Used Waterjet Cutting Pump for sale (22,312)

Condition: excellent (used), WetCoater 600 in lovely condition. Uprated model with HD heavy duty pump. Lsdpfx Asx Hbfhobnjac

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: BOMBA FLOWSERVE 36371.01.01, overall weight: 4,100 kg, total length: 5,200 mm, total width: 1,720 mm, total height: 3,000 mm, volume flow: 620 m³/h, operating pressure: 42 bar, final pressure: 43 bar, input voltage: 4,160 V, input frequency: 60 Hz, input current: 135 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 3,581 rpm, warranty duration: 12 months, protection type (IP code): IP56, New Flowserve 1100HP centrifugal pump; flow rate of 620 m3/h; model 10x6 IMP 440mm. Lasdpfxey Tcu Rj Abnsc

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: BOMBA FLOWSERVE 36371.05, overall weight: 2,060 kg, total length: 3,580 mm, total width: 1,900 mm, total height: 2,300 mm, volume flow: 720 m³/h, operating pressure: 14 bar, final pressure: 22 bar, input voltage: 460 V, input frequency: 60 Hz, input current: 440 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,785 rpm, warranty duration: 1 months, protection type (IP code): IP56, New 400 HP Flowserve centrifugal pump; flow rate of 720 m3/h; model 10x6 IMP 564mm. Lasdoy Tcczspfx Abnoc

Condition: good (used), Centrifugal pump, water pump, domestic water pump, garden pump, high-pressure centrifugal pump -Manufacturer: WILO, High-pressure centrifugal pump type Helix V1008-1/16/E/KS/400-50 -Power: 3 kW Lasdpfxowyaryj Abnjc -Flow rate: l/h -p max: 16 bar -Number: 2x pumps available -Price: per piece -Dimensions: 250/240/H950 mm -Weight: 47 kg/unit

Condition: not inspected (used), DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Ljdpfx Abozgckcsnsac Condition of the system The drum pump, feed hoses, dispensing unit, etc. are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure, max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 Adhesive control unit DÜRR (110017040) 1 Single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Lajdpfxozgci Ss Abnoc Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Leybold Two-Stage Rotary Vane Vacuum Pump Here, we offer a Leybold two-stage rotary vane vacuum pump. The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves for sealing, lubrication, and cooling. The pump housing is composed of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed down to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, forced-lubricated plain bearings Minimal air intake High leak tightness (4He-capable) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Discharge side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ledpfx Aezgbvqsbneac Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 db(A) with gas ballast: 59 db(A) Power connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection type: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Type: Trivac D 40 B Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a Busch dry scroll vacuum pump. Busch dry scroll vacuum pump Type: FO 0030 B 0110..ZZ Condition: used Scope of delivery: (See image) Ljdpfozgbvdsx Abnsac (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here, we are offering a vacuum pump for sale. Weight: 125 kg Oerlikon Leybold SCROLLVAC SC 60 D Suction capacity (50 Hz): 60 m³/h Suction capacity (60 Hz): 72 m³/h Oil-free High effective pumping capacity Low ultimate pressure Low-vibration operation Type: SC60D Condition: used Scope of delivery: (See image) Ledpfjzgbu Tsx Abnjac (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, total length: 1,200 mm, total width: 1,000 mm, total height: 850 mm, - Documentation available: No - CE certificate present: No - Serial number: Ep833738401005/02 - Transport dimensions: 1200mm x 1000mm x 850mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Lajdpfx Asx A Sw Rebnjc VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Rotor width: 250 mm -Rotor diameter: 260 mm Laedpozf Ng Ujfx Abnec -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Condition: good (used), Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck Lajdpfxev T Ufco Abnoc -Manufacturer: Efem, thread cutting head thread cutter four-jaw chuck type G3 -Cutting jaws: not included -Bore: Ø 27 mm -Hole: Ø 40 mm -Dimensions: 160/130/H175 mm -Weight: 3.8 kg

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Busch, rotary vane vacuum pump -Type: RC 0025 E 501 -Drive: 0.75 kW / 1410 rpm Ljdpjy Tkivsfx Abneac -Vacuum: 20 mbar -Dimensions: 560/440/H340 mm -Weight: 37.5 kg

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Ledpfx Aevtcviebnoac Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Ljdpfxeydnw Dj Abnjac Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: excellent (used), Edwards Dry Pump We are offering an Edwards dry pump for sale. Boost speed m³/h – 1800 Forepump speed m³/h – 400 with intercooler Connection: 380-460V 3-phase 50/60 Hz Weight kg: 750 Type: iF30k NRC322000R Condition: used (Subject to changes and errors in the technical data and specifications!) Ledpfozfy N Hox Abneac We would be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2017, Item: AL-10509-CSF Pump 7.5kW CSF Inox Self-Priming Pump – Type ASH65-4-10/BM.CDPZTH1 Manufacturer: CSF Inox S.p.A. – Montecchio Emilia, Italy Model: ASH 65-4-10/BM.CDPZTH1 Year: 2017 (newer, used) Material: Stainless steel AISI 316L Power: 7.5 kW Speed: 1450 rpm Voltage: 400/690 V – 50 Hz ATEX certification: II 2G c T3 (Zone 1) Connection: 3″ sanitary fittings Lodpfezfhcnox Abnsac Condition: Very good, unused – stored in original wooden crate Description: High-quality stainless steel centrifugal pump from CSF Inox, suitable for use in hygienic and ATEX environments. The ASH-series pumps are designed for gentle and efficient transfer of liquid food products, beverages, dairy, and chemical solutions. The low-speed 1450 rpm motor provides smooth operation with reduced shear and foaming – ideal for milk, cream, wine, juice, or CIP applications. The pump housing, impeller, and shaft are made entirely of AISI 316L stainless steel, ensuring long service life and corrosion resistance. Typical Applications: Dairy and food processing lines Beverage, wine, and juice plants CIP cleaning systems Chemical and pharmaceutical installations ATEX classified areas Status: Ready for immediate delivery Location: Denmark

Condition: used, Year of construction: 2023, The machine is ready for demonstration at the warehouse in Blomberg. The machine is ready for painting and is already equipped with 1 Bings Marple 8/25 high-pressure pump (up to 175 bar) and 4 Sames-Kremlin AVX Airmix spray guns. Machine equipped with a changeover valve for quick paint changes lever switchable to up to 3 paint circuits and 1 flushing agent pump (options) Lodpfezf N Thsx Abnjac The machine is in an Ex-rated version. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width 1,200 mm (1,300 mm) - Single-gun drive - Dry extraction - Belt conveyor system - Feed speed continuously adjustable 2–8 m/min - With paint recovery - Gun control PLC, LS - Number of installed paint circuits: 3 - Number of spray guns installed: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25 up to max. 175 bar - Includes supply air filter hood - Suitable for water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Volts, Hz 400 / 50 - Color RAL 7035, light gray - Weight 3,100 kg _____ Optionally, we can also provide you with a quote for the installation and commissioning of the system, as well as employee training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Trumpf Quicksharp, year of manufacture 2008. Lodpjzgfuqjfx Abnsac Immediately available.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Faldo cutting machine, 72 cm, in very good condition and available immediately! Ljdezfgrbjpfx Abnjac All of the equipment mentioned is not for sale or resale in Russia, or in any country subject to an EU embargo.

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas control unit incl. automatically rotating plasma beveling unit Bevel System 2015/350 Lasdpfx Abew Rpvbsnsc Filter system Downflow 3DFP9-SP Power: 9 kW Laser diode 23626ä

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Laedpfoy Auxmjx Abnec Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control ä23626

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x Plasma torch with Kjellberg Q1500 plasma power source with automatic O² gas console (O², N²) 1 x TEKA filter system, outdoor installation 1 x Nesting software integrated into the machine control system Ljdpfsytqmmsx Abnoac Availability: immediate 23626

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Lsdpfx Aeypdl Iebnsac Year of manufacture: 2014 Operating hours approx.: 7,024 Control system: iMSNC Working area: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with universal gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without extraction system 1 x nesting software Asper Win Basic + automatic nesting on the machine control system 23626ä Universal gas = enables the switching of gases to adapt the cutting quality and cutting speed to the material.

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track width: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA Laodpfxeykruao Abnec 1 x marking unit FineMarker Without table, filter, and rail system ä23626