Used Vibration Techink for sale (2,266)

Condition: excellent (used), Vibratory feeder with linear feeder and sound insulation by California Vibratory Feeders. 110 Volt, 50 / 60 Hz, 2.5 Amp. Was only used for a trial. Equipped with an integrated light barrier on the linear guide rail for switching off the vibratory bowl and an air nozzle for part separation. Ljdpjxrb S Nsfx Ahaoah

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25-1361, total length: 775 mm, total width: 550 mm, total height: 775 mm, overall weight: 100 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 0.34 kW (0.46 HP), power: 0.35 kW (0.48 HP), workpiece length (max.): 525 mm, Equipment: CE marking, documentation/manual, emergency stop, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. (Italian OLI Brand – 0,34 kW) * Changeable valve for the wastewater decharging Lodpfxowb Hhds Ahaeah * Control panel(EU Standarts) included * Main swicth and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: good (used), Vibrating conveyor / feeder with a length of 9 meters and a width of 0.8 meters Lasdpfswzwnhsx Ahajh

Condition: used, Year of construction: 2020, total length: 3,920 mm, - Arbeitshöhe max. 14,30m - Plattformhöhe max. 12,30m - Plattformhöhe – eingefahren 1,65m - Plattformlänge – außen 2,79m - Plattformlänge – außen, ausgeschoben 4,32m - Plattformausschub – Länge 1,52m - Plattformbreite – außen 1,60m Lasdpsxpx Uvsfx Ahaoh - Höhe der Fußleiste 15 cm - Max. Personen auf der Plattform (innen/außen) 3/2 - Tragfähigkeit 363 kg - Tragfähigkeit – mit ausgefahrenem Plattformausschub 136 kg - Verfahrbar in voller Plattformhöhe 12,3m - Fahrgeschwindigkeit – eingefahren 7,2 km/h - Fahrgeschwindigkeit – ausgefahren 0,5 km/h - Steigfähigkeit – eingefahren 35% - Wenderadius – innen/außen 2,11m/ 4,6m - Hub-/Senkzeit 61/43 sec - Neigungs-Sensoraktivierung (Längsachse/Querachse) 3° / 2° - Nivellierung mit max. Abstützungen Längsachse/Querachse) 5,3° / 11,7° - Reifenkontaktdruck 641 kPa - Bodenlast 10,56 kPa - Schall- & Vibrationspegel - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s²

Condition: new, Year of construction: 2026, Machine type: EVT 130 Manufacturer: ERBA Power kW: 1.1 Total capacity: 130 l Description: The EVT 130 long trough vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Discharge or separation is performed via a bottom discharge (manual/pneumatic). The working tank can be subdivided into compartments with the use of partition plates, allowing for individual processing of parts. The machine features an electrical control cabinet and can optionally be equipped with a fully automatic PLC process control system. On request, reinforced suspension and a more powerful motor can be installed to accommodate higher loads. The motor speed can be infinitely adjusted via a frequency inverter (optional). As an experienced partner, we offer you expertise in all aspects of vibratory finishing. We work with you to develop efficient solutions for your optimal process results. The stated price is net, plus the currently applicable statutory VAT and plus freight costs. The images may show the machine with accessories, which are optionally available and subject to additional charges. The stated price refers to the basic machine. The pictures are sample photos; actual appearance and dimensions may differ from the images. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). Laodpfx Aheyq Ra Ieaoh This offer solely serves to present our goods. Contract negotiations are concluded via telecommunication (email, telephone, message portal). Initially, we send you a non-binding offer, along with information on our general terms and conditions including legal notice and right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine Type: EVT 80 Manufacturer: ERBA Lasdpsyq Rblefx Ahajh Power kW: 0.75 Total volume: 80 L Description: The EVT 80 long-tank vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Emptying and separation are carried out via bottom discharge (manual/pneumatic). Removable dividers allow the process tank to be partitioned into compartments for individual processing of parts. The machine is fitted with an electrical control cabinet and can be optionally equipped with a fully automatic PLC process control system. For higher loads, reinforced suspension and a strengthened motor can be installed upon request. The motor speed can be continuously adjusted by means of a frequency inverter (optional). As an experienced partner, we provide expert knowledge in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The price indicated is net, plus the applicable statutory VAT and shipping costs. Accessories shown in the images may be optional and subject to an additional charge. The price quoted refers to the basic machine. The photos are sample images—the actual appearance and size may differ from those pictured. If you are interested, we look forward to your inquiry. We will be happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR). This listing is for presentation purposes only. The contract negotiation is conducted via telecommunication (email, phone, messaging platform). In the first step, we will send you a non-binding offer, along with our general terms and conditions, legal notice, and revocation instructions before any sale or contract conclusion takes place.

Condition: new, Year of construction: 2026, Machine type: Turbo 20 Manufacturer: ERBA Ledpfx Asyq Rciohaoah Power kW: 1.1 Total volume: 20 L Description: The ERBA Turbo 20 is a centrifugal finishing system designed for deburring, smoothing, and polishing small to medium-sized workpieces with short process times. The machine is equipped with a digital process timer and a digital speed display. The disc speed can be adjusted via a frequency inverter. The Turbo 20 is available in both dry and wet versions. It can be integrated into a production line with a separation section. As an experienced partner, we provide comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. The listed price is net, plus the currently applicable VAT and freight costs. The images may include accessories that are optionally available and subject to an additional charge. The stated price refers to the base machine. Photos are for reference only; actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, imprint, and the right of withdrawal before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 350 vibratory finishing machine features a rising work chamber floor with integrated separation system. It is equipped with an easily replaceable screening unit and delivers high operational efficiency thanks to its integrated drop step. Discharge and separation are managed via the built-in hatch (manual/pneumatic operation). On request, a reinforced suspension and a more powerful motor can be installed for higher load requirements. The motor speed can be infinitely adjusted via frequency converter (optional). Side discharge allows the EVP-RA 350 to be linked with other machines. The unit can be optionally equipped with fully automated PLC control. ERBA vibratory finishing systems are characterized by their robustness and long service life, largely attributed to the hot-cast polyurethane lining of the work chamber. Technical Data: - Gross volume: 385 L - Working channel width: 340 mm - Unbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal drum diameter: 1,200 mm As an experienced partner, we offer expertise in vibratory finishing processes and cooperate with you to develop efficient solutions for optimal processing results. All prices are net plus the current statutory VAT and shipping costs. Images may show the machine with optional accessories, which are available separately and may incur additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with expert and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). Lasdpfxjyq Rc Ao Ahaeh This listing is intended solely as an online presentation of our product. Contracts are negotiated via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions, imprint, and information on your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: Turbo 8 Manufacturer: ERBA Ljdsyq Rdmepfx Ahaeah Power kW: 0.37 Total volume: 8 l Description: The ERBA Turbo 8 is an entry-level centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces in a short process time. The machine is equipped with a digital process timer and a digital speed display. The disc speed can be adjusted via a frequency converter. The Turbo 8 is available in both dry and wet versions. As your experienced partner, we provide comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. The stated price is net, plus applicable statutory VAT and freight costs. The system may be shown in the pictures with accessories that are optionally available and subject to additional costs. The stated price refers to the base machine only. The photos serve as examples. The actual appearance and dimensions may differ from those shown. If you are interested, please feel free to contact us. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contractual negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, providing you with our general terms and conditions (including company imprint) and revocation policy before a purchase or contract is concluded.

Condition: new, Year of construction: 2026, Machine type: ESA 15 Manufacturer: ERBA Power (kW): 3.37 Sludge basket volume: 15 L Description: The ERBA ESA 15 circulation centrifuge (Patent No.: 201606464) is a professional stand-alone unit for the treatment of process water for vibratory finishing systems. It features a wastewater tank with agitator as well as a clean water tank and is capable of producing up to 600 L of fresh water per hour. Contaminant particles are separated from the process water using centrifugal force of 1500 g and removed as solid cake. The machine is easy to operate thanks to the programmable logic controller (PLC) with touchscreen interface. The ESA 15 also stands out for its compact design, making it extremely space-saving. As an experienced partner, we provide you with expertise in all areas relating to vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The stated price is net, excluding the currently applicable statutory VAT and shipping costs. Ledoyq Rd Tspfx Ahaeah Some images may show the system including optional accessories, which are available separately and may incur additional charges. The listed price refers to the base machine only. If you are interested, please do not hesitate to contact us. We will be happy to advise you, without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is for online presentation purposes only. Contract negotiations take place via telecommunication (email, phone, messaging platform). In the first instance, we will provide you with a non-binding offer, along with our general terms and conditions (including legal notice) and information about your right of withdrawal, prior to the conclusion of any purchase or contract.

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a rising process channel floor with integrated separation facility. It is equipped with an easily interchangeable screening unit and stands out for its high operational efficiency, thanks to the integrated drop step. Emptying or separation is performed via the integrated flap (manual/pneumatic). For higher load requirements, reinforced suspension and a heavy-duty motor can be fitted upon request. The motor speed can be steplessly adjusted using a frequency inverter (optional). Owing to its side discharge, the EVP-RA 550 can be linked with other machines to form a processing line. The system can also be supplied with a fully automated PLC control unit (optional). ERBA vibratory finishing systems are renowned for their durability and long service life, which is largely due to the hot cast polyurethane lining of the process chamber. Technical specifications: - Gross volume: 550 liters - Channel width: 390 mm - Imbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal drum diameter: 1,400 mm As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together, we develop efficient solutions to achieve optimal process results for your application. Prices are net, excluding the currently applicable statutory VAT and shipping costs. Equipment shown in the images may include optional accessories that are available separately and subject to additional charges. If you are interested, please do not hesitate to contact us. We are happy to offer you free and non-binding consultation. Ledpfx Aheyq Rgusajah The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. The contract negotiation takes place via telecommunication (e-mail, phone, messaging portal). As a first step, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice, and information on the right of withdrawal prior to any purchase or contract conclusion.

Condition: new, Year of construction: 2026, Machine type: EVP 30 Manufacturer: ERBA Power kW: 0.95 Total volume: 30 liters Description: The EVP 30 vibratory finishing machine from ERBA is ideal for processing small workpieces or as an entry-level or pilot system. It features a flat work container base without a separation unit. Discharge or separation is carried out via the bottom discharge (manual or pneumatic). The motor speed can be continuously adjusted using a frequency converter (optional). The system can also be equipped with a fully automated PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and longevity, which is also ensured by the heat-cast polyurethane lining of the work bowl. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available at additional cost. If you are interested, we look forward to your inquiry. We are happy to provide you with independent and non-binding advice. Ljdpfoyq Ripex Ahasah The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place by means of telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which also includes our general terms and conditions with legal notice and information on the right of withdrawal, before a purchase/contract is concluded.

Condition: used, mileage: 39,440 km, power: 125 kW (169.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,272 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 1170. P653045 ----EQUIPMENT * Smartphone storage including wireless charging * Storage above roof lining * Rear door step * Electrically folding exterior mirrors * Exterior mirrors without indicators * Seats: Two-seater passenger seat * Front side indicators * Active Brake Assist * Ceiling light in cargo/passenger compartment - with door contact * Anti-theft alarm and intrusion alarm system * Digital owner's manual * Entry handle on rear left corner pillar * Electrical system for trailer socket in conjunction with 14 V/250 A generator * Chassis stabilization level I * Misfueling protection Ljdewapvbopfx Ahajah * Seat belt warning system for passenger seat * Grab handle for driver and passenger entry * 93-liter main tank * Wooden floor (cargo area) * Interior trim in cargo area up to roof height - wood * Hinged lid for storage compartment * Tempmatic air conditioning system * Comfort overhead control panel * Seats: Comfort driver's seat * Cargo area lighting via motion detector * Load securing: Tie-down rails on the side wall and roof frame * Load anchoring rail system * Cable duct on the rear portal * Cable duct on the side wall * Navigation accessories: Live Traffic Information * MBUX multimedia system with 7-inch touchscreen. High-resolution 7-inch touchscreen (960 x 540 pixels). AM/FM radio with dual tuner. Bluetooth connectivity with audio streaming and hands-free function. Smartphone integration via Android Auto or Apple CarPlay. Multimedia connection unit for connecting portable devices via a USB-C interface. 4 x 25 W output power, tone adjustment, separate volume settings for audio and phone. 2-way speakers at the front. * Marker lights, side. * Steering wheel: Multifunction steering wheel * Navigation voice control: LINGUATRONIC Wi-Fi hotspot. Multimedia connection unit for connecting portable devices via an additional USB-C interface. Center-fill speakers for improved sound and voice output. Improved hands-free function. Dual-phone operation Digital owner's manual * Navigation: 3 years of free map updates * Fog lights with cornering lights * Acoustic package * Instrument panel charging package The charging package expands the charging options in the cockpit with two 5V USB-C ports and a 12V socket. One USB port and the 12V socket are installed in the center storage compartment of the instrument panel, and another USB port is located in the lower section of the center console. This allows charging of electrical devices such as mobile phones within easy reach of the driver and front passenger. * Package: Parking package with 360° camera, Parking Assistant, Rear Cross Traffic Alert, Drive Away Assist * Radio: Digital DAB radio * Wheel arch loading * Double rear door, opening to the side wall * Vibration damper * Heated driver's side seat * Heated passenger seat (2-seater) * Power socket in passenger compartment * Cruise control * 5 V USB socket * Load securing: Tie-down rails on side wall on parapet belt * Front axle with increased load capacity * Electrical pre-installation, configurable special module * Elimination of vehicle lowering * Long-range nozzles in instrument panel * ADAPTIVE ESP * Storage above windshield * Storage compartment under cockpit * Rear towing eye * Axle ratio i = 3.923 * Driver's side airbag * Electric adjustable and heated exterior mirrors * Outside temperature display * Hill start assist * Third brake light * Adaptive brake lights * DPF, SCR * Tachometer * Entry handle on r

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Laodpfxswav R So Ahash Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Vibratory feeder, circular feeder, vibratory parts feeder 640 mm, used machine Manufacturer: Gasco Type: BVN 4 Laodpfx Aexnc S Nehash Overall dimensions: Width: 720 mm Depth: 720 mm Height: 510 mm Electrical data: 230 V, 2.5 A, 575 W Bowl size: 340–640 mm

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented Ljdexw Rdlopfx Ahaeah 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: good (used), Machine type: Vibratory bowl feeder / Parts feeding systems Design: Bowl feeders and linear tracks Version: Multiple feeding systems available Conveying system: Vibratory bowl feeder with linear track Feeding unit material: Stainless steel / Metal construction Function: Automatic feeding and orientation of plastic parts Laedoytqgmjpfx Ahajh Application area: Injection molding automation / Assembly systems / Packaging lines Buffering system: Bowl container for parts storage Integration: Component of automated production lines CE marking: Available Further information, technical specifications, and quantity upon request.

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-230 Serial No. 05.833/00, Year of manufacture 1969 Trough diameter 1100 mm Total trough outer height approx. 650 mm Working container / gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, infinitely variable Motor power 7.5 kW Power connection 400 volts, 50 Hz - Operating time can be set manually and via a timer - Infinitely variable motor speed via a variable gear drive - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated cover - Manual separation flap - Integrated sieve separation device after the separation flap - Liquid connection - Material outlet opening 180 x 150 mm - Control cabinet for wall mounting - Partition cover with perforated sieve Space requirement with base L x W x H 1800 x 1750 x 1700 mm Weight approx. 1800 kg Good condition Functional description: The workpieces and abrasive media are put into motion and gently tumbled by the generated vibration. Laodpfx Ahefqpxieaeh The constant relative movement between the workpieces and the abrasive media causes deburring and surface finishing of the workpieces.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. Ljdpfsvvu Snex Ahasah The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Condition: good (used), Pot diameter: 600 mm Laedpsh Rfffsfx Ahaoh Vibration: adjustable

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Laedpfxjy Iu N Ao Ahajh Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: new, Year of construction: 2026, MBSM 150-20 For grinding surfaces, edges, and for rounding High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Ledpfx Ahshk Df Deaoah Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Year of construction: 2008, condition: excellent (used), Electric heating rod Shock- and impact-resistant heating insert system with heating conductors embedded in silicone for airtight sealing. No wear, no corrosion, reliable operation even in continuous operation and under shocks and vibrations. Temperature setting via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressure surfaces on all sides. Standard gold-anodized finish, scratch- and abrasion-resistant, easy to clean. Lasdpfx Ajlcd Szohaoh Size: Type: EST 21 Length: 2100 mm Connection value: 1100 watts, 230 volts Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. Ledpfxeqlck No Ahaeah reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Ledeh Eiw Iopfx Ahasah Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information