Used Uv Printers for sale (1,982)

Year of construction: 2017, condition: ready for operation (used), Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible. Iodex H S N Rspfx Abrohu

Year of construction: 2020, condition: ready for operation (used), A maintenance-requiring Dremel 3D plastic printer is available. Filament diameter: 1.75mm, materials: PLA/ECO-ABS/PETG/Nylon, build dimensions X/Y/Z: 255mm/155mm/170mm, min. layer thickness: 0.05mm, max. extruder temperature: 280°C, device dimensions X/Y/Z: approx. 550mm/400mm/400mm, weight: approx. 20kg. On-site inspection is possible. Iodeycwtxopfx Abrehu

Year of construction: 2010, condition: ready for operation (used), Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment. Ijdpfxjxzt Dpj Abrjhu

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Ihjdpfx Aju Afz Rjbrsu

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Iodpfxsxz Ewno Abrshu

Condition: ready for operation (used), Year of construction: 2018, A digital UV flatbed printer Fuji is available. Rigid material: max. dimensions X/Y: 1250mm/2500mm, max. material thickness: 50.8mm, max. printing dimensions X/Y: 1260mm/2510mm, max. material density: 34kg/m². Roll material: max. printing width: 2190mm, roll width range: 900mm-2200mm, max. roll weight: 50kg. Ink type: KN series/KV series, channels: 5, colors: CMYK/white. Droplet size range: 6pl-42pl, min. print resolution: 1200dpi, print modes: 6, max. printing speed standard/roll: 22.8m²/18.9m²/h. Machine dimensions X/Y/Z: approx. 4100mm/2000mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. The machine is ready for shipment and cannot be demonstrated. Ihsdjxnz U Nepfx Abrju

Condition: ready for operation (used), Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Ihsdpju N Hdysfx Abrju

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Ihsdpjxmkctsfx Abrou

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Ihodpfx Aboww Ivnjrsu

Condition: ready for operation (used), Year of construction: 2012, A Durst textile printer including Klieverik calender is available. 1) Large format textile printing machine Durst Rhotex 320 for sublimation prints, year of construction: 2012, print type: inkjet, max. print width: 3200mm, max. media thickness: 2mm, resolution: 600dpi, print speed: 65m²/h, colors: CMYK. Machine dimensions X/Y/Z: approx. 6800mm/1700mm/2000mm, weight: approx. 4500kg, printed area: approx. 385000m². Including dye sublimation and workstation. Two print heads must be replaced. 2) Transfer calender Klieverik GTC81-3400, year of construction: 2009, working width: 3200mm, roller diameter: 195mm, max. temperature: 220°C, speed: 2m/min, machine dimensions X/Y/Z: approx. 4400mm/1100mm/1500mm. Including low-voltage winder, year of construction: 2019, documentation available. On-site inspection is possible. Only package sale possible. Ihodpfx Absv Tct Isrou

Condition: used, functionality: fully functional, machine/vehicle number: SG76G34001, Year of construction: 2017, operating hours: 11,062 h, Trindo Digitalmanufaktur GmbH is offering a well-coordinated production system from the HP Multi Jet Fusion series for sale. The system is designed for industrial multi-shift operation and has been consistently maintained. System Components: • 1x HP Jet Fusion 4200 Printer (M0E85A) • 1x HP Jet Fusion Processing Station (M0E89A) with fast cooling function • 3x HP Jet Fusion Build Units (M0E92A) for maximized throughput Service & Maintenance Status: Active 3daas Contract: The machine is currently under an active HP Service Agreement (3D-as-a-Service). Ihodpfx Aoyiz Nqebrou Advantage for Buyer: Since the system has been continuously maintained by HP, the normally costly and time-consuming manufacturer recertification upon transfer or relocation is not required. Condition: Fully operational. All wear parts have been regularly replaced by certified technicians as part of the service agreement. Production Capacity: Thanks to the inclusion of three build units, the system is optimized for high-throughput operation. This allows for simultaneous workflows: • Printing process (Build Unit 1) • Cooling phase/unpacking in the processing station (Build Unit 2) • Cleaning and refilling/setup (Build Unit 3) Handover Terms: Location: Munich (Trindo Digitalmanufaktur GmbH) Documentation: Maintenance records and operating hours can be viewed upon legitimate interest. Inspection: An on-site demonstration of the system during operation is possible by appointment.

Condition: ready for operation (used), Max. power: 4000W, max. compressed air supply: 6ar, with Conveying System APS/ALS and Chiller Hyfra LWK 31/1-S. Isdpfoixqkzjx Abrehu

Year of construction: 2012, condition: ready for operation (used), There are three Concept Laser M1 3D printers available, year of construction machine 1/ 2/ 3: 2009/ 2010/ 2012, operational hours counter machine 1/ 2/ 3: 82,046/ 93,781/ 68,167h, with Laser Rofin StarFiber 200, water cooling, screening machine and documentation, at machine 1 the laser is broken and the machine is without optics, machine 2 is fully functional, machine 3 is fully functional, but a machine software error occurs regularly, which has to be fixed, afterwards production can always be continued, an inspection is possible, Isdenr Nr Hepfx Abrohu

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Ihjdpfxshlp Efs Abrsu

Condition: excellent (used), / Iodpfxoud Ilrj Abrjhu / / /

Condition: excellent (used), Offer for flexo printing machine W&H SOLOFLEX, 8 colors, year 1998, 620 mm width, can be seen in operation in excellent condition Ihodpfx Asygg Uyjbreu

Year of construction: 2011, condition: used, Operational unit. Ihjdpfx Ajyh Ha Nsbrju Recently taken from the production!

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Ihjdpsxu I R Dofx Abrou Software/slicing program: EVO-lizer

Condition: used, DIGI SM-5000 BS Checkout Scale | With Receipt Printer & Large Display | Excellent Condition For sale: Professional Retail Scale – DIGI SM-5500BS Ideal for butcher shops, cheese specialists, fresh food stores, markets, and other food retail applications. 🔧 Specifications: Brand: Digi Model: SM-5500BS Max Weighing Capacity: 6 / 15 kg Iedpfx Ajv Tcv Aobrjhu Minimum Weighing: 40 grams Accuracy: per 2 / 5 grams Features: Built-in receipt printer Large, clear customer display Functional keypad Dimensions (WxDxH): 38 x 42.5 x 60 cm Power supply: 230V – Plug-and-play 🟢 Condition: Well-maintained used condition Fully operational Ready for immediate use Freely programmable 📦 Price on request / excl. VAT and transport 📍 Location: Meppel 📞 More info or viewing: Caspar Hermeler

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Ijdsibikwspfx Abrjhu Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Iodoqwkypepfx Abrehu

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Isdpfox Tud Rex Abrohu

Condition: not inspected (used), functionality: unexamined, Year of construction: 2020, total length: 900 mm, total height: 1,900 mm, total width: 1,200 mm, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input current: 13 A, temperature: 420 °C, ambient temperature (min.): 20 °C, ambient temperature (max.): 40 °C, positioning accuracy: 0.02 mm, electrical fuse: 16 A, table width: 500 mm, table length: 400 mm, noise level: 62 dB, For sale is an EVO-Tech EL-102 – an industrial FFF/FDM 3D printer (filament) designed for reliable operation in prototyping, as well as single part and small batch production. The system is engineered for reproducible printing conditions and is equipped with features such as integrated material drying and a heated build chamber, ensuring process-stable results – especially when processing technical thermoplastics. - Print size: 500 × 400 × 510 mm - Build volume: 102 liters - Weight: 400 kg - Noise level: 62 dB - Positioning accuracy: 0.02 mm - Layer thickness: 0.10–0.75 mm - Nozzle diameter: 0.2 – 0.8 mm - Number of extruders: 2 (independently on one axis) - Print bed temperature: 200°C Iedpfx Aoyh Ratebrehu - Build chamber temperature: 100°C - Nozzle temperature: 420°C - Ventilation: Exhaust via activated carbon filter - Minimum wall thickness: 0.3 mm - Power consumption: 240–4500 W - Spool size: up to 10 kg - Vacuum clamping table - Integrated material drying for consistent material quality throughout the process The system has been unused in the facility for one year and is therefore being sold as untested.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 82-15796, input voltage: 400 V, total length: 30,000 mm, total width: 4,000 mm, type of input current: three-phase, plate width: 2,100 mm, plate length: 1,600 mm, Equipment: documentation/manual, See description for all information Iedpfsygm Hpex Abrshu Fully equipped SAM-X 2-colour machine including feeder, UV dryers, and stacker Year of manufacture: 2001 Full information and documentation can be found in the attachments.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 031223510029, Year of construction: 2024, operating hours: 573 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, type of input current: AC, overall weight: 145 kg, input voltage: 230 V, input current: 8 A, For sale: A virtually unused SINTERIT Lisa X SLS 3D printer, operated for only 573 hours. The set includes: Ihedpfx Abjwi Siverou - Sinterit LISA X 3D Printer - Sinterit Studio Advanced ("slicer") - Flight Case for LISA X Technical Advantages: Exceptionally fast printing, with speeds of 10-14 mm/h, allowing a full bed with complex shapes to be printed in just 34 hours. Larger build volume with a bed size of 180 x 130 x 330 mm. Wide range of materials, from highly durable and flexible options to specialized materials like ESD powder. High print quality with fine details. Open environment with over 50 adjustable printing parameters, enabling flexible management and the use of external materials. We Offer: Option for personal handover in the Czech Republic or professional shipping internationally. 14-day money-back guarantee and the possibility of a test print. 500 EUR discount for quick closure within 7 days. Contact us for more details or to arrange a viewing!