Used Tylarc 303 for sale (456)

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Fpjdpfx Amez Rvi Ee Eep Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: good (used), Year of construction: 2017, operating hours: 9,257 h, functionality: fully functional, machine/vehicle number: 702403, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, This is a KUKA KR 30-3 industrial robot with a KRC4 controller, manufactured in 2017. We would also be happy to offer this robot as a fully refurbished unit! Fedpfx Amoz I Styo Ejpp The controller includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: used, Year of construction: 2017, operating hours: 11,021 h, functionality: fully functional, machine/vehicle number: 702404, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, This is a KUKA KR 30-3 industrial robot with a KRC4 controller, manufactured in 2017. Fpodpoz Smdkefx Am Eep We would also be happy to offer this robot as a fully refurbished unit! The controller includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: used, Year of construction: 1984, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Material data Material width: 350 mm Coil weight: 1 t Material thickness: 0.5–6 mm Coil inner diameter: 380–540 mm Coil outer diameter: 1,500 mm Reel Reel weight: 1.3 t Fjdpfx As Aaz T Tom Ejpp Reel dimensions Width: 1.7 m Depth: 1.5 m Height: 1.6 m EQUIPMENT Reel

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Seydelmann AE-130-3B automatic bowl chopper with infeed system for 200L mixing containers. Fjdezmih Ijpfx Am Ejpp Sold on behalf of a customer; functional machine, no warranty, no returns.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 3131151803, Offer 26255 Technical specifications: - max. working width 1350 mm - max. cutting capacity St 40 3 mm - cutting angle 2.30° - motorized back gauge 20 - 750 mm - sheet metal lifting, pneumatically assisted Fpsdpfs Af Igxjx Am Ejp - rear guard with light curtain - front angle stop + support arms - stroke rate depending on cutting length up to 42 strokes/min - pneumatic connection 6 bar - drive 400 V / 7.5 kW - table height approx. 850 mm - electric foot pedal - space requirement including back gauge and rear guard, without front support arms - approx. W 1950 x H 1250 x D 1950 mm - weight approx. 1800 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Fpjdpfxozcx Tmj Am Esp

Condition: like new (used), Year of construction: 2019, functionality: fully functional, PFAFF 8303i CE hot air seam sealing machine (Type 8303-243/001) PFAFF 8303-243/001 is an advanced, computer-controlled hot air seam sealing machine designed for sealing and taping seams in waterproof, water-resistant, and breathable materials (e.g., Sympatex, Gore-Tex). The version with the post at the rear (243/001) is primarily intended for footwear production and applications in the automotive industry (e.g., car seat components). Key advantages and features: Digital control (Touch Panel): A clear touch screen allows for quick programming of operating parameters, saving ready-made "recipes," and prevents unauthorized changes to settings with password protection. Independent roller drive: Separate control of the upper and lower transport rollers guarantees perfectly smooth material feed and eliminates seam wrinkling. Automatic tape cutting: The machine has an integrated tape cutter driven by a separate motor, which significantly increases efficiency and repeatability of the work cycle. Process stability: A patented two-chamber air nozzle ensures a perfect temperature profile along the entire length of the seam. Safety and ergonomics: A modern stand-up/sit-down workstation mounted on a stable table base with two control pedals. Technical specifications: Model / Type: PFAFF 8303 - 243/001 (2019 version) Maximum sealing temperature: up to 650 °C Operating speed: up to 7 m/min (standard, with an option to increase to 20 m/min) Heating power: 3600 W Width of tapes: 10 – 30 mm Diameter of transport rollers: 25 mm (designed for hard-to-reach areas in footwear) Power supply: 230 V (single-phase), 50/60 Hz Required air pressure: 6 bar (consumption approx. 150 liters/min) Main application: Sealing seams in trekking, sports, and military footwear. Production of interior car components (headrests, armrests, foam seat profiles). Specialized protective, work, and outdoor clothing. The machine is in perfect technical condition, like NEW! Price for the machine upon request. Transport to the customer is possible. Fsdpfxjz Rkc He Am Ejpp Please check our other auctions.

Condition: good (used), Year of construction: 2017, operating hours: 10,504 h, functionality: fully functional, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, This is a KUKA KR 30-3 industrial robot with a KRC4 controller, manufactured in 2017. We would also be happy to offer you this robot as a fully refurbished unit! The controller includes the following options: BoardPackage Fpjdpfx Amozw Da To Ejp Profinet ProfiSafe Device RemoteService RemoteSupportView

Condition: used, Year of construction: 2010, Mazak VTC820/30 3-Axis Machining Centre. S/No. 200131 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110, Removable Centre Partition. Country of Origin: United Kingdom Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please see individual lot for loading information and charges. Blocking and securing will be at the cost of the purchaser. Fjdpfxs Afnlas Am Ejpp

Condition: used, Year of construction: 2013, Trumpf Fibre TruLaser 3030 Flat Bed Laser Cutter (3kw/Low Hours/Trumpf Service) (2013) Fjdpfxs Ah Hduj Am Espp Location: These lots are located in Fareham, Hampshire, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser.

Condition: used, maximum load weight: 29,080 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, total length: 9,615 mm, total width: 2,550 mm, total height: 3,345 mm, Equipment: ABS, Wielton Strong Master NW-3 Steel Dump Body 32m³ HARDOX Chassis/Body: Super Light Chassis * Straight longitudinal beams * Weight-optimized S700 steel * Steel dump body, approx. 32 m³ * Front wall angled at 20° * Interior height: 1,640 mm * Floor: 4 mm Hardox HB 450 * Side walls: 3 mm Hardox HB 450 * Swinging tailgate * 2 tension locks at the bottom * Tension chain between the side walls * Work platform with access ladder on the left * Tarpaulin cover, 680 g/m² * Tare weight: 6,592 kg Suspension/Axles: SAF axles * 1st axle liftable * Disc brakes Fodpfx Aez Hgniom Eopp * Air suspension * Axle distance: 1,310 mm * Kingpin to 2nd axle: 5,560 mm * SAF front outriggers, full load * Steel rims * Tires: 385/65 R 22.5 * Spring pressure gauge * Fifth wheel height: approx. 1,150 mm Tipping Mechanism/Braking System: HYVA tipping cylinder * Automatic lowering during tipping, can be disabled * WABCO braking system * Folding underrun protection at the rear Equipment: Aspöck LED lighting * Toolbox * Water tank, 30 liters Color: Paint: RAL 9006 White Aluminum * Tarpaulin color: RAL 9006 White Aluminum Highlights: Only 6,592 kg tare weight * 32 m³ steel dump body * Floor and side walls made of Hardox HB 450 * Weight-optimized Super-Light chassis made of S700 steel * Lift axle * HYVA tipping cylinder We will be happy to provide you with further information.

Condition: used, LS 303 - glass scale with reading head Length: ML 920mm Fodszcq Nmepfx Am Ejpp HEIDENHAIN LS 303 ID 22897526 SN: 1769976F

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation Fpodpfx Amjzictpj Eep TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 43,000 h, For sale: TRUMPF L3030 laser cutting machine YEAR 2001 LIFTMASTER+ with loading and unloading shuttles 3000 WATT FORMAT 3000X1500 MAGNETIC TURBINE SIEMENS control Fsdpfszq R D Sox Am Eopp

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2025, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, The laser was fully functional and in very good technical condition until its professional dismantling. The machine was regularly serviced by an authorized service provider, and a complete service history is available. In 2025, all mirrors were completely replaced. The dismantling and professional disconnection of the machine were carried out by an authorized service provider. The machine is currently safely stored in a dry warehouse and is ready for shipment. Videos of the machine in operation are available. Fjdpfxjv Hxbbs Am Espp

Condition: good (used), machine/vehicle number: 55490081325398, Year of construction: 2025, operating hours: 329 h, load capacity: 3,000 kg, lifting height: 4,800 mm, fuel type: electric, mast type: other, overall weight: 4,280 kg, Unser ST 300-E 3 Tonnen Elektro-Stapler ist eine robuste und leistungsstarke Lösung für den Materialumschlag im Innen- und Außenbereich. Mit einer maximalen Traglast von 3.000 kg und einer Hubhöhe von 5,50 Metern bietet er die perfekte Kombination aus ... Fpodsz E Acmjpfx Am Eep Unser ST 300-E 3 Tonnen Elektro-Stapler ist eine robuste und leistungsstarke Lösung für den Materialumschlag im Innen- und Außenbereich. Mit einer maximalen Traglast von 3.000 kg und einer Hubhöhe von 5,50 Metern bietet er die perfekte Kombination aus ...

Year of construction: 2008, condition: used, Laser power: 4000W, power supply: 400V/50Hz, control voltage: 24V DC, required fuse rating: 3x160A, compressed air connection: 7-10bar, nitrogen connection (N₂): 30bar, oxygen connection (O₂): 20bar, connected load: 88kVA, operating hours: approx. 46,000h. An on-site inspection is possible. Fpsdpj Ah Tyqefx Am Eep

Condition: used, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2014, Year of construction: 2014, Internal vehicle number: G400237 Available immediately at our location in Kaufungen. For more information, please contact: Fpjdpfx As Abn Ndjm Eep * Luis Lucena * Viktoria Sologubova Langendorf SKA 24/30 3-Axle Tipper Semi-Trailer | 29,700 kg Payload Used Langendorf SKA 24/30 3-axle tipper semi-trailer, manufactured in 2014. This trailer combines a low unladen weight of 5,300 kg with a high payload of 29,700 kg and is ideal for transporting bulk goods. Technical specifications: * Manufacturer/Model: Langendorf SKA 24/30 * Vehicle type: Tipper semi-trailer * First registration: 02/2014 * Year of manufacture: 2014 * Axles: 3 * Permissible gross weight: 35,000 kg * Unladen weight: 5,300 kg * Payload: 29,700 kg * Technical inspection: New * Vehicle number: G400232 * Condition: Used * German vehicle Inspection possible by prior arrangement. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We would be happy to accept your used vehicle as part of the deal. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2002, Gathering machine / booklet making Theisen & Bonitz TB ECO A 308 FP + TB Sprint QSM 303 8 stations, manual feeder TB ECO 308 FP Performance: up to approx. 3,100 cycles per hour Maximum book block thickness: 50 mm Stack height per station: 50 mm (5 cm) Paper and format range Maximum sheet size: 310 × 430 mm Minimum sheet size: 105 × 148 mm (DIN A6) Paper weight: 20 to 1,000 g/m² TB B304 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Fsdpfx Ajzicw Ujm Eopp Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: good (used), Year of construction: 2019, functionality: fully functional, load capacity: 30,000 kg, total height: 650 mm, total length: 2,500 mm, total width: 1,600 mm, overall weight: 970 kg, table load: 30,000 kg, product height (max.): 500 mm, workpiece weight (max.): 30,000 kg, Equipment: foot remote control, Capacity: 30 Ton Workpiece diameter range: ø 235 mm min. / ø 5.517 mm max. Roll speed: 103–1.032 mm/min Complete with: - Driveunit LPP30-30-FM-WE - Idler unit LIP30-FM - Dual motor drive - Radio remote control Euroweld Fedpfsz H Nq Hox Am Eepp Country of origin: UK Motor power: 2,2 kW Machine (L×W×H): 250 x 160 x 65 cm Machine weight: 970 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension Equipment: -Ramp skids -Shovel rest Fodsx S Ri Topfx Am Eopp -Spare wheel Net price: €4,983.19 / Gross price: €5,930.00 Article number: IGX235301510.01 Technical data: • Brand: Ifor Williams • Model: GX105 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 303 x 157 x 30 cm • External dimensions (L x W x H): 502 x 209 x 162 cm • Loading height of the floor: 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 664 kg • Payload: 2,836 kg • Chassis: Low-loader (wheels next to the body) • Tires: 155/70R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced side panels with aluminum tread plate, walkable • Screen-printed wood floor, 24mm, non-slip and waterproof • Extremely stable welded lattice frame • Frame completely hot-dip galvanized • 2x individual ramps (skids), standing on a shaft, 120cm high • Very low chassis for a low approach angle • Excavator bucket rest at the front • Spare wheel, mounted under the excavator bucket rest • 6x lashing eyes mounted on the side in the side panel • 4x folding lashing eyes (plate anchors) mounted in the floor • Leaf spring axles from KNOTT, for absolute heavy-duty use • Reverse driving automatic • KNOTT overrun device and parking brake • Lockable coupling head • Very stable, screwed V-drawbar, REINFORCED • 13-pin plug • Plug connection removable from the front panel • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Heavy-duty support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to ask about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: used, Year of construction: 2011, machine/vehicle number: M318, Used Mesal Filling triblock 12000 BPH - year 2011Technical Specifications & Performance DataThis is an automatic isobaric filling monoblock engineered for PET bottle handling and optimized for carbonated beverage production. Manufactured by MESAL in 2011, model E30-30-10IA1, it combines rinsing, isobaric filling, and capping in a compact rotary platform suitable for medium-speed beverage production. As a versatile second hand asset for a used bottling line, it provides reliable industrial packaging performance with efficient changeover and robust construction.Manufacturer: MESALModel: E30-30-10IA1Year: 2011Production speed: up to 12,000 bottles/hour (format dependent)Container type: PETBottle format: 0.24L (240 ml)Neck finish: 28 mmFilling technology: Isobaric (for carbonated products)Operating mode: AutomaticElectrical data: 400 V, 60 HzPLC/HMI: Omron controlAdvanced Automation & Control SystemsThe monoblock integrates advanced automation to ensure repeatable filling accuracy and stable carbonation control. The Omron PLC coordinates the rinsing carousel, isobaric filling carousel, and capping turret with synchronized drives. Operator-friendly controls help streamline format changes and reduce setup time.Omron PLC automation for reliable machine coordinationCentralized control of rinse, fill, and cap turretsAutomatic operation with format-dependent parametersIsobaric process control for carbonated beverage handlingInterlocked guards and access doors for safe operationProduction Line Integration CapabilitiesDesigned for seamless integration in a beverage production environment, this monoblock is suitable for embedding into a complete used bottling line or operating as a core station within an industrial packaging system. It can be coupled upstream with depalletizing and air conveyors and downstream with labeling, inspection, packing, and palletizing equipment.Inline integration with conveyors and accumulation systemsCompatible with standard PET handling componentsFlexible for carbonated beverage applicationsOptimized for 0.24L PET; adaptable across similar small-format PETMachine Condition & Maintenance HistoryThis second hand monoblock is presented in ready-for-operation condition, suitable for beverage producers seeking dependable performance. The robust engineering typical of MESAL equipment supports consistent uptime when correctly maintained and commissioned.Ready for operation with standard commissioningIndustrial-grade construction for durabilitySuitable for inclusion in a used bottling line upgradeOperational Performance & VersatilityEngineered for carbonated beverage filling, the isobaric system maintains product CO2 content and fill-level stability. The PET handling components support 28 mm neck finishes, common in CSD applicatio... Fpodpfe Adt Nzsx Am Eep

Condition: ready for operation (used), Year of construction: 2013, controller manufacturer: SIEMENS, number of axes: 3, This TRUMPF TruLaser 3030 (L20) was manufactured in 2013. A robust CO2 laser cutting machine, it features a Siemens control system, a laser power of 3200W, and workpiece dimensions of 3000 x 1500 mm. With a travel speed of 140 m/min, it ensures efficient operation. Consider the opportunity to buy this TRUMPF TruLaser 3030 (L20) CO2 laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working hours / laser beam on 49000 h • Longitudinal travel x-axis: 3000 mm • Cross travel y-axis: 1500 mm • Height travel z-axis: 115 mm • Travel speed: 140 m/min Fpsdpfxszvu Ske Am Ejp • Workpiece dimensions: 3000 x 1500 mm • Laser power: 3200w • Type of laser: truflow Extra Information Machine still under power

Condition: used, maximum load weight: 29,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2014, next inspection (TÜV): 11/2028, Year of construction: 2014, Internal vehicle number: G400232 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Langendorf SKA 24/30 3-Axle Tipper Semi-Trailer | 29,700 kg Payload For sale: a used Langendorf SKA 24/30 3-axle tipper semi-trailer, manufactured in 2014. This semi-trailer offers a high payload of 29,700 kg with a low unladen weight of 5,300 kg and is ideally suited for the transport of bulk goods. Technical data: * Manufacturer/Model: Langendorf SKA 24/30 * Vehicle type: Tipper semi-trailer * First registration: 02/2014 * Year of manufacture: 2014 * Axles: 3 * Permissible total weight: 35,000 kg * Unladen weight: 5,300 kg * Payload: 29,700 kg * Technical Inspection (TÜV): New * Vehicle number: G400232 * Condition: Used * German vehicle Inspection possible by prior arrangement. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change. We also accept your used vehicle as part of the payment. Fpjdpfx Ajzthrrsm Esp Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.