Used Window Construction for sale (29,338)

Condition: used, Used stackable steel bin, measuring 1050x580x470 mm. Itodpfx Aex Ahrwogzor A stackable steel bin offers advantages in storage efficiency. This design allows multiple bins to be safely stacked on top of each other, resulting in organised storage and maximum utilisation of vertical space. The bin can be moved with both a pump truck and forklift. It

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves Iedpfx Ajx D Df Nogzstr - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: excellent (used), For sale: Steady rest for lathe. Professional workshop equipment for stable guidance of long and heavy workpieces during machining. Solid cast iron construction – maximum rigidity and durability. Working opening approx. 150 mm (measured with caliper). Opening frame – quick and convenient clamping of the workpiece. Adjustable pins with sliding tips. Attachment to the lathe bed via a base with hole. The steady rest is intended for turning shafts, tubes, bars, and other long elements that require support during machining. Itjdew Sfpyjpfx Agzor

Condition: excellent (used), Year of construction: 2015, ARCEN MOBILE CONCRETE BATCHING PLANT Isdpfxjx Dg Tce Agzetr YEAR OF MANUFACTURE: 2014/2015 CAPACITY: 3750L/2.5M3 CONTROL SYSTEM CHEMICAL DOSING BOILER ROOM CATERPILLAR GENERATOR COMPLETE, WORKING, GOOD CONDITION

Condition: excellent (used), Tool OERTLI for SCM WINDOR IV 70 MM wooden window Itedpfehmpn Hex Agzsr IV 95 MM wooden window Wood Alu 70 MM More pictures/ sketch on request

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and milling carriage ..... Machine still in operation available for viewing! Optionally available with used tools and window design software for data transfer to the Unicontrol 12! Technical Data Summary (Please inquire about any additional accessories included) ..... Crosscut Saw ..... > Electronic crosscut saw, continuously adjustable horizontally > Number of tools: 1 > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut > Axial adjustment range: 150 mm, electronically continuously adjustable NC axis > Radial pneumatic adjustment range: 8 positions, e.g., for edge rounding from above Rounding Unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment range mechanically coupled to the cross-cut saw. > Radial adjustment pneumatically controlled on/off Electronic length stop ..... > Length 4,100 mm 1. Tenon and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Follow-up counter, the entire clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing area, including double part separation before the infeed of the longitudinal processing area. 1. Profiling spindle (up- and down-axis rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, continuously variable NC axis > Radial adjustment range: 80 mm, continuously variable NC axis > Spindle speed: 6000 rpm > Minimum tool travel circle: 140 mm > Maximum tool travel circle: 232 mm > 2 feed rollers, pneumatically controlled axially opposite the spindle, 8 positions 2. Profiling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm 8 positions > Radial travel 125 mm, 8-station turret > Spindle speed: 9,000 rpm Iodpfx Asxwdv Isgzjtr > Maximum tool travel: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, continuously variable NC axis > Radial travel 80 mm, continuously variable NC axis > Spindle speed: 6,000 rpm > Minimum tool travel: 140 mm > Maxi...

Condition: used, Used laundry rolling container with hinged shelves. The two swivel and two fixed-wheel rubber wheels make the container very manageable. The frame is made of electrolytically galvanised steel. These transport trolleys are specially designed to transport quantities of laundry and linen between laundry and final destination, so Iedjx Ahrkjpfx Agzstr

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation • Turn-key ready to use Iedpfx Asx D Dbkegzetr

Year of construction: 2025, condition: used, New: Yes Isdpfx Agsu H Tpkezstr Empty weight: 311 kg CE mark: yes Serial number: DPX-27513 Transport dimensions (LxWxH): 1,04x0,9x1,76 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, Used gitter box directly available at Kruizinga. Ijdpex Ahr Djfx Agzotr nl. This high quality steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackable capacity. This mesh container is ideal for small parts and very practical to use because of the 2 steel

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. Itsdpfxjx D A R Ds Agzsr • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Year of construction: 2025, condition: used, New: Yes Empty weight: 330 kg CE mark: yes Ijdpfx Asu H Tzyjgzetr Serial number: DPX-27512 Transport dimensions (LxWxH): 0,85x1,04x1,76 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, Batch offer of 10 used Poolgitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. Iodpfxex Ahtbj Agzetr This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 Iedpfx Agox D A Rkezetr - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Year of construction: 2025, condition: used, New: Yes Empty weight: 110 kg CE mark: yes Serial number: DPX-27509 Transport dimensions (LxWxH): 1x0,6x0,4 Itodju Hflqjpfx Agzjr Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, Lot offer of 4 used pole gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. Itodpfx Agox Ahthozjr This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh

Year of construction: 2025, condition: used, New: Yes Empty weight: 75 kg CE mark: yes Serial number: DPX-27506 Iodpfju Ex Uijx Agzetr Transport dimensions (LxWxH): 1x0,6x0,3 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, Used Pool gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from the largest supplier in Europe. Itodpjx Ahr Rjfx Agzer This steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh container is

Year of construction: 2025, condition: used, New: Yes Empty weight: 85 kg CE mark: yes Serial number: DPX-27507 Transport dimensions (LxWxH): 1x0,6x0,35 Production country: IT Isdpfx Asu En Rgsgzjtr Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Year of construction: 2025, condition: used, New: Yes Itodpfx Ageu Hfldezer Empty weight: 35 kg CE mark: yes Serial number: DPX-27500 Transport dimensions (LxWxH): 0,6x0,4x0,2 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 35 kg CE mark: yes Serial number: DPX-27502 Iedeu Hfk Hspfx Agzjtr Transport dimensions (LxWxH): 0,6x0,4x0,2 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Year of construction: 2025, condition: used, New: Yes Iedju Hfktjpfx Agzjtr Empty weight: 90 kg CE mark: yes Serial number: DPX-27508 Transport dimensions (LxWxH): 1x0,6x0,4 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 215 kg CE mark: yes Itsdpfou Hwbqjx Agzjr Serial number: DPX-27511 Transport dimensions (LxWxH): 0,85x0,7x1,76 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Year of construction: 2025, condition: used, New: Yes CE mark: yes Serial number: DPX-27550 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Iodpfx Agju H Tpwszotr

Year of construction: 2025, condition: used, New: Yes Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Itodpfx Agjiwudpszjr