Used Vacomat 2000 for sale (7,565)

Condition: used, Autotherm ATK 2000 cooling system, 20.5 kW cooling system in a 20-foot container Technical data - Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) - Nominal power: 20.5 (31.5) kW - Nominal current: 50 (71) A - Supply line fuse: 80 A Mechanical data - Dimensions: (W x L x H) 2430 x 6800 x 4350 mm - Weight: 4800 kg - Supply: Flange SDIN2633 DIN100 PN16 - Return: Flange SDIN2633 DIN100 PN16 - Overflow / Drain: 2" internal thread - Well water inlet: 2" internal thread - Well water outlet: 2" internal thread - Adiabatic inlet: 3/4" internal thread - Filling: manual 3/4" internal thread Water circuit - Heat transfer fluid: Water/glycol (90 % / 10 %) - Flow pressure: max. 10.6 bar - Tank volume: 4000 liters Free cooling circuit - Pump type: Grundfos CR 45-1-1 AFAE-EUUE - Delivery pressure: ... 2.15 bar - Flow rate: 58 m³/h Consumer circuit Dkjdpfjuzhcuex Ak Ajw - Pump type: (Pressure boosting system) Grundfos Hydro 2000 ME 2 CRE 32-6 AFAE-EUUE - Delivery pressure: max. 10.6 bar - Flow rate: max. 40 m³/h 20-foot container AIS-DSC-22-28 External dimensions mm (L x W x H): 6,058 x 2,438 x 2,591 Internal dimensions mm (L x W x H): 5,898 x 2,352 x 2,390 Usable area inside m²: 13.88 Compact control Compact Control 2000 ME. Compact microprocessor control for stepless and cascade control of pumps with MGE motors and integrated frequency inverter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic switching on and off of the individual speed-controlled pumps via a digital controller specially developed for centrifugal pumps. Grundfos R100 infrared handheld device and diagnostic unit: for commissioning, data monitoring, reading error messages and configuring Grundfos pumps. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, table length 2000 mm table width 1000 mm table height 920 - 1000 mm weight of the machine ca. 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Dodovn Uycspfx Ak Ajkw Ribbed bottom for reinforcement. including floor storage Accessories optional!! Accessories shown are optional!!

Year of construction: 2019, condition: used, Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands) We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands. This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use. With 1/2 Gastro tooling; 325 x 265 (2x) ----- Key Features - High-capacity automatic traysealer for MAP and vacuum packaging - Equipped with integrated Busch vacuum pump (160 m³/h) - Dual mould system – seal two trays simultaneously for high throughput - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.) - Quick and easy mould change system - Transparent cover for excellent accessibility and cleaning - Flexible operation with programmable tray formats - Designed for continuous industrial production ----- Technical Specifications - Machine dimensions: 4750 x 1180 x 1550 mm - Vacuum pump: 160 m³/h Busch - Cycle time: 10–15 seconds - Power supply: 400V / 3-phase / 50 Hz - Power consumption: ±10 kW - Air requirement: 6 bar (max. 400 l/min) - Weight: ±1100 kg - Max tray size: 2 × 350 x 260 mm - Max tray depth: up to 120 mm ----- Why This Machine? The TPS 2000 is built for efficient, high-volume packaging with maximum flexibility. Thanks to its dual mould system, it can double production capacity or run different tray formats simultaneously. ----- Dodpfoy Nagiex Ak Aekw Availability - Location: Emmeloord, The Netherlands - Status: In stock – immediately available - Condition: Very neat, directly from production ----- Interested? For pricing, additional photos, or a video of the machine in operation, feel free to contact us. More photos and full specifications: /

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control SIEMENS - 840 D Djdezaf Hnepfx Ak Aekw turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm Dodsxm Sagjpfx Ak Askw -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: as good as new (ex-display), Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article Dedpfxeyyqnfo Ak Aokw infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: like new (used), Year of construction: 2006, 2000 kg load capacity Dsdpfx Ajhwv R Djk Aokw Rotating device, self-supporting, with brake for jig and tool construction for assembly, welding, painting, etc. with foot-operated remote control can be switched between right and left with clamping bracket for raising by approx. 1000 mm Machine is in technically new condition, almost unused Dimensions: Height to center of axle 850 mm More machines of this type in various sizes are in stock. Load capacity from 500 kg to 5000 kg.

Condition: used, Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Handover in its current condition as inspected -Flatness: see photos (straightedge not included) -Mounting plate: with support ribs and heating device -Length: 2000 mm -Width: 1510 mm -Sheet thickness: 60 mm -Plate: with supporting ribs Dodpeikn Rvsfx Ak Ajkw -Transport dimensions: 2000/1510/H880 mm -Weight: 1640 kg

Condition: good (used), Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Dsdpsy Eg T Uefx Ak Askw Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating system – Programming of manual and automatic anuba inserting – Inserting of single, anuba – Step by step execution Installed electrical power 7,62 Kw Compressed air 6-7 atm Machine Overall dimensions m 4400 x 1600 x 1600 h Weight kg 1650 Electrical cabinet overall dimensions mm 1050 x 550 x 1100 h Weight kg 390

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision Dsdpfx Akoyrty Ho Ajkw shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: used, Year of construction: 2015, operating hours: 9,319 h, lifting height: 4,900 mm, fuel type: electric, mast type: triplex, battery manufacturer: Emrol, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,600 mm, Year of manufacture: 2015 Empty weight: 3.600 kg Lifting capacity: 2.000 kg Maximum passing height: 212 cm Number of valves: 3 General condition: average Technical condition: average Visual appearance: average Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = Dsdpfsz I Akpsx Ak Aekw - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 EPA Marked: yes Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: like new (used), Year of construction: 2015, functionality: fully functional, pressure: 0.5 bar, temperature: 110 °C, For sale is a steam boiler manufactured by BOSCH - LOOS, model U-ND 2000. Year of manufacture: 09/2015 Capacity: 750 - 1,500 kg/h. Working pressure: 0.5 bar. Steam temperature: 110°C. Riello gas burner. Complete service documentation. Condition: IDEAL, like NEW. Dkjdpfs Afpfnex Ak Aow Complete documentation for registration with the UDT (Office of Technical Inspection). Start-up guarantee.

Condition: used, mileage: 127,000 km, power: 184 kW (250.17 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,680 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, Year of manufacture: 2019 Year of construction: 2019 Front axle: Steering; Tyre profile left: 25%; Tyre profile right: 25% Rear axle: Double wheels; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Empty weight: 7.387 kg Carrying capacity: 4.603 kg GVW: 11.990 kg Dkedpszy Hi Njfx Ak Aew Tail lift: DHollandia, 2000 kg Registration number: BB-415-V = Additional options and accessories = - Camera system - Outside temperature display - Rear air suspension - Roof spoiler

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Z-axis: 2,290 mm, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This Cetos BHU 50 A x 2000 features a swing diameter of 500 mm and a center distance of 2000 mm. It has a maximum grinding wheel width of 200 mm and can accommodate workpieces weighing up to 300 kg. If you are looking to get high-quality grinding capabilities, consider the Cetos BHU 50 A x 2000 machine we have for sale. Contact us for further details. Dkedpfx Asz E Nfhek Aew - Z-Axis Travel (Longitudinal Travel): 2290 mm- X-Axis Travel (Cross Movement): > 600 mm (tested, capable of more)- Hydraulic Rapid Stroke (X-Axis): 120 mm- Max. Grinding Diameter: Minimum 500 mm- Grinding Wheel Diameter (New): 500 mm- Swing Diameter: 500 mm- Center Distance: 2000 mm- Grinding Wheel Dimensions (Diameter x Width x Bore): 500 x 80 x 203 mm- Grinding Wheel Diameter After Partial Wear: 380 mm- Minimum Ground Swing Diameter with Worn Wheel (380 mm): 70 mm- Maximum Grinding Wheel Width: 200 mm- Maximum Width of Multi-Piece Wheel Set: 200 mm- Maximum Sum of Individual Wheel Widths in Multi-Piece Set: 200 mm- Swing Diameter in Open Steady Rest: 110 mm- Swing Diameter in Closed Steady Rest: 110 mm- Taper in Workhead Spindle: MORSE 5- Taper in Tailstock Sleeve: MORSE 5- Clamping Chuck Diameter: 200 mm- Bore in Sleeve for Internal Grinding Spindle: 100 mm- Workhead Swivel Angle: +95° / -5°- Wheelhead Swivel Angle: ±45°- Upper Table Swivel Angle at 2000 mm Center Distance: +5° / -3°- Machine Weight with Standard Accessories (at 2000 mm Center Distance): 6700 kg- Workhead Spindle Speeds (Infinitely Variable): 18–112 min⁻¹ / 90–560 min⁻¹ (1st Row / 2nd Row)- Smallest Table Longitudinal Travel: 1 mm- Largest Table Longitudinal Travel (at 2000 mm Center Distance): 2290 mm- Cross Movement of Wheelhead: 415 mm- Hydraulic Rapid Traverse of Wheelhead: 60 mm- Table Speed (Infinitely Variable): 0.05–4 m/min- Cross Movement of Wheelhead per Automatic Infeed: 0.2 mm/ø- Cross Movement of Wheelhead per Automatic Infeed for Fine Grinding: 0.15 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Plunge Grinding: 0.0005–0.01 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Traverse Grinding: 0.005–0.05 mm/ø- Speed of Automatic Wheelhead Infeed During Plunge Grinding: 1 ⁻¹- Infeed Speed for Spark-Out Infeed: 0.015 ⁻¹- Total Power Requirement of Electric Motors: 16 kVA- Wheelhead Motor Power: 9.5 kW- Maximum Workpiece Weight Admitted Between Centers: 300 kg- Maximum Overhanging Workpiece Weight (Including Clamping Device): 60 kg- Table Infeed Advance: 6 m.min⁻¹

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Demmeler Ergonomix M-2000 with original set of 2 perforated plates, 2.4 m x 1.2 m, plus octagonal 3D table top, 1.1 m, with 28 mm holes Plasma nitrided Almost unused, like new, in top condition Complete with accessories and technical documentation Thanks to the sophisticated arrangement of the entire mechanism, Demmeler’s developers have succeeded in creating an unbeatable large working area while maintaining a small footprint for the Demmeler Ergonomix® M manipulator. The manipulator always positions the heaviest loads in the ideal location. A special feature of the Demmeler Ergonomix® M product family is the large swivel range up to 180°. This provides a decisive advantage for many workpieces, allowing them to be completely machined in a single setup without additional rotation. Load capacity 2000 Model M2000 Dodpfx Akez Hvy Us Ajkw A = min 490 B = max 970 C = max 1480 D = max 1000 Torque 1250 Tilt angle 180° Tilt moment 8000

Condition: ready for operation (used), Year of construction: 2002, clamping force: 2,000 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2002. This Arburg Allrounder 570 C 2000-675 features a clamping force of 2,000 kN and a maximum mold height of 950 mm. It includes a screw diameter of 50 mm and a maximum injection volume of 353 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 570 C 2000-675 machine we have for sale. Contact us for further details. • Space between columns: 570 x 570 mm • Maximum mold height: 950 mm • Minimum mold height: 300 mm • Maximum injection volume: 353 cm³ • Maximum injection pressure: 2,080 bar • Centering ring: 125 mm • Hot runners in the machine: 9 • Core pullers: 1 Dkedez D T Dlepfx Ak Ajw • Pneumatic valves: 1 Additional equipment • Wittmann W821 robot (year 2018)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, FOR SALE – Complete VECTOR Model 2000 EUR / EPAL Pallet Production Line (800 × 1200 mm) We are offering for sale a complete VECTOR Model 2000 production line for manufacturing EUR / EPAL pallets (800 × 1200 mm). The line has been in continuous operation since 2018 and has been regularly serviced and maintained, ensuring it is in excellent working condition. To date, it has produced 2,693,462 pallets. Technical Specifications: * Manufacturer: VECTOR * Model: 2000 * Pallet type: EUR / EPAL * Pallet dimensions: 800 × 1200 mm * Production capacity: Up to 300 pallets/hour * Certification: CE * Year of commissioning: 2018 The production line is currently in operation and can be inspected while running at our facility. Detailed technical specifications are available upon request. ===== Complete Vector Model 2000 line for the production of EUR / EPAL pallets 800x1200 for sale. The line has been in continuous operation since 2018, is regularly serviced and maintained in perfect working order. To date, it has produced 2,693,462 pallets. Specifications: Dkjdpfx Aj Abbikok Asw Manufacturer: VECTOR Model: 2000 Production of EUR / EPAL pallets Pallet format: 800 x 1200 mm Capacity: up to 300 pallets / h CE certificate Year of commissioning: 2018 The line is in continuous operation – it is possible to view the machine while it is running at our facility. Detailed technical data is available for interested parties. We invite you to contact us and visit us in Andrychów.

Condition: ready for operation (used), Philips PE 1927/71 power supply, 4022 229 2000 1 D 003868 ACD 9415, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dksdpfx Ajz Hicvok Aow

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm Dodpferbm T Dsx Ak Aokw -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Condition: used, Beck Wall 1000/2000 Extraction Wall Extraction Wall Type: Beck Wall 1000/2000 Extraction wall made of steel sheet, with 5 evenly distributed suction slots made of perforated sheet metal. For connection to a central extraction system via a suction nozzle located in the center at the top of the extraction wall. Cleaning opening, which can be unscrewed, located at the bottom on the front of the wall. Possible applications: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mixes or other stationary dust-generating processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: DN 250, located in the center at the top Recommended extraction capacity: 3000 m3/h Paint finish: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: €2970,- Dedpfsk Shuhsx Ak Askw You can find more new and used items in our shop! International shipping costs on request!

Condition: used, This listing is for a Applied Biosystems API 2000 MDS SCIEX LC/MS/MS This system was previosly paired with the Shimadzu SIL-HIT HPLC system. It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Dodpoxzhpmofx Ak Aokw Equipment can be serviced/renovated/refurbished on request at extra cost.

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t Djdpsv Rdzbofx Ak Aekw CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories *

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) Dkedpfxew S E R Ro Ak Aew • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset • Spindle speed: 12 . . . 2,500 rpm • Spindle bore: 54 mm • X-axis: 210 mm • Z-axis: 1,181 mm • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW • Weight: approx. 2,700 kg

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 2,000 kg, Protec KT, load capacity 2000 kg Capacity horizontal: 2000 kg Capacity tilted: 2000 kg Dkedswtrpkepfx Ak Asw Stepless speed adjustment from 0.05 to 0.5 rpm (conversion on request at extra cost) With dual foot remote control With hand remote control with digital display 380V Clamping plate diameter: 1300 mm Height (horizontal): 1250 mm Height (tilted to center): 1080 mm Length: 1600 mm

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment Excellent condition Height min: 1050 mm Height max: 2200 mm Total height: 3250 mm Rotational speed: 0.2 - 1.0 rpm Torque: 24,000 Nm Lifting speed: 1.5 m/min Dksdpjytgu Tsfx Ak Aew Handheld remote control