Clamshell bucket

Palfinger

Condition: new, axle configuration: > 3 axles, first registration: 03/2023, loading space length: 16,160 mm, loading space width: 2,550 mm, loading space height: 3,770 mm, total length: 16,160 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245 / 70 R17.5, wheelbase: 1,410 mm, color: red, Year of construction: 2022, Equipment: tail-lift, Color: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Dcsdpfx Ajuu Hgdegdeb Year: 2022 – New/Unused Weights: King pin load: 18,500 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Max length extended: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm (+100 mm / -100 mm adjustment) Height: 3,755 mm King pin height: 1,300 mm Axles: Axle make: BPW Eco Plus Air suspension 1st axle liftable Axles 1 & 2: rigid Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 dual mounted Load index: 143/141J (146/146F) Additional features: - Radio remote-controlled loading ramps - Hydraulically operated loading ramps - Manual rear supports - Side extensions - Underrun protection - Wheel recesses - Wheel recess covers - 2.0'' king pin - Lashing rings - Stake pockets - Central lubrication - Oversize load marker boards - BPW landing gear - Toolboxes on the gooseneck = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tires; lift axle; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Front axle 2: Twin tires; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functional Tail lift: Goldhofer Extendable chassis: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Financial information Price: On request For further information, please contact Stefan Schaapveld.

Condition: used, Pellet presses Manufacturer: Bühler Model: RPWPR 900.138 EX 4 presses - Bühler 3-4 tons per hour 4 mixers 4 feed screw conveyors Dcodsw Iy T Sspfx Agdsb 20 m long stainless steel chain conveyor 16 m long output conveyor Soft starters

Condition: like new (used), Year of construction: 2008, functionality: fully functional, mobile shredding machine - used- rebuilt - Djdpfsv Dtfvsx Agdocb Arjes 760 D with magnet on wheelaxle Complete conversion to hydraulic drive -- High Performance Shredder -- the most powerful shredder in this size for heavy applications RECONSTRUCTION Machine was completely dismantled and rebuilt by steel construction. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 KW / 477 HP!!! (without AdBlue) - Gearbox: SYNCHRONOUS: 2x125,000NM - Hydraulics: Bosch Rexroth -- 285cbcm pump + 2x 215cbcm hydraulic motors - Control: NEW - Hydraulic lines: NEW - Radio: NEW - Shafts / tools: NEW (Combined tool for wood, garbage, light scrap) Machine is equipped with secondary crusher bars WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Djdpfx Asd H Sc Esgdscb Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Dcodpfx Ajdf Ufpsgdsb Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: excellent (used), Year of construction: 2019, operating hours: 3,631 h, color: green, total height: 3,400 mm, total length: 6,850 mm, total width: 2,860 mm, mobility: mobile, General Information Year of Manufacture: 2019 Applications: Forestry and Land Management Technical Information Power: 441 kW (600 HP) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Dcedpsw Eu Aqjfx Agdsb Drive: Track Unladen weight: 26,700 kg Functional CE marking: yes Condition Technical condition: very good Visual condition: very good

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Dsdpfxsv Dwiro Agdscb

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Dsdpfx Aou D Amgjgdjcb Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder Djdpfewh U Dmex Agdscb • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: used, Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, Processing and dosing system for green waste, wood chips and fuel from biomass consisting of: Dodpfx Agjtynftsdocb - 2 x feed hopper 1,500 x 8,000 mm, with dosing and equalization stages - Drum screening system 2,300 x 7,000 mm, screening drum 15 mm² - Overband magnetic separator Permanent magnet - Disc separator 1,500 x 4,500 mm, separating cut 15-100 mm² - Elevation, steel construction - Conveyor belts, distribution belts - Switch cabinet with control system Manufacturer: Rudnick & Enners Project no.: AF4 167 C Year of construction: 2015 Operating hours: approx. 11,000 h Location: Hesse (Germany) Availability: August 2024, by arrangement Service details: The system is in very good technical condition. Warranty: The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects All prices are ex works, net plus VAT, excluding dismantling, packaging, transportation and crane provision! We reserve the right to prior sale, changes and repairs. This overview is for your information only and does not constitute a binding offer.