Used Wet Cutting Machine for sale (67,281)

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). Nsdpjv Iaqyefx Almjlf FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: Nlodpfxjy Umd Ej Almsf - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert Nsdpfx Asy Umdljlmolf

Condition: used, Year of construction: 1995, CNC portal cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of construction: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel torches, type ALFA 8 x Omnilift 200 Njdpfjyay Dhex Almjlf Without track Without table Without filter 3826ä

Condition: ready for operation (used), HAGEN & GOEBEL / Internal thread cutting machine -Type HG 22 EB -Speed range 180 - 1120 rpm -Thread size up to max. M22 / steel -Thread size / cast iron up to max. M 27 -Thread size aluminum / brass max. M 33 Nlodpfx Aezu Nzwolmjf -Smallest thread size M6 -Single stroke / continuous stroke -Table dimensions 600x500mm Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1000 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Height (mm): 1570mm Nedezupvujpfx Almslf Description: Includes Thermal Dynamics A40i plasma source & various wear parts.

Condition: used, Year of construction: 2011, laser hours: 68,800 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, We are offering this used TRUMPF TruLaser 3040 laser cutting machine, manufactured in 2011. Nedpfx Alszvbhxomslf Material number: 1441919 Control cabinet: TruLaser 3040 Power type 3: 50 Hz Voltage: 400 V Max. fuse rating: A Wiring diagram / version: 93730-5-210_05 Wiring diagram / version: 93730-5-2000_05 Wiring diagram / version: 93730-5-3000_05 Serial number: 933 Year of manufacture: 2011 Equipment number: A1240A0148 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit Nodpfx Ajzuyg Rslmslf ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added according to customer requirements. The MEBR+ operates in full rotation and semi-rotation modes. The semi-rotation mode is suitable for small print runs, while the full rotation mode is ideal for large print runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and deceleration phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system, which ensures excellent web tension control when the machine operates in semi-rotative mode. Standard features: - Maximum rotation speed 200 m/min (656 ft/min) – label stock - Maximum rotation speed 120 m/min (394 ft/min) – die-cutting, precision fit - Maximum semi-rotation speed 40 m/min (131 ft/min), depending on the plate size – die-cutting, precision fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter, as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of rotary knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40, and 76 mm (1, 1.5, 3 in) - Detection of paper and matrix tears Nlodpfxezqnxtj Almef - Winding upon label entry/label exit - Remote support via internet connection - Automatic stop at the end of the parent roll with programmable end-of-roll function - Semi-automatic winding - Foot pedal for step-by-step machine operation - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotation mode - Die-cutting repeats 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotation mode - Maximum winding diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwinding diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 anti-static bar 1 "Clear-on-Clear" sensor 1 corona treatment 1 speed package (80 m/min in semi-rotation mode) 1 revolver unwinder 2 flexo unit for spot coating with rotating register 1 web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotary mode approx. 700 die-cutting sheets An MAHO extraction system for the trimming waste is available as an option at an additional cost!

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Nsdpfx Aowiatijlmjlf Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: used, Year of construction: 2014, ROFIN SCx30HP10.6SMNC CO₂ laser source with control cabinet – Year of manufacture: 2014 Nedpfszu Iwdjx Almslf For sale is a used ROFIN SCx30HP10.6SMNC CO₂ laser source from an industrial application, including the existing control cabinet. The unit is in very good used condition and was in operation until it was professionally dismantled. Since the dismantling, the unit has not been re-tested. Technical data laser source Manufacturer: ROFIN Type / Model: SCx30HP10.6SMNC PN: 004-0243-00 Serial number: SCX30/9812 Revision: 5 Year of manufacture: 09/2014 Weight: approx. 63 kg Protection class: IP54 Tube: 44K Tube SN: 441797 Further PN: 002-0023-00 Laser specifications according to the nameplate Laser class: 4 Wavelength: 9 µm – 12 µm Average power max.: 500 W Pulse power peak max.: 1,500 W Pulse duration max.: 400 µs Equipment / Scope of delivery ROFIN SCx30HP10.6SMNC CO₂ laser source Control cabinet included Sale according to the pictures Further accessories are only included if visible in the pictures or expressly mentioned. Condition Very good used condition. Dismantled from a running industrial system. In operation until dismantling. Not re-tested after dismantling. Dismantled and stored. Technical data, condition and completeness should be checked by the buyer before purchase. Subject to prior sale and errors.

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg Nlsdpfedzp T Tox Almef good condition

Condition: good (used), Year of construction: 2013, Used plasma cutting machine from Haco Type: Compact 3015 Table dimensions: 3000 x 1500 mm Nedpfxjznun No Almelf Hypertherm HPR 130 amp power source Includes spare parts

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Nljdpfey D A Ifjx Almof Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: excellent (used), Year of construction: 2013, Perfecta 168TS BASA fully automated cutting system year 2013 consisting of Perfecta 168TS cutting machine BASA 7 automatic jogger with automatic paper feeder ZTS 2000 paper pile loader for the rear table of the cutting machine BA6 unloader very little use very good condition located in Germany testing possible Nljdpfszqtpdex Almef

Condition: new, · Die easy to replace Nledpfjfg Ahuex Almof · Automatic feeding with double sheet detection and automatic correction · Allows plain paper, coated paper, cardboard, PE film, etc. · Mainly suitable for stickers, tags, wine labels, playing cards, small boxes, etc. · Rotary die-cutting machine with magnetic cylinder · High pile suction feeder · Touch screen · Machine with automatic stripping · Three-cylinder system, with cover plate · Precision pressure adjustment · Wrap-around ejection system · Sensor for top reading and front registration

Year of construction: 2006, condition: good (used), Fully operational GOODSTRONG GMC-TC 1600 paper/cardboard roll-to-sheet cutting machine, manufactured in 2006. The machine is designed for the industrial conversion of paper and cardboard rolls into cut sheets. The system features an automatic edge-guidance mechanism that ensures precise positioning of the paper web during cutting, while the double rotary knife assembly guarantees clean and accurate edges. Nodpezt R Hfjfx Almelf Model: GOODSTRONG GMC-TC 1600 Year of manufacture: 2006 Roll (web) width: 400–1600 mm (16″–63″) Simultaneous cutting: Up to 4 rolls at once Paper/cardboard grammage: 40–700 g/m² Cutting length: Up to 3000 mm Maximum cutting speed: Up to 300 m/min Control: Microcomputer system, AC servo motor, touchscreen panel Automatic edge guidance web system Double rotary knife

Condition: used, Year of construction: 2000, cutting width 55 cm Nodey Tpmtopfx Almslf feeding depth 57 cm feeding high max. 9,5 cm

Condition: used, Year of construction: 1978, cutting width 38 cm feeding depth 30 cm feeding high max. 10 cm Nlsdpfezt Szqjx Almjf serial no. 2949-003 three knife trimmer

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Nodpfxozrfdij Almjlf Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, laser power: 6,000 W, CNC Laser Cutting Machine TruLaser 3030 Fiber (L81) 6000 Watt X Working area max.: 3000 mm Y Working area max.: 1500 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Operating hours: 13987 hrs. Laser beam on: 5321 hrs. Sheet metal thickness, steel max.: 25 mm Sheet metal thickness, stainless steel max.: 25 mm Sheet metal thickness, aluminum max.: 25 mm Sheet metal thickness, copper max.: 10 mm Machine: Working area: 3000 x 1500 mm Enclosed machine frame Cooling unit for machine and laser (water-air) Longitudinal conveyor Motion unit for highly precise machining Work area lighting Position laser diode Spray device Automatic nozzle cleaning Gantry drive in combination with linear direct drives Integrated control cabinets Integrated cabinet Enclosed beam guidance via laser light cable (LLC) Machine status indicator Machine ambient temperature 5 to 35 °C Laser: Excitation via pump diodes Laser power control Cutting unit: 1-cutting head strategy Universal cutting unit with adaptive lens system Protective glass Online condition monitoring of the protective glass Control system: Fast reproduction Control system SINUMERIK 840D SL Ergonomic control panel with 21.5″ wide-screen multi-touch color display Integrated technology data Copper cutting package • Cutting data O2 and N2 Brass cutting package • Cutting data N2 Automatic shutdown Programmable cutting gas/pressure selection Microweld Remote support interface Multi-sheet processing (• Not possible in combination with automation) Condition Guide Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine (• Additionally available with TruDisk 6001: Regulation and monitoring of the piercing process) FocusLine Data transfer: USB interface RJ-45 network interface Nljdjzpy Rxspfx Almjf Central Link Online Update Manager • Automatic download of updates via remote support connection • Installation of the updates when the machine is switched on or by the customer or by TRUMPF Service • To use, the Online Update Manager must be activated; deactivation by the customer is possible at any time Safety: CE marking Light barriers Multi-chamber extraction system Machine enclosure with certified viewing window, door on the right Extended standard equipment: Compact dust collector Sliding roof Automatic pallet changer in longitudinal direction Support strips made of construction steel External solid-state laser TruDisk 3001 with 1 LLC output Power supply for TruDisk via the machine - External solid-state laser TruDisk 6001 - Performance package for melt cutting - Cutting package Highspeed - Cutting package Highspeed Eco - BrightLine fiber - CoolLine - DetectLine - Drop&Cut - Integrated camera for process monitoring - Nozzle changer - Viewing window, door on the left - Preparation for LiftMaster - Tube cutting device RotoLas

Year of construction: 1999, condition: used, Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement. Nljdpfszun U Asx Almef

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: 1 x Summa 1400 FME-p Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Nedpfx Aszb Aktslmelf Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, compressed air connection: 10 bar, overall weight: 11,700 kg, total length: 9,229 mm, total width: 6,145 mm, total height: 2,200 mm, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, safety light barrier, We offer this used TRUMPF TruLaser 3030 laser cutting machine, manufactured in 2007. Laser power: 3200 W Machine no.: A0220A1818 Year of manufacture: 2007 Power supply: 400 V / 50 Hz Connected load: 73 kVA Nlodpfx Aljzt I U Hsmof Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Technical information: Nodpezuzimsfx Almolf Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons