Used Weinbrenner Wps Servo 20050 for sale (18)

Condition: like new (used), Year of construction: 2023, Exhibition press – 159 tons Year of manufacture: 2023 Control system: Delem Da-66T with touchscreen Pressing force: 36 tons Bending length: 1300 mm Stroke: 150 mm Approach speed: 150 mm/s Working speed: 10 mm/s Return speed: 150 mm/s Connected power: 21 kW Power supply: 400 V / 50 Hz / 3~ Tool clamping force: 50 bar Csdpfszcldlsx Ah Ieha Dimensions (L × W × H): 2050 × 2050 × 2310 mm Weight: 4350 kg

Condition: used, Year of construction: 1995, machine/vehicle number: 1453G, functionality: fully functional, operating hours: 71,614 h, pressing force: 80 t, stroke length: 340 mm, table width: 2,550 mm, table length: 2,550 mm, overall weight: 7,800 kg, A YouTube video demonstrating the operation is available! We offer this used Weinbrenner GP 80-2550 press brake for sale. The control system was upgraded to a Cybelec VisiTouch Pac in 2023. The press brake is in good condition, well-maintained, and currently still in production. Over the years, various components have been renewed (drive motor, belts, guides, rear stop fingers, compressed air lines, etc.). The machine received service from B+Z in 2026. A large amount of tooling is included. 2 upper tool sets and 1 lower tool set (3V die) have been re-sharpened by UKB; invoices are available. The machine has UKB adapter strips in the lower tool, allowing the use of lower tools with the Trumpf system. A laser angle measurement system from Data M Engineering (Laser Check) has been installed on the machine. Upon purchase of the machine, the buyer will receive comprehensive training on its operation. The machine is being sold because we have had a second Weinbrenner with a 3m bending length for a year. This became necessary because a flatbed laser with a 3m processing length was also acquired a year ago. Since we now need the space of the old press for final assembly, it is being sold. Location: 82538 Geretsried Equipment: - Factory number: 1453G - Year of manufacture: 1995 - Working width: 2550mm - Controlled axes: Y1, Y2, Z1, Z2, X, X1, R, 2x bending assist, crowning, die shift - Hydraulic ram clamping - Hydraulic die clamping - 2 bending assists - Control system upgrade to Cybelec VisiTouch Pac in 2023 - Weight: 7800 kg - Press force: 80 tons - Ram stroke: 340 mm Cedpfjzmmwtjx Ah Ioha If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 1994, pressure 160 t chamfer lenght 3050 mm distance between columns 2550 mm stroke 400 mm Cedpfozfav Tex Ah Ieha throat 250 - 400 mm weight of the machine ca. 15.400 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, Press force: 160 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 250 - 400 mm Machine weight approx.: 15,400 kg Equipment: -Hydraulic tool clamping, top and bottom -Cybelec DNC 900 control system -Die shifting -Compensation -2-hand foot control -Controlled axes: y1, y2, x, R, z1, z2 Chodpfszd S Tzox Ah Ija -Tool set

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t Cedpfx Ahju Ib D Ej Ieha chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: used, Year of construction: 1988, pressure 100 t Csdpfx Ahjtqqyqs Ieha chamfer lenght 2050 mm distance between columns 1550 mm throat 250 mm stroke 200 mm adjustment of press crosshead 200 mm stroke speed - idle stroke downwards 105 mm/sec stroke speed - idle stroke upwards 180 mm/sec stroke speed - under load 9,5 mm/sec table width 200 mm table height over floor 900 mm dayligth 280 - 480 mm back stop - adjustable 3 - 729 mm control CYBELEC SYNCHRO control CNC 7400 PS total power requirement 7,5 kW weight of the machine ca. 10 t dimensions of machine L x W x H 3,70 x 2,00 x 2,80 m - 4 axis controlled - Accessories: programmable back gauge, table extensions, various upper and lower dies segments

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Space requirement approx. 4300x2750x3750 mm Chodpfx Ahjwn Ebio Iea Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard

Year of construction: 1992, condition: good (used), Control system upgrade in 2022 to CYBELEC VisiTouch Pac Press force: 200 t Bending length: 3050 mm Frame width: 2550 mm Control system: CYBELEC VisiTouch Pac Ram stroke: 524 mm Machine weight approx.: 17,000 kg Equipment: - Control system upgrade in 2023 to CYBELEC VisiTouch Pac - Controlled axes: Y1, Y2, X, R, crowning - Hydraulic ram clamping Csdjim R N Hjpfx Ah Isha - Hydraulic die clamping - 4-stage pneumatic die adjustment

Condition: good (used), Year of construction: 1992, functionality: fully functional, Pressure: 200 t Bending length: 3050 mm Distance between uprights: 2550 mm Ram stroke: 274 mm Control: Cybelec ModEva Pac Approx. machine weight: 17,000 kg Accessories/Equipment: - Control conversion to Cybelec ModEva Pac - 2 bending aids in front of the machine - Fiessler light curtain in front of the machine Chjdpfjxb Sugex Ah Isa - Foot switch

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm Chedpfxob N Erbj Ah Isa power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg

Year of construction: 1981, condition: used, working width: 4100 mm metal sheet thickness: 16 mm Chsdpfxe Dig Do Ah Iea throat: 300 mm rear stop: 1500 mm power: 400 V, 45 kW space needed: 4800 x 3500 x 2600 mm weight: ca. 28000 kg

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm Chedpfet I D U Eox Ah Ija stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: used, Year of construction: 1995, pressure 80.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 250 mm table width 85.0 / 135 mm stroke ca. 390 mm dayligth ca. 585 mm ajustment speed 180 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec work height max. 1050 mm Number of working hours 32.495 h Chjdoxachuepfx Ah Ioa oil volume 200 l operating pressure 320 bar total power requirement 11.6 KW weight of the machine ca. 7300 kg range L-W-H 3700 x 2000 x 3000 mm Good/well-maintained condition (!!) - in checked conditions - machinevideo - ?v=IKyUmzB0WTI ----- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ----- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, overall weight: 18,500 kg, controller model: Cybelec DNC 1200, working width: 3,550 mm, bending force (max.): 250 t, distance between stands: 3,000 mm, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Cjdpjx I Ebiofx Ah Isha Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: used, Year of construction: 2018, sheet width 4050 mm plate thickness 20 mm Chsdoyqvchopfx Ah Ija distance between columns 4100 mm column daylight 4200 mm no. of strokes 10-20 Hub/min working pressure 250 bar total power requirement 85 kW weight of the machine ca. 43,6 t dimensions of the machine ca. 5,5x2,8x2,9 m No. 793 Please note: this machine has no electrical system. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1967, condition: good (used), Overhauled in 2000, hydraulics and electrical system updated, table dimensions 3600x400. Csdpfx Aelml Drsh Isha

Year of construction: 1986, condition: ready for operation (used), Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible. Chsdoywlp Ejpfx Ah Iea

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Cedpfswxb Igjx Ah Ioha