Hydraulic cutting shear swing cut

DURMA SBT 4012

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, sheet thickness (max.): 12 mm, back gauge: 1,000 mm, working length: 4,100 mm, TECHNICAL DETAILS Sheet length: 4,100 mm Sheet thickness: 12 mm Backgauge: 1,000 mm Sidegauge: 1,500 mm with scale, T-slot, and tilting cam Sheet support arms: 2 x 1,000 mm, with T-slot Total power requirement: 30 kW Control and drive Control: ELGO (for backgauge) Ljdpfx Agswcqzkjzoak Backgauge drive: Motorized, on recirculating ball screws, foldable Knives Lower blade: 4-way reversible Upper blade: 2-way reversible MACHINE DETAILS Dimensions (L × W × H): 5,350 × 2,250 × 2,250 mm Weight: approx. 16,300 kg EQUIPMENT - Swing-cut design - Clearly arranged control panel mounted on a swivel arm - Adjustable cutting length for efficient processing - Hydraulic hold-down devices positioned close to the cutting edge - Foot switch - Central manual cutting gap adjustment - Easy blade replacement and resharpening - Operating instructions in German

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm Lodpfx Agerdi Dlszsak column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized control Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for access protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Extremely heavy-duty machine in very robust construction Base machine dimensions L x W x H: 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Transport space required (base machine) L x W x H: 4650 x 2610 x 3200 mm Transport space required (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Ljdpfx Ajd Hxx Ajgzeak Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau. Test cuts possible.

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Lodpfx Agsxddvnszsak Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm Laedpferz Tutjx Agzjk - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: app. 19.500kg Lodpfx Agsd A Hbcszjak Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Condition: ready for operation (used), Year of construction: 1999, Pressbrake PIT 400 Nominal force 400 to Table length 5100 mm Lajdpfeil Anrex Agzjk Crossrail travel 230 mm

Condition: like new (used), GEKA HYDRACROP 80 SD Laodpfx Agov Skg Tszjk

Condition: good (used), Year of construction: 2001, Machine is in good condition. Lodpfx Asrpk Rmogzoak Parts shown by hand not come. Cutting tools not come.

Year of construction: 2021, condition: new, Fastech horizontal bandsaw semi-automatic BMSY 360 DGH ECO Round cutting range mm: 360 Flat cutting range mm: 510 x 360 Square Cutting range mm: 360 +30 ° Round cutting range mm: 360 +30 ° Flat Cutting range mm: 440 x 360 +30 ° Square Cutting range mm: 360 +45 ° Round Cutting range mm: 360 +45 ° Flat cutting range mm: 390 x 360 +45 ° Square cutting area mm: 360 +60 ° Round cutting range mm: 200 +60 ° Flat cutting range mm: 200 x 360 +60 ° Square cutting range mm: 200 -30 ° Round cutting range mm: 360 -30 ° Flat cutting range mm: 440 x 360 -30 ° Square cutting range mm: 360 -45 ° Round cutting range mm: 360 -45 ° Flat cutting range mm: 390 x 360 -45 ° Square cutting area mm: 360 -60 ° Round cutting range mm: 260 -60 ° Flat cutting range mm: 260 x 360 -60 ° Square cutting range mm: 260 Engine power main drive kW 3 Hydraulic pump power kW 0,37 Engine power coolant pump kW 0,12 Band speed, infinitely variable: m/min.20 - 100 Saw band dimensions mm: 4800x34x1,1 Working surface height mm: 860 weight kg: 1450 Lsdpfxjg Ektto Agzeak length / depth / height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle