Used Zimmermann Fz 37 for sale (26)

Condition: excellent (used), Year of construction: 2014, x-travel 8000 mm y-travel 3500 mm z-travel 2500 mm Control HEIDENHAIN iTNC530 spindle turning speed range 24000 U/min spindle drive 45 kW tool taper HSK A-63 tool change unit 50 Pos. table dimension - longitudinal 9500 mm table dimension - cross 3000 mm coolant IKZ 40 bar c-axis 360 ° headstock swivable +/- 110 ° weight of the machine ca. 84 t This ZIMMERMANN FZ 37-5 is in very good condition and immediately available. Description: ZIMMERMANN FZ 37-5 portal milling machine Year of manufacture: 2014 Control:Heidenhain iTNC 530 X/Y/Z-travel:8,000/3,500/2,500 mm Speed:25,000 rpm Tool holder:HSK 63 Spindle: Technology:Motor spindle Speed:25,000 rpm Power:45 kW Tool holder:HSK 63 NC swivel head: Technology:Fork head, VH 20 A-axis:+/- 110°, 0.001° C-axis:360°, 0.001° Clamping:Hydraulic Work table: Clamping surface:9,500 x 3,000 mm Maximum table load:5,000 kG/m² T-slots:18 H12 Distance:250 mm Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of tool places:50 pieces Tool diameter max.: 125 mm Dobl Sswh E Ezeznvascg Tool length max.:300 mm Equipment / accessories: Position measuring systems:Direct in all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 40 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:BLUM Laser Tjdpowli Tqjfx Aaqjd Set-up mode:Electronic handwheel Translated with (free version)

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min tool taper SK 30 Todpfx Aaexbh E Ujqsd table load max. 100 kg Weight ca. 500 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Tedpfxsw Rl S So Aaqod Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: excellent (used), Year of construction: 2016, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC 530 spindle turning speed range 22000 U/min tool taper HSK A-63 spindle drive 60 kW headstock swivable +/- 110 ° c-axis 360 tool change unit 50 Pos. table dimension - longitudinal 2500 mm table dimension - cross 3250 mm coolant 40 bar weight of the machine ca. 60 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is in very good condition. The machine is immediately available Description: Technical data of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° incl. vibration sensor incl. bearing temperature sensor incl. rotary feed-through for internal KM feed IKZ 5-axis contouring control: Heidenhain iTNC 530/hand wheel HR520, 15" TFT colour display Keller Vario P1 extraction system Machine room roofing Tool changer 50-fold, chain magazine, behind the machine Chip conveyor, ejection 60° left, frontal Renishaw RMP60 measuring probe Blum laser tool measurement "Control NT-Micro" Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged lengthwise 18H12 T-slot spacing 250 mm Dimensions, weights Space requirement (without peripheral devices) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection values Voltage (three-phase current) 400 V Frequency 50 Hz Tjdpfx Ajwlvrmsaqod Fuse see installation plan Power requirement see installation plan Compressed air connection (on-site) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine equipment) Linear axis drives Feed speed X-, Y-, Z-axis 60 m/min Axis acceleration X-, Y-, Z-axis up to 5 m/s² otary axis drives -VH30 Feed rate A-, C-axis 360 °/s Axis acceleration A-, C-axis 700 °/s² Resolution A-, C-axis 0.0001 Accuracy linear axes - according to VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeat accuracy X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of the measuring systems (interpol) A-, C-axis 0.0001° Rotary axis accuracy -VH30 Positioning accuracy A-, C-axis P= 12‘ = 0.0033° Repeat accuracy A-, C-axis Ps= 8’ = 0.0022° Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% ED) 60kW, Spindle speed 22,000 min-1, 95Nm, HSK-A63 Outer dimensions fork head L x W approx. 500 x 600 mm Nominal torque rotary axes control loop A: min. 1200 Nm C: min. 1047 Nm clamped A- and C-axis: 3000 Nm (permanent grease lubrication with automatic relubrication system) Swivelling axis - spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Hydraulic tool clamping Permissible tool weight 4.5 kg (manufacturer's specification) External and internal coolant supply Coolant/lubricant supply (emulsion) at the front of the milling spindle with Belt filter system Volume 1500 l Pump 1: 40l/min at 20 bar Pump 2: 20l/min at 40 bar, Blown air at the front of the spindle

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Tjdpfx Aonzpx Rsaqjd

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm Tsdsw Au H Repfx Aaqsd A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Tedpjwywcisfx Aaqed Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine hours Machine under power: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours of current milling spindle: approx. 150 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Working table Clamping area: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives X/Y/Z axis feed rate: up to 60 m/min X/Y/Z axis acceleration: up to 5 m/s² The machine is currently set to the following default values because there was insufficient power available on site! X/Y axis feed rate: up to 40 m/min Z axis feed rate: up to 30 m/min X/Y/Z axis acceleration: up to 2.5 m/s² Connection data Connected load: 190 kVa Back-up fuse: approx. 315 A The machine can be reset to its original values at any time if sufficient power is available. The following reduced connection values apply: Connected load: 130 kVA Back-up fuse: approx. 250 A Dimensions, weight Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Todpfxowa T Hks Aaqod Enclosure, gantry, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 fluorescent green Description: Additional equipment - Coolant supply with belt filter system - 50-station chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already disassembled and stored.

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Tsdpfx Aasvy A Tnsqod Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH20 Spindle power: 45 kW Spindle speed: max. 25,000 min-1 Torque: 67 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y, Z axes: up to 60 m/min Axis acceleration X, Y, Z axis: up to 5 m/s2 Connection data Connection power: 180 kVa Pre-fuse: approx. 290 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Description: Additional equipment Todpfovy A Tbsx Aaqjd - Coolant supply with belt filter system - 50-way chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Condition of the Machine Fully functional, very good condition. Already dismantled and stored.

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Tedpevwgtyofx Aaqod Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Year of construction: 1998, condition: excellent (used), Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system Tjdpjxlzg Tofx Aaqod - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included Todpfx Aaow Ip Dgoqed The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Tsdpsxlzg Hsfx Aaqed Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Dear customers, we currently offer a used lathe for wood and plastic machining, manufactured by Zimmermann, for sale. Here are some technical details of the machine: Turning length: 1,500 mm Center height over bed: 300 mm Center height over carriage: 160 mm Cross slide travel: 1,500 mm Top slide travel: 260 mm Compound slide travel: 260 mm Main spindle power: 2.2 kW Speed: 375 - 2,700 rpm Dimensions: 2,600 x 900 x 1,200 mm Weight: 650 kg Price plus VAT, which will be itemized separately on the invoice. Tjdpjxl A Thefx Aaqod Shipping available at an additional charge. No warranty and/or guarantee on used machines and accessories. If you have any questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 2003, Disc Sander by FZ Zimmermann This disc sander is specifically designed for model making. Drive motor: 230 Volt, 0.37 kW Selectable left/right rotation, providing optimal use of abrasives Speed approx. 1,400 rpm Disc diameter: 300 mm Planed machine table approx. 400 x 160 mm Cast iron table tiltable 45° up and down Table can be folded forward for easy disc change Optional accessory: mitre gauge with angle guide (sliding fence) Tsdpfx Asxb Eiweaqjd Extraction port: 56 mm Original paint, some areas retouched Operating manual CE certification Includes 20 sanding discs (P60 grit) and one can of disc adhesive Very well-maintained machine from prototype manufacturing for the automotive industry. Dimensions approx. 430 x 440 x 400 mm (L x W x H). Weight approx. 25 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this vendor."

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Grinding table swivels up/down: 30/45° Grinding disc drive motor: 1.5 kW Todsvkdqiepfx Aaqsd Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Dear Customers, We are currently offering a fully refurbished Zimmermann oscillating drum sanding machine, ideal for model and mold making. Below are the technical specifications for type OZS: Table length: 500 mm Table width: 500 mm Table height above floor: 1,050 mm Drum diameter: 20-120 mm Voltage: 400V Power: 1.4 / 1.8 kW Speed: 1,400 / 2,800 rpm Extraction port diameter: 100 mm Equipped with emergency stop Dimensions: 840 x 810 x 1,300 mm Weight: 180 kg The machine has been newly repainted in RAL 7035 light grey. A completely new control cabinet was built and installed, meaning the entire electrical system is brand new. For machine safety, a motor brake and emergency stop system have been integrated. Mechanical components were either sourced from the manufacturer or custom fabricated. Included in the scope of supply are one sanding drum of your choice, sanding sleeves, and other machine-specific accessories. Tjdpfxoxlzize Aaqsd The machine is sold with a 6-month warranty! Price is plus VAT, which will be shown separately on the invoice. Free and insured shipping within Germany! If you have any questions, please feel free to contact us.

Condition: like new (used), Set of six rasps for carpenter's profile sanding machine PS 0 with rasp profile Todpfx Aaow Ni Egeqsd The rasps appear practically as new, see photos. Sold only as a set, no individual sale. The machine can be demonstrated onsite by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering a fully refurbished vertical belt sanding machine for model and mold making by F. Zimmermann. Here are the machine’s technical specifications: Sanding belt width: 250 mm Sanding height: 400 mm Belt length: 2,400 mm Sanding speed: 18 m/s Worktable: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Including angle stop Including sanding belts Foot emergency stop Dimensions: 990 x 850 x 1,740 mm Tedpfx Asxlzgmeaqsd Weight: 470 kg The machine has been painted in RAL 7035 light grey, the sanding plate is completely new, the roller bearings have been replaced, and various other small parts have been exchanged. We have also installed a motor brake and several additional electrical components for enhanced machine safety. The machine comes with a 6-month warranty. Price plus VAT, which will be separately itemized on the invoice. If you have any questions, please feel free to contact us.

Condition: excellent (used), Set of profile sanding rails for Zimmermann profile sanding machine PS 0, or PS 0 with rasp profile Includes one reversible rail each in widths 15, 30, and 40 mm, with one straight side and one side with a radius. The rails appear practically as new, see photos. Also included: 1 box each of P80 sanding belts in widths 15, 30, and 40 mm Sanding belt length: 1985 mm, suitable for Zimmermann PS0 Sale only as a complete set, no individual sales possible. Todsw Nizbjpfx Aaqod The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and available in our warehouse, see "other offers by this supplier."

Condition: refurbished (used), Year of construction: 2025, Dear customers, We are currently offering an oscillating roller sanding machine from Zimmermann, specifically designed for model and mould making. Below are the technical specifications of the machine: Table length: 1,075 mm Table width: 615 mm Table height above floor: 820 mm Roller diameter: 20–250 mm Voltage: 400V Power: 1.4 / 1.8 kW Speed: 1,400 / 2,800 rpm Extraction port diameter: 100 mm Dimensions: 1,450 x 680 x 1,120 mm Todpfx Asxlzd Eeaqjd Weight: 450 kg The machine has been newly painted in RAL 7035 light grey. A completely new control cabinet has been built and installed, i.e. the entire electrical system is brand new. For machine safety, a motor brake and an emergency stop system have been installed. Mechanical parts were either purchased from the manufacturer or custom-made. The scope of delivery includes a roller of your choice as well as sanding sleeves and other machine-specific accessories. This machine is sold with a 6-month warranty! Price plus VAT; VAT will be itemised separately on the invoice. Free insured shipping within Germany! If you have any questions, please feel free to contact us.

Condition: new, Lot of Abrasives for Zimmermann Wide Belt Sander VBZ250 Manufacturer: VAM Vitex KK711X Grits: 15 pcs P40, 10 pcs P60, 10 pcs P80, 10 pcs P120 Total: 45 sanding belts, all in original packaging. Belt dimensions: 250 x 2400 mm, suitable for Zimmermann VBZ250 Sale only as a lot; no single item sale. Tjdpfsw Ngybex Aaqed The machine can be demonstrated at our site by appointment. We only offer machines that are available and ready for demonstration in our warehouse—see also “other offers from this supplier.”

Condition: refurbished (used), Dear customers, currently we offer you deflection rollers as well as drive rollers for profile belt sanding machines of the brand F. Zimmermann. The rollers were newly coated, with a more robust material for better durability, then crowned sanded and newly stored. The rolls fit the following machine types:Zimmermann PS0, year of manufacture independentZimmermann PS1, year of manufacture independentZimmermann PS1/2, year of manufacture independentZimmermann PS S, year of manufacture independentWhen ordering, please always specify the machine type and which rolls you require and in what quantity. We have everything in stock and can deliver at short notice, if you have any further questions please do not hesitate to contact me! Tedpfod S Eb Aox Aaqed

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with extensive accessories Sanding machine with tiltable table and additional equipment for rasping. Ideally suited for model making and mould construction. For precise sanding of contours. All settings are made using clamping levers and fine adjustments. Tjdpew Iqvqsfx Aaqsd Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400 mm Fold-away upper extraction arm for sanding large workpieces. By locking the free-standing profile rail in the upper part of the machine, high angular accuracy can be achieved. Includes three profile reversing rails: 15, 30, and 40 mm (straight and radius) Also includes several sanding belts, see photos Three unused rasps included. Extraction port: 80 mm Waldmann surface-mounted lamp Original paint, partially touched up CE marked Very well-maintained machine from prototyping in the motorsport division of a Wolfsburg-based automobile manufacturer. Apparently has seen little use so far. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “other offers from this seller”.