Roller length stop

MTI RB, LA

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) Dwedpfxshrkrts Agcef 6 pcs. end covers suitable for KBK1 runners

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm Djdpob Nrbnofx Agcjwf height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Condition: new, Ring roller machine with spindle Dodpfxjuudhfo Agcswf

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Dwodpfsg S Ui Aex Agcef

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. Dsdpfx Asg Eglpsgcewf 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: excellent (used), mandrel diameter: 30 mm, Equipment: motor brake, Table milling machine SCM type T130 with four roller feed unit, table size 1200x730mm, max. Speed 10.000/min, spindle D=30mm. Motor 5.5kW A spindle D=40mm can also be supplied at an extra charge. Dodpfx Agst Rfn Eocowf

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany Dedpfeqt Dmyox Agcowf - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available Dwedpfx Agoidlpijcjf • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 4,717 h, load capacity: 2,000 kg, lifting height: 4,700 mm, load center: 500 mm, fuel type: gas, mast type: triplex, power: 38 kW (51.67 HP), motor manufacturer: Toyota, gearing type: hydrostat, DGUV certified until: 12/2024, fork length: 1,200 mm, empty load weight: 3,610 kg, Equipment: CE marking, cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, Toyota Tonero 2t LPG Forklift with Weighing System Ref: 10051 Year of manufacture: 2007 Operating hours: 4,717 h UVV inspection & maintenance: 12/23 at 4,694 h by Toyota Weight: 3,610 kg Length: 3,395 mm Width: 1,155 mm Height: 2,085 mm Load capacity: 2,000 kg Load center: 500 mm Lifting height: 4,700 mm Fork length: 1,200 mm (forks are new) Mast: Triplex with full free lift Fork carriage: Sideshift Engine: Toyota 4Y ECS Engine power: 38 kW Front tires: 21x8-9/6.00 Rear tires: 18x7-8/4.33 Equipment: - Factory-fitted weighing system (digital display) - Multifunction display in the dashboard - Sideshift - Road lighting / work lights - Toyota SAS (System of Active Stability) - Adjustable steering column - Grammer MSG65 seat - Semi-cab with roll-up weather protection on the right - Front and rear windows including wipers Dodpfx Asumk Tlegcowf - Documentation The machine can be demonstrated on site by arrangement. All information without guarantee. Subject to errors and prior sale.

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose Dwjdpfx Agjgwt S Tscsf • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.