Tower crane

Peiner SMK201

Condition: new, Year of construction: 1992, Storage location number: 100581742 Tedps Ahfu Ejfx Afgod Transport dimensions (L x W x H): 0 x 0 x 0 ---- Peiner tower crane SMK201, jib length 22m, hook height 17m, max. load 2000kg, radio remote control, ready for operation.

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader Todpsycvaqsfx Afgod - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: new, Year of construction: 1993, Warehouse number: 100576143 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Peiner crane SMK201, reach 22m, hook height 17m, max. load 2000kg, radio remote control, ready for use, in good condition, TÜV valid until November 2023. Tedozk Aitspfx Afged

Condition: used, Year of construction: 2003, Two-way excavator designed for loosening and removing material, either for stockpiling or loading onto a transport vehicle. The machine is used in the following operations: Tedpfx Afehutkfogsd - on railway and tram tracks - maintenance and trackside work - earthworks and roadworks Manufacturer: ATLAS Model: 1604 KZW Year of manufacture: 2003 Weight: 22,000 kg Dimensions: 5.9x2.5 m, height: 3.0 m Engine power: 90 kW Equipment: - air conditioning - Webasto heater - three-section boom - front and rear hitch - additional hydraulic outlet for a pneumatic hammer - reversing camera - four hydraulic side supports - joystick control Technical condition: used, operational

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, next inspection (TÜV): 10/2025, Year of construction: 2020, operating hours: 900 h, Equipment: UVV, crane, low noise, rubber tracks, tip top condition! Tsdpsvriuvefx Afgod

Year of construction: 2011, condition: ready for operation (used), A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible. Tedpfex I Rrgex Afged

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Tedpfx Afjht Hg Degjd Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: new, Year of construction: 2020, Storage location number: 100285907 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Standard equipment: 1b) Standard version with 27.0 m outreach 2c) Radio remote control 2d) Small control panel 3a) Complete with pyramid-shaped counterweights 7) Collector for continuous rotation 8) MICROMOVE positioning mode Tsdpfx Aezkz Rvjfgjd 9) Cast ballast with 4 x concrete ballast blocks of 910 kg each Location: Regensburg

Condition: used, mileage: 112,000 km, power: 62 kW (84.30 HP), first registration: 11/2014, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, VAT deductible EURO 5 - Facelift Please no emails / no emails Due to time constraints, emails cannot be processed – thank you for your understanding! Further vehicles in stock: !!! Wide selection !!! !!! Regularly changing stock of Volkswagen T5 Transporters !!! VAT deductible Opening hours and further information: Tedevh S Epjpfx Afgsd Viewing and purchase without appointment possible: MON – THU: 9:00 am to 4:00 pm FRI: 9:00 am to 1:00 pm SAT: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch For queries: Christian Hirsch Please try multiple times, as we are often in customer consultations. More offers at ---- More T5 Transporters in stock Prices: Price depends on: - Mileage - Visual condition - Technical condition - TÜV due / New MOT - Service due - New service - 1-seater - 2-seater - 3-seater ---- VAT deductible VAT deductible For questions: Christian Hirsch !!! Emails will not be answered !!! For questions: Christian Hirsch For queries: Christian Hirsch Please try several times, as we are often in customer discussions. ---- Opening hours and further information: Viewing / purchase without appointment possible: MON – THU: 9:00 am to 4:00 pm FRI: 9:00 am to 1:00 pm SAT: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Please no emails / no emails Due to time constraints, emails cannot be processed – thank you for your understanding! ---- More vehicles in stock: VAT deductible For inquiries: Christian Hirsch Special equipment: Cab flooring: rubber, Electric package 1, Tailgate with window, Heated rear window with wiper, High partition wall with fixed window in the cargo area, Multifunction display / on-board computer, Combination instrument with 2 displays, Rear park distance control, Smoker package, Spare wheel with matching tyre, Sliding door, left side (cargo/passenger compartment), Mud flaps front and rear, Upholstery/seat covers: Robust seat covers, Cab seats: lumbar support (driver's seat), Trim panels in the cargo/passenger area: half-height hardboard trim Additional features: Driver/passenger airbags, Outside mirror aspheric (left), Outside mirror convex (right), Assistance system: brake assist (HBA), Vehicle without windows in cargo/passenger area, Vehicle without child lock in cargo/passenger area, Bodywork: van, Body variant: standard roof, Headlight beam adjustment, Truck registration, Engine 2.0 litre – 62 kW TDI, Pollen filter, Wheelbase 3,000 mm, Euro 5 emission standard, H4 headlights, Sliding door right (cargo/passenger compartment), Cab seats: adjustable passenger seat, Cab seats: adjustable driver seat, Seats in cargo/passenger area: first row omitted, Heat-insulating glazing, Permissible total weight 2.80 t ---- More offers at Equipment list determined via VIN inquiry, technical errors may occur Details provided online are non-binding descriptions and do not represent guaranteed characteristics. Seller is not liable for typing or data transmission errors / changes / input errors. Subject to errors and prior sale. Special equipment: Cab flooring: rubber, Ele

Condition: new, Year of construction: 2017, Storage location: 100224623 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Standard equipment: Tjdpfx Aezkz Hwsfgod 1b) Basic version with a 27.0 m outreach 2c) Radio remote control 2d) Small control panel 3a) Complete with pyramids 7) Current collector for continuous rotation 8) MICROMOVE positioning mode 9) Cast ballast with 4 x concrete ballast blocks of 910 kg each Location: Regensburg