CI flexographic printing machine

OFEM Columbus 1008-120

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: Gjdpjyx Uy Aofx Al Uekc • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Gkedpfoiq Hxvox Al Uec Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 259747, Size 516mm, roll-to-roll digital printing machine for labels, etc., Xeikon X800 front end mypress: incl. barcode and trapping software, Hunkeler unwinder, airshaft, ultrasonic webguide sensor, GEW UV dryer, 3 slitting knives, GM rewinder, Corona Plus. Gksdoy Rywwjpfx Al Ujc

Condition: used, Digitale Etikettendruckmaschine SurePress mit Tintenstrahltechnologie / Digital Label Press with Inkjet Technology Digitale Etikettendruckmaschine / Digital Label Press Epson Sure Press L-4033AW Baujahr / Year 2016 - Serial-No. RXH0000088 Maximale Druckauflösung / Maximum Print Resolution: Papier / Paper 720 x 720dpi Film 1440 x 720dpi Rollbedruckstoff Durchmesser max. 100mm Druckgeschwindigkeit / Print Speed: Bis zu 5 m (16') pro Minute bei 720 x 720 dpi (auf Papier) / Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Die Epson SurePress L-4033AW ist eine industrielle Inkjet-Digitaletikettendruckmaschine, die speziell für den Etikettendruck in hoher Qualität konzipiert wurde.  Besonderheit, das weiße Tintenset (AW = Auto White) ermöglicht den Druck auf transparenten Filmen und metallischen Substraten. Gkedpfxeyx Ar Hs Al Uec The Epson digital label press capitalizes on Epson's acclaimed MicroPiezo® ink jet technology to create output with smooth gradations and incredible color quality. The L-4033A has six-color (Cyan, Magenta, Yellow, Black, Orange and Green), industrial-quality, water-based ink set produces a remarkable range of colors for impressive, professional and consistent results.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. Gsdpfjyalqyex Al Uokc multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 Gedpjw Hrrrjfx Al Uskc 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: good (used), Year of construction: 1996, GALLUS Arsoma EM 280-8 Colour Flexo Printing Press Model: EM280 Year of manufacture: 1996 Configuration: • 8 flexo printing units • 8 hot air dryers • GEW UV curing system (1x) • Turn bar (web turning device) • Sheet delivery (stream delivery) • BST Powerscope 4000 web inspection system Technical Data (approx.): • Max. web width: 280 mm • Print width: approx. 260–270 mm • Repeat length: approx. 250 – 520 mm • Unwinder: max. roll diameter approx. 800–1000 mm Gjdpey A Nhiefx Al Uekc • Rewinder: max. roll diameter approx. 800–1000 mm • Mechanical speed: up to approx. 120 m/min • Substrate range: self-adhesive labels, paper, film and flexible packaging materials The machine offers a robust and proven solution for label production, providing high flexibility due to the combination of conventional drying and UV curing systems. This enables the processing of a wide range of materials and applications. A key advantage of this press is the included tooling package, which significantly reduces the need for additional investment and allows for immediate production start-up. Scope of delivery includes: • Printing cylinders • Anilox rollers • Magnetic cylinders This added value ensures high versatility and cost-efficiency for future production needs.

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Gsdorffm Njpfx Al Uekc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Item: D-1746-APV-Baker-N35-15m3 Exchanger APV BAKER PLATE EXCHANGER Gedpjimmb Sofx Al Uekc Stainless Steel Exchanger Pasteur with 2 section, Capacity 2 x 15 m3, working press 6 Bar, 47,9 m2, temperature 120 C,

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into Gsdpfxovwkhne Al Uskc smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitters  Rewinders  Splice table