Second-hand machinery for sale (200,000)

Condition: not inspected (used), functionality: unexamined, Year of construction: 2008, controller model: HMI PLC KAESER, pressure (max.): 8.5 bar, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Hnedpfsyq Hi Eex Ab Tei Maximum operating pressure: 8.5 bar Air dryer Model: ABT 102 Max. operating pressure: 21 bar MACHINE DETAILS Control model: HMI PLC KAESER Motor power: 55 kW Voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7549

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, plate length: 2,800 mm, plate width: 1,300 mm, TECHNICAL DETAILS Max. panel width: 1,300 mm Max. panel length: 2,800 mm EQUIPMENT 180-degree panel tilting system The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. Hnsdpfjyq E S Sjx Ab Tji External reference: 6327

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Hedpfx Aoyq Ez Tjb Tsni Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Hnjdpjyq Ez Hsfx Ab Toi Max. working height: 45 mm MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6063

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness (edge banding unit): 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Hnsdpfx Ajyqzrneb Tsi Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction beam traverses: 10 Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Glue unit Tool magazine Grooving unit Number of places in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety grid Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8011

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Hjdpfeyqynusx Ab Teni Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7615

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min MACHINE DETAILS Hnedpfx Asyqydceb Tji Control system: Windows XP Machine programming software: OSI FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS Hedpsyqyc Ejfx Ab Toni Main saw blade diameter: 315 mm Maximum tool diameter: 315 mm MACHINE DETAILS Circular saw blade units: 1 Connected load: 4 kW EQUIPMENT Scoring unit Tilting function CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8118

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Hnodpfsyqybujx Ab Tei Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, cylinder diameter: 85 mm, working width: 1,400 mm, number of cylinders: 10, working length: 4,000 mm, TECHNICAL DETAILS Hsdjyqybhepfx Ab Tsni Max. working length: 4,000 mm Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm MACHINE DETAILS Heating system: Oil EQUIPMENT System with pre-feed conveyor belt System with outfeed table Safety standard: CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Hedpjyqx U Hsfx Ab Teni Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Year of construction: 2006, condition: not inspected (used), functionality: unexamined, working width: 1,200 mm, working height: 1,600 mm, working length: 1,200 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 1,200 mm Maximum working length: 1,200 mm Maximum working height: 1,600 mm MACHINE DETAILS Total power: 1.5 kW EQUIPMENT CE marking, safety regulations The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection, and is responsible for the installation, securing, and operational use of the machine at the destination. External reference: 6724 Hnjdpfx Abeyqx Ugj Toi

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Hnedpfjyqx T Aox Ab Toi Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Hedpfjyuxq Aox Ab Teni Plate heat exchanger Lifting pump for chip conveyor

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 Hjdpfx Asyq Avheb Tjni End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 538 mm, turning diameter: 350 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 535 mm, controller model: Mazatrol PC Fusion 640T, Mazak Super Quick Turn with IEMCA TAL/AUTO 65/32 Bar Feeder! The machine operated in single-shift operation with 80% utilization. TECHNICAL DETAILS Turning length: 538 mm Max. turning diameter: 350 mm Max. turning diameter from bar feeder: 70 mm Max. swing diameter: 525 mm X-axis travel: 190 mm Z-axis travel: 535 mm Spindle speed range: 35–5,000 rpm Number of tool stations: 12 Bar Feeder Max. bar length: 3,200 mm Min. bar length: 400 mm Max. bar diameter: 32 mm Min. bar diameter: 5 mm Bar feeder weight: 850 kg MACHINE DETAILS Hnedpfxeytcmxo Ab Toi Control unit: Mazatrol PC Fusion 640T Voltage: 400/230 V 50 Hz Control voltage: 230 V / 24 V Dimensions & Weight Dimensions (L x W x H): approx. 4,000 / 5,700 x 1,800 x 2,000 mm Total weight: approx. 5,000 kg EQUIPMENT Chip conveyor KSF 60/S4 bar chuck IEMCA TAL/AUTO 65/32 bar feeder

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21120H04010, Year of construction: 2017, operating hours: 4,790 h, load capacity: 1,600 kg, lifting height: 5,455 mm, free lift: 1,500 mm, construction height: 2,480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Hodoytqhdjpfx Ab Teni Lift height: 5,455 mm Overall height: 2,480 mm Free lift: 1,500 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Battery capacity: 700 Ah Voltage: 48 V Operating hours: 4,790 h EQUIPMENT Former Linde full-service unit Service + safety inspection (UVV) valid until 03/2027 3rd + 4th hydraulic valve Side shifter Telescopic forks 115-240 cm Roof window Rear-view camera Integrated weighing system All dimensions are approximate. No responsibility is taken for typographical or measurement errors. PICKUP CONDITIONS Loading from the side up to 5 t possible with large forklift on site at own risk. Pickup ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday 7:00-16:30. A mast that is too high for transport can be dismantled on request. If pickup is not made within the deadline, a storage fee of €20 per machine per day applies (must be paid before collection).

Condition: ready for operation (used), functionality: fully functional, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery voltage: 48 V Hnsdpfx Absytpqwo Toi Battery capacity: 625 Ah Battery condition: very good, measured at 51.76 V Battery type: 5PzS625 Dimensions & Weight Dimensions (L x W x H): 83 x 63 x 63 cm Weight: 1,500 kg EQUIPMENT Battery from former Linde service Last service valid until 10/2026 All dimensions are approximate. No liability is accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY upon receipt of email payment confirmation! Collection WITHOUT prior notification Monday to Friday 7:00–16:30. If the mast is too high for transport, it can be removed on request. In case of delayed collection, a storage fee of €20 per machine per day will apply (payment must be made before collection).

Condition: ready for operation (used), functionality: fully functional, battery capacity: 750 Ah, battery voltage: 48 V, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Hsdpfxeytpp Hj Ab Tjni MACHINE DETAILS Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS 750 Measured battery output: 51.23 V Dimensions & Weight Dimensions (L x W x H): 83 cm x 73 cm x 63 cm Weight: 1,000 kg FEATURES Battery from former Still service inventory All dimensions are rounded values. No liability is accepted for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 tons possible on site using a large forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday, 7:00 a.m. – 4:30 p.m. An excessive mast height can be dismantled for transport upon request. If collection is not made within the specified period, a storage fee of €20 per machine per day will be charged (payment due before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 996294, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 830 x 630 x 630 mm Weight: 1,500 kg Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5PzS625 Battery performance: measured at 51.38 V EQUIPMENT Battery from former Linde service All dimensions are rounded figures. No guarantee is given for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site, at buyer’s own risk. Hnodpfx Aeytpn Aeb Tsi Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday, 7:00–16:30. If the mast is too high for transport, removal can be arranged on request. In case of late collection, a storage fee of €20 per machine per day will apply (payment due before pickup).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 053423392, battery capacity: 930 Ah, overall weight: 2,178 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery: 80 V 930 A Nominal energy: 70.7 kWh Hodeytpnpjpfx Ab Tsni Battery condition: very good, measured at 83.39 V Dimensions & Weight Dimensions (L x W x H): 102 x 100 x 80 cm Weight: 2,178 kg EQUIPMENT Battery from a former Linde service unit All measurements are approximations. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT prior notice Monday to Friday 7:00 am–4:30 pm. An overly high mast can be dismantled for transport upon request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).

Condition: ready for operation (used), functionality: fully functional, load capacity: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hnedpfsytpmfsx Ab Toi Load capacity: 1,500 kg EQUIPMENT Comes from Linde full-service equipment Suitable for any forklift with an additional hydraulic valve and a load capacity of 1,000–2,500 kg Note: The forklift shown in the photos and functional video is not included in the scope of delivery! All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION TERMS Loading from the side up to 5 t is possible with a large forklift on site at your own risk. Collection ONLY with an email confirmation of payment! Collection WITHOUT registration Monday to Friday from 7:00 am to 4:30 pm. A mast that is too high can be dismantled for transport upon request. If the item is not collected on time, a storage fee of €20 per machine per day will be charged (payment required before collection).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: CT1133L69106, Year of construction: 2022, operating hours: 382 h, load capacity: 1,500 kg, lifting height: 150 mm, fuel type: electric, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 150 mm Overall height: 1,300 mm MACHINE DETAILS Drive type: Electric Battery: 48 V 20 Ah Operating hours: 382 h EQUIPMENT Former Linde full-service unit All dimensions are approximate values. No liability is accepted for typographical or measurement errors. Hjdpfx Asytpkksb Teni COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT registration Monday to Friday 7:00–16:30. A mast that is too high can be dismantled for transport upon request. If collection is not made within the agreed period, a storage fee of €20 per machine per day applies (additional payment must be made before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 2,880 h, load capacity: 1,400 kg, lifting height: 4,716 mm, free lift: 1,545 mm, mast type: triplex, construction height: 2,065 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,716 mm Overall height: 2,065 mm Free lift: 1,545 mm Hjdpfx Ajytpg Esb Tsni MACHINE DETAILS Mast type: Triplex Battery: 24 V, 375 Ah Battery voltage at measurement: 25.1 V Operating hours: 2,880 h EQUIPMENT Former Linde full-service unit Service + safety inspection (UVV) valid until 03/2027 All dimensions are rounded values. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT appointment: Monday to Friday, 7:00 am – 4:30 pm. A mast that is too high can be dismantled for transport upon request. If collection does not take place within the agreed period, a storage fee of €20 per machine per day will be charged (the fee must be paid prior to pickup).

Condition: repair required (used), functionality: not functional, machine/vehicle number: CT1167J20065, Year of construction: 2018, load capacity: 1,000 kg, lifting height: 150 mm, fuel type: electric, No reserve price – guaranteed sale to the highest bidder! The pallet truck does not start; the battery may be discharged. TECHNICAL DETAILS Load capacity: 1,000 kg Lift height: 150 mm Overall height: 1,950 mm MACHINE DETAILS Drive type: Electric Battery: 24 V / 2 PzS / 200 Ah EQUIPMENT Former Linde full service unit All dimensions are approximate and rounding differences may apply. No liability is accepted for typing or measurement errors. COLLECTION CONDITIONS Hodpfxoytpf Io Ab Teni Side loading up to 5 t possible on site with a large forklift at your own risk. Collection ONLY upon presentation of payment confirmation by email! Collection WITHOUT prior arrangement Monday to Friday, 07:00 to 16:30. An excessively tall mast can be dismantled for transport upon request. In case of delayed collection, a storage fee of €20 per machine per day applies (the fee must be paid before collection).