Used Web Guiding System for sale (8,126)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Cgedpfxoxf Up Ue Af Del Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, bore capacity in steel (diameter) 40 mm throat 380 mm Cgedpjxddtyofx Af Dol bore stroke 160 mm 4 speeds 60 - 1250 U/min total power requirement 3,3 kW weight 900 kg Features: -Gear drilling machine with a robust design -Column-mounted drilling table -Right/left rotation -Feed -Coolant system

Condition: good (used), functionality: fully functional, mount diameter: 80 mm, throat depth: 200 mm, spindle mount: MK 1, table width: 320 mm, table length: 250 mm, stroke length: 70 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine Cgodewzaqxepfx Af Del -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz morse MK-1 chuck max drill size: M6 -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm -Reach: 200 mm -Column Ø: 80 mm -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Vertical Turning Lathe – WEBSTER & BENNETT R48R 2PB C-axis, driven tools Condition: Used Year of manufacture: 2006 CNC: Siemens 840D Powerline Technical Specifications Faceplate diameter: 1,200 mm Turning diameter: 1,200 mm Number of slides (ram): 1 Ram stroke: 1,200 mm Ram cross-section: 200 × 200 mm Max. workpiece height under crossbeam: 1,200 mm X-axis travel: 1,200 mm C-axis: available (C-Axis) Drives / Speeds Main spindle motor: 37 kW Main spindle speed: 0.2 – 430 rpm Milling spindle motor: 17 kW Milling spindle speed: 20 – 3,000 rpm Csdpfx Afoxl E R Ne Degl Tool changer Turning: 50 positions, Capto C6, robot handling Milling: 10 positions, ISO 50, robot handling Other features Magazine and stations for turret/tool holders Machine weight: approx. 18 t Scope of delivery as described above only. Further options/accessories only as per written agreement.

Condition: excellent (used), bore capacity in steel (diameter) 35 / 45 mm throat 330 mm Cedpfxount Rpj Af Dogl bore stroke 200 mm morse taper MK 4 table diameter 600 mm spindle turning speed - stepless 80 - 1800 U/min table adjustment - upper 450 mm spindle stroke 400 mm total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,5 x 1,2 x 0,8 m automatic feed.

Condition: used, Year of construction: 1970, Webo Gradua 40 Column Drilling Machine Details: Drilling capacity in steel (diameter): 40 mm Throat: 360 mm Drilling stroke: 240 mm Tool holder: MT 4 Speeds: 56 - 1250 rpm Drill motor: 2.0 / 2.4 kW Feeds: 0.12 - 0.19 - 0.26 - 0.4 mm/rev Table size: Ø 625 mm Column diameter: 240 mm Drill head vertical adjustment: 400 mm Total power requirement: 2.5 kW Space requirement approx.: 1.1 x 0.8 x 2.3 m Machine weight approx.: 1100 kg Control: conventional Cgedpfxoxq S Irj Af Dol The machine was in operation until dismantling. Pickup in 75053 Gondelsheim. Forklift available for loading. Shipping by freight carrier possible; please inquire with your postcode.

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Cedpfx Asxpu Tbsf Djgl

Condition: good (used), T-slot clamping plate for a radial drilling machine Dimensions L x W x H: 2500 x 1130 x 260 mm T-slot width: 20 mm Number of T-slots: 3 Cedpfx Afov N Et Nj Degl T-slots not continuous across the entire length Weight: approx. 2 t Siegfried Volz Machine Tools Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Cgjdpfofp A I Ejx Af Dol Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. Codpfjqpft Ijx Af Dogl - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Condition: like new (used), Stainless vacuum packer, chamber dimensions 500mm x 430mm x 100mm, seal bars 400mm, timer / temp controls, mobile, 3Ph Csdpfxsfhdt He Af Dogl

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm throat: 100 mm spindle turning speed range: 6300/9000 rpm engine: 380 V, 0,18 kW space needed: 470 x 250 x 520 mm weight: 39 kg Cjdpfxjfnbgqe Af Degl

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Cjdpfx Afem Sg Hco Degl

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Compact electric rotary oven Sveba-Dahlen with rotary platform, suitable for bakeries with limited space. Touch control panel with Sveba-Dahlen system Dual fans for even airflow Powerful heat exchanger - fast heating with low consumption Cgodotltr Njpfx Af Dol Strong overlapping insulation - effectively prevents heat leakage Stainless steel exterior and interior - keeps the surface temperature low and makes cleaning easier Strongly constructed stainless steel hood for efficient collection of fumes when the door is opened Parameters Sheet size: 600 x 800 mm Outer dimensions of the oven (w x h): 1450 x 1333 x 2445 Heating: electricity (60kW) Number of trolleys: 3 pcs Trolley dimensions (w, h, h): 675 x 825 x 1795 mm Oven is in very good condition. Used only 5 years in small bakery.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Cgedpfx Aexlcfksf Del Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Cgsdjxghz Hspfx Af Djl

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668 Codpfx Aetpg Dnjf Dogl

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Codpfxoif Rvae Af Dsgl

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set Cgsdpfxow Dbkrj Af Del -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Slide travel (X-axis): 1000 mm Main drive motor: 41 kW Cgjdoxg Nmkepfx Af Dsl Tool changer: 30 positions Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Condition: good (used), functionality: fully functional, Working from production, has always run with an 800 mm extrusion head for producing HDPE pipes. Csdpswr Db Nsfx Af Djgl

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER Cgsdpfx Aswaxuajf Dol • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Cedevuzqzopfx Af Dsgl Screw diameter 87 mm Connection Load 90 kW

Condition: good (used), WEBER tube extrusion line including: Cedjvryhyjpfx Af Dsgl WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. Cgedoq Tr Tbopfx Af Del - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D