Used Window Upvc Machines for sale (75,314)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Fodpfxjzvm Hyj Am Esgi Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Heidenhain iTNC 530 CNC control Travel ranges: X-axis 1.016 mm Y-axis 610 mm Z-axis 760 mm Spindle speed 10.000 rpm Tool holder HSK 80 Fodpsz S H H Dsfx Am Eegi Power 12 kW Table clamping surface 1.250 x 590 mm Table load 900 kg Feed rate 40.000 mm/min. Machine weight 9.400 kg Equipment: Heidenhain iTNC 530 CNC contouring control Electronic handwheel 3D touch probe tool changer 2-position pallet table Coolant system with internal coolant supply (ICS) Chip conveyor Oil mist extraction system

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Fedpfx Ajz D Aqujm Esgi Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors Fsdps Aa N Tbsfx Am Ejgi - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, Year of construction: 2005, power: 23 kW (31.27 HP), travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,900 mm, TECHNICAL DETAILS Working area X-axis: 3,390 mm Working area Y-axis: 1,570 mm Travel range X-axis: 4,400 mm Travel range Y-axis: 1,900 mm Panel passage: max. 250 mm Number of processing stations: 2 Number of controlled axes: 4 Feed rate X-axis: 80 m/min Feed rate Y-axis: 80 m/min Feed rate Z-axis: 25 m/min Number of rails: 8 Number of vacuum cups: 24 Drilling unit Number of vertical drilling spindles: 22 Number of horizontal drilling spindles X-axis: 6 Number of horizontal drilling spindles Y-axis: 4 Total number of drilling spindles: 32 Milling spindle Number of controlled axes: 4 Motor power: 13.5 kW Speed: 18,000 rpm Grooving unit Tool diameter: max. 120 mm Motor power: 1.7 kW Speed: 6,500 rpm Horizontal electro-spindles Number of outputs: 2 Motor power: 3.5 kW Speed: 12,000 rpm Number of tool positions: 10 MACHINE DETAILS Suction capacity of vacuum pump: 250 m³/h Total connection power: 23 kW Fgode Aihdtopfx Am Eoi EQUIPMENT Console and rail table CNC-controlled positioning of the rails CNC-controlled positioning of the vacuum cups Vacuum pump Drilling unit, top Milling spindle, top Automatic tool changer Fixed grooving unit in X-direction Horizontal electro-spindles Tool magazine at the rear of the machine Chip conveyor Windows control system BiesseWorks programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing and use of the machine at the destination. External reference: 8377

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, grinding wheel diameter: 200 mm, table load: 180 kg, spindle speed (max.): 2,850 rpm, TECHNICAL DETAILS Grinding length: 500 mm Grinding width: 250 mm Distance from table surface to spindle center: 450 mm Table load: max. 180 kg Table speed: 7–23 m/min Travel range X-axis: max. 560 mm Travel speed Z-axis: max. 990 mm/min Travel range Z-axis: max. 275 mm Travel speed Y-axis: max. 460 mm/min Grinding spindle power: 2.2 kW Grinding wheel diameter: 200 mm Grinding wheel width: 20 mm Grinding wheel bore: 31.75 mm Grinding spindle speed: 2,850 rpm MACHINE DETAILS Dimensions & Weight Dimensions (W x D x H): 2,300 x 1,650 x 1,680 mm Machine weight: 1,800 kg Connected power: 3.7 kW EQUIPMENT High-precision surface grinding machine of the Optimal series Automatic vertical feed Grinding cycle with roughing, finishing, and polishing Hydraulic table drive Infinitely variable table speed control Fsdpfo Airugox Am Eegi Siemens S700 touchscreen panel Electronic handwheel for the Y-axis Digital position indicator for the Y and Z axes Table cover and splash guard caps made of stainless steel Control cabinet with predominantly Siemens components Manual dressing device Electromagnetic clamping plate Coolant cleaning system Standard grinding wheel Grinding wheel arbor Dressing stand with dressing diamond Balancing mandrel Balancing stand Machine light Machine tool set Documentation including parts list CE version in metric version

Condition: used, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Year of manufacture: 1992 Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout Fgsdpjzwn Egofx Am Eei - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1993, Punching machine, manufacturer HAULICK & ROOS, type: RVD125-1180 NS, year of manufacture 1993. Consisting of: Unwinding reel with straightening unit Fgsdpfxo Aic A Se Am Eei Hydraulic press, Haulick & ROOS RVD125-1180 NS, pressing force 1250 kN Siemens control system Discharge conveyor Control cabinets. Total weight: approx. 25 tons.

Condition: used, Year of construction: 1991, Automatic metal sawing machine with hydraulic workpiece clamping, automatic material feed, and control panel for series processing of metal profiles and solid materials. Manufacturer: KASTO Machine type: Fully automatic sawing machine Year of manufacture: 1991 Operating mode: Automatic Material feed: Automatic Fsdpo Aiccaefx Am Eegi Workpiece clamping: Hydraulic Clamping device: Vise I and Vise II Feed: Adjustable rapid feed Operation: Central control panel Cutting length setting: Via preset counter Coolant system: Available

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H Fodpfe Ain Rkox Am Ejgi machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise Fsds Ain Iwopfx Am Esgi - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Fjdpfxe Ain Rco Am Ejgi Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Fods Ain Rgspfx Am Ejgi Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 1974, distance between columns 300 mm Fgjdpjx U A Rzjfx Am Esi table length 3550 mm table width 190 mm table height 800 mm distance between columns 3230 mm column arm 300 mm weight of the machine ca. 12,5 t dimensions of the machine ca. 1600 x 3800 x 2800 m

Condition: used, Year of construction: 1991, working area 225 mm table-size L:550 mm table-size B:200 mm sanding disc diameter 200mm mm magnetic plate size 500 mm weight of the machine ca. 1,8 t Fgsdpoud Algsfx Am Eei dimensions of the machine ca. 2000x1600x2100 m

Condition: used, Year of construction: 2013, controller manufacturer: Sonstige, controller model: Andronic 3060, _____ Description: Year of manuf. : 2013 Control : Sonstige Andronic 3060 Speed : 42000 rpm Movement X/Y/Z : 550/400/400 mm Tool holder : HSK-E40 Fjdpfx Amo Ail Nlo Eogi Spindle: Technology:Motorspindle Speed:42.000 rpm Power:17kW Taper:HSK-E40 NC-Swivelroundtable: Technology:Integrated 4./5.-Axis B-Axis:-/+ 110° C-Axis:360° Workpiecedimensions (max.):ø400 x 380 mm Workpieceweigth (max.):250 kg Palletclampingsystem:Parotec Partool clamping chuck In general: Toolmagazine:32 stations Rapid travers in X/Y/Z:30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Workpiecemeasurement:Touch probe, Renishaw OMP400 Toolmeasurement:Laser, BLUM Extraction:Graphiteextraction, Keller L-Cut Coolingmanagement I:Minimum lubrication Coolingmanagement II:Blow air through spindle Setup operations:Electronic handwheel Further Equipment:Spindlechiller Further Accessory:Misc. Pallets and electrode holders

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Fsdjw T Tlrspfx Am Eegi Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Swift Cut (ESAB) Type: Pro 2500 Year of manufacture: 2023 Working area: 1,250 x 2,500 mm 1 plasma torch with Hypertherm Powermax 125 power source Cutting thickness up to approx. 30 mm Water table - no filter system required Table weight (empty): approx. 1,000 kg Table footprint: 3,226 mm × 1,840 mm Automatic torch height control (Intelligent Torch Height Control - ITHC) Workpiece collision protection (Breakaway Head) and sheet alignment via software Compressed air requirements: Fjdpo Aivxkofx Am Ejgi Clean, dry air (ISO 8573-1 Class 1.2.2), 7.0–7.5 bar, approx. 300 l/min. Cutting software 101126

Condition: used, Year of construction: 2005, measuring range X-axis: 650 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, total width: 1,160 mm, total length: 1,380 mm, total height: 2,429 mm, overall weight: 775 kg, Measuring Machine Manufacturer: EROWA Type: PRESET 3D CNC Year of manufacture: 2005 Technical details: Measuring range X-axis: 650 mm Measuring range Y-axis: 700 mm Measuring range Z-axis: 500 mm Usable surface of the granite plate: 819 x 1,330 mm Max. workpiece weight: 650 kg Machine weight (approx.): 775 kg Machine dimensions (approx.): 1,380 x 1,160 x 2,429 mm Fodpoz Hqknjfx Am Eegi Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Year of construction: 2018, condition: ready for operation (used), Technical equipment and dimensions: Dimensions (L x W x H): approx. 5,300 x 2,400 x 2,600 mm Total weight: approx. 3,700 kg Integrated control cabinet 2 test stations Label printer Fsdpo Aiwh Nefx Am Eogi Various measuring and testing devices

Condition: used, Year of construction: 1980, drill diameter 2,4-13 mm Fedjztfzwjpfx Am Ejgi drilling length ca 165 mm lip angle 90-140 °

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t Fgjdpfsx Ni E Isx Am Eei ja

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB control system Travel ranges: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm Fgedpfx Ams Aiu Rws Esi Max. workpiece weight: 500 kg Machine weight: 1,700 kg Power supply: 13 kVA The machine can be inspected while powered on.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Fgjdpfj Ah E Sijx Am Eoi Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation - Excellent price-performance ratio Fgsds Ah Eyqspfx Am Eji - Optional winding station / automated cushion roll production - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!