Used Tumble Dryer for sale (1,844)

Year of construction: 2006, condition: ready for operation (used), AUTOMATIC FRONT-LOADING SECCIONADORA AUTOMATIC FRONT-LOADING OF OCCASION Make: SCM Model: SIGMA IMPACT Bledpfx Agjhkr A Sjlsc year 2006 CE regulation Useful cutting dimensions: 3200 x 3200 mm. Cutting height 67 mm 3 long first air tables and two shorter wide air tables 6 Pneumatic clamps Main saw motor 10 HP Scorer. PC. WINCUT software.

Condition: used, Year of construction: 2010, functionality: fully functional, Used Mark compressor with dryer. Used, in good working condition. Ready for pickup. Bledpfx Aswprviogloc

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Bodsrp D Uxspfx Aglslc Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Bedoxaxr Nspfx Aglslc Complete with three filter set

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote. Bsdpfx Agjwx E Nbsljlc

Condition: like new (used), Chanber size: Bjdpfx Asd Sm Dijglelc 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Bljdpfx Agoq Igyvslsc Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: Blodpfsq Nfuzjx Agljc - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11165/1, working width: 1,300 mm, workpiece height (max.): 40 mm, TECHNICAL DETAILS Bodpfx Agoydn S Islelc Max. working width: 1,300 mm Max. processable thickness: 40 mm EQUIPMENT Drying system with 3 UV lamps Transport system with motorized rods Separate control cabinet

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Bsdpfjygvniox Aglslc

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Click on the link below to see a video of the machine running. Blsdpsygvmrefx Aglec

Condition: used, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. Bljdoygvmlopfx Agljc

Condition: used, Used Aeromatic model MP1 stainless steel fluid bed dryer. Stainless steel filter chamber approximately 16 litre capacity with a maximum product volume of 13.5 litre which is hinge mounted and removeable. Operating pressure is 6 bar. Driven by a 3.3kw 3/50 supply. Reportedly minimum batch weight 400g and maximum batch weight 6 kg. Bljdpfsygvmfex Agljc

Condition: used, Reportedly very little used and only ran for validation, Niro model MP1 stainless steel multi processor fluid bed dryer/granulator/coater. Can be used for drying, top spray fluid bed granulation and bottom spray powder, pellet & tablet coating. Filter chamber includes 12 litre product bowl which is hinge mounted and removable. Also includes cylindrical expansion chamber and hinge. Has flange, Sightglass and lamp. Inlet air handling includes inlet air preparation unit with G4 inlet filter, steam air heating coil, face/bypass damper with actuator and F8 fine filter. Also has Ventex ESI-R (10 bar) inlet explosion protection valves including controls. Process air bypass system includes additional regulating valves to allow air to bypass the processing chamber. Fan is 10 bar pressure shock resistance with negative static pressure head to 14,000 pa driven by EEXD motor. Control system is Siemens S7/300 and 11a=MP-11A370 for location in zone 2 area. Includes product temperature sensor and indication. In addition to standard unit it includes additional 16 litre stainless steel product container and sample socket with perspex flask. Includes top spray lance assembly with nozzle set and through the wall peristaltic pump. Has Precision coater insert for 12 & 16 litre containers with pellet retaining element and additional nozzle inserts. Has secondary dust filter for use with the Precision coating process (10 bar PSR). Also has PRE heater and humidification coil. Includes dehumidification unit and H13 Hepa inlet filter. Also includes exhaust police filter with EPV and batch data recording system, data recording and trending package. Supply voltage 380 volt 3/50. Reportedly minimum batch weight 0.16 kg and maximum batch weight 6 kg. New 2005 and last used on 1.5-5 kg batches. Reportedly little used and in excellent condition. Bjdpfsygvarjx Aglelc

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Bjdpfx Ajygndpsglelc Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 Bledpfx Agoxfkbaslec - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Used APV Anhydro model PSBD 58 stainless steel spray dryer. Unit rated approximately 50 kg/hour water evaporation rate (depending on product) at inlet/outlet temperatures of 600/140°C. Drying chamber approximately 1600 mm inside diameter x 1800 mm cylindrical height x 1500 mm conical height. Chamber has a safety rupture plate buti is not connected. Outside is insulated and claded by stainless steel plate. Inspection doors 450 x 550 mm. Unit includes (1) top mounted Anhydro nozzle co-current atomiser (could be used rotary atomiser but is not included). Unit includes 2 zones electrical air heater, Herding carbon steel filter, cyclone and ventilator. Electrical switchboard with integrated control panel is included. Has a ....PLC control system. Bsdpfx Aeygvbvjgljlc

Year of construction: 2011, condition: used, Rated power: 5.5 kW Motor speed: 2930 rpm Max. operating pressure: 11 bar Dryer type: CT 8 Refrigerant: R134a Refrigerant charge: 0.260 kg Max. operating pressure (cooling system) HP 21 bar / LP 16 bar incl. Aquamat CF 3 oil-water separator Storage location: supplier Bodpfsxtnvkox Aglolc

Condition: used, Year of construction: 2006, Overview This bottle dryer was manufactured in 2006 by ACI and was integrated into a 30,000 bph PET bottling line to dry PET bottles before labelling. It is in full working condition, already dismantled, stored in a warehouse, and immediately available. Technical Details Capacity: 30,000 bph Formats: 1.5 L PET bottles Application: Drying before labelling Bodsw Rc Idepfx Aglolc

Condition: used, Year of construction: 2014, Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima) Bsdpfx Ajw N Nkpoglelc

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg Bjdpfsxrnn Dsx Aglolc

Condition: used, Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar. Bodpfx Agsygvcmoljlc

Year of construction: 2015, condition: excellent (used), Moretto XD20 (2015) 4,7 KW/6,3HP Bsdpfx Aox E Ur Ejglslc Dehumidifier XD20 Dryer OTX60VP

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Technical data: Max. compressed air pressure: 14 bar Ambient temperature, max.: 50°C Bedsydlycspfx Agljlc Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 82-15796, input voltage: 400 V, total length: 30,000 mm, total width: 4,000 mm, type of input current: three-phase, plate width: 2,100 mm, plate length: 1,600 mm, Equipment: documentation/manual, See description for all information Fully equipped SAM-X 2-colour machine including feeder, UV dryers, and stacker Year of manufacture: 2001 Bodpfxjygm Hpj Aglolc Full information and documentation can be found in the attachments.