjustable dwell time: 0.5–20 min Number of high-speed fans: 6 Dkjdpjz I Ticsfx Acpou MACHINE DETAILS Voltage: 380–500 V Frequency: 50–60 Hz Power consumption: 5 kW EQUIPMENT Stainless steel construction Stainless steel net belt 6 adjustable internal high-speed fans Stainless steel control cabinet Siemens PLC Siemens Simatic touchscreen HMI

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Dedpfx Acoq Igyvjpeku Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), Year of construction: 2013, 1x Digicolor dryer, as shown in the pictures. Djdpfxjz Inngj Acpjku

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 14,000 mm, total width: 2,500 mm, total height: 2,500 mm, overall weight: 5,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, MAGNUM LABORA ROTARY DRYER + 750 kW FURNACE – CAPACITY up to 1 t/h For sale: a complete Magnum rotary dryer from Labora, along with a 750 kW furnace, designed for drying sawdust and biomass. Dryer capacity: up to 1 t/h of dry material, depending on the moisture content of the input material and the required final moisture content. The dryer is complete, installed, and operational. It is possible to view the equipment in operation on November 15th. After this date, it will be dismantled due to the installation of a larger dryer. The installation includes, among other things: - Magnum Labora rotary dryer, - 750 kW furnace, - raw material feeding and shredding system, Dkjdpfsz Iq Rkox Acpsu - fan and exhaust and chimney system, - dust collection and steam extraction system, hot air discharge system, spraying system, - automation system with control cabinet, - temperature measurement and process monitoring, CO detection The installation is used for drying wood sawdust for pellet production. Sale includes the complete set, including the furnace and the raw material shredding mill. I can send a video of the equipment in operation via WhatsApp. Price: 350,000 PLN net Location: West Pomeranian Voivodeship

Condition: excellent (used), Year of construction: 2010, PROD. ATLASCOPCO TYPE FD285 S/N CAQ434195 YEAR 2010 POWER (kW) 2.2 CAPACITY (m3/min) 17.1 PRESSURE (bar) 14 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER R410a 1.28kg Dsdpoz Izfrjfx Acpsku EXCHANGER COOLED (AIR/WATER) ON THE TANK DOCUMENTS CONNECTION 2 1/2 NEW/USED USED

Condition: good (used), Year of construction: 2015, 1x Digicolor dryer, as shown in the pictures. Djdpfx Aoz Inm Aecpjku

Condition: excellent (used), Year of construction: 2004, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from the premium manufacturer Ultrafilter (Donaldson). Dkjdpfx Aezwl Rgscpsu This system was specifically designed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries, or electronics manufacturing. The system removes moisture in a 5-stage process and also cleans the compressed air extremely efficiently from oil vapors, particles, and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Voltage supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ removal: Inlet max. 1000 ppm → Outlet max. 100 ppm - Container test overpressure: 20.8 bar - Year of manufacture: 2004 Dimensions (H x W x D): 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2002, Ultrafilter LP 0072 Compressed Air Treatment Dryer Djdpfszwmacsx Acpeku Industrial adsorption dryers and CO₂ purifiers from the premium manufacturer Ultrafilter (Donaldson). This system was specifically developed for applications that require absolutely ultra-pure compressed air – ideal for operating laser cutting systems, the pharmaceutical and food industries, or electronics manufacturing. The system removes not only moisture in a 5-stage process but also cleans the compressed air extremely efficiently from oil vapors, particles, and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Voltage supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ removal: Inlet max. 1000 ppm → Outlet max. 100 ppm - Container test overpressure: 20.8 bar - Year of manufacture: 2002 Dimensions (H x W x D): 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 1992, This Werner Koch drying and conveying system, type 6120 and OKT 85, is being auctioned online as part of our industrial auction/machine auction due to the closure of Trola GmbH – including machinery, workshop equipment, plastic parts, and material handling equipment. Dkedpfjz Ndansx Acpju You can find this and many other items on our platform.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Two material handling devices Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! Dkodpezaum Dofx Acpsu PRICE REDUCED FROM 3550 TO 3250 EUR!