Minigraver

Sany SY50U

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), fuel type: diesel, color: yellow, overall weight: 5,300 kg, empty load weight: 5,300 kg, operation weight: 5,300 kg, chain condition: 80 %, Year of construction: 2023, operating hours: 86 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Year of manufacture: 2023 Operating hours: approx. 86 Operating weight: approx. 5,300 kg Exceptionally maneuverable. Convincingly efficient. Big performance in a small package. STANDARD EQUIPMENT: Yanmar engine, Stage V, approx. 40 HP, 145 Nm, 2,191 cc Load sensing hydraulics, max. 110 l/min 1st proportional auxiliary control circuit (GRL/hammer) on joystick 1 2nd proportional auxiliary control circuit (grab) on joystick 2 Swing brake 2 travel speeds Fpodpfx Asx Ndcbjfnec Cylinder protection on arm Bucket breakout force ISO 32.5 kN Arm tear-out force ISO 22.9 kN ROPS operator cab Boom 2,700 mm, dipper stick 1,500 mm (L x H x W) 5,390 x 2,630 x 1,960 mm Dozer blade 400 mm rubber tracks Main battery disconnect switch

Condition: used, Year of construction: 2024, operating hours: 315 h, machine/vehicle number: 36373, fuel type: diesel, Empty weight: 3.425 kg Lifting capacity: 250 kg Working height: 2.700 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Fedpfxjvf T Uyj Afnepc Tyre brand: - Max. horizontal reach: 1700 m Transport dimensions (LxWxH): 7.69x2.2x2.98 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Fpodpev Evx Uofx Afnsc Winding protection on the main bearing of the chipper disk. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Condition: good (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,000 h, machine/vehicle number: 42178149, Machine has connection to external power source. Can run on diesel or fully electrical. Very low costs per ton. Screenbox in feeder with adjustable screen. Fsdpfx Aew Rzlzefnepc

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,650 h, load capacity: 4,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,400 mm, power: 107 kW (145.48 HP), fork length: 1,200 mm, empty load weight: 8,400 kg, total length: 5,370 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Load center: 500 Mast type: telescopic Speed class: 40 Technical condition: normal Fedpfx Asxy Atwefnepc Front tire type: pneumatic Front tire size: 460/70 R 24 Front tire condition: 80–100% Rear tire type: pneumatic Rear tire size: 460/70 R 24 Rear tire condition: 80–100% 3rd valve, air conditioning, Compressed air system

Condition: used, Year of construction: 2024, Warranty complete machine 2 yrs 1000Bh Caterpillar wheel loader 908HL basic machine / 908HL-14A deluxe seat (air suspension, steering support and seat heating) DAB+ radio / incl. Bluetooth + M reversible fan and pre-separator Hydraulic / vibration damping forks Fedpforxtbfsx Afnepc

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), gearing type: hydrostat, color: yellow, overall weight: 2,000 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: 2000, Equipment: additional headlights, cabin, GT2000 The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, ideally suited for earthworks, construction, and installation projects. Thanks to its stable construction and precise hydraulic system, it delivers excellent performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel-efficient operation, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient work movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation in various soil conditions. Operating Parameters Fsdeqv E S Rspfx Afnjpc The GT2000 can dig to a maximum depth of 2,050 mm, a vertical depth of 1,955 mm, and has a dumping height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and fast work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, facilitating maneuvering in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing stability. The ground clearance of the dozer blade is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Swing Arm and Cabin The swing arm can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator good visibility and comfort during operation. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Rotation speed: 10–12 rpm Maximum bucket digging force: 14 kN Maximum arm digging force: 10 kN Hydraulic system pressure: 18 MPa Maximum slope angle: 35° Travel drive: Single speed Swing arm: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Maximum vertical digging depth: 1,955 mm Maximum digging range: 3,860 mm Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Dozer blade maximum digging depth: 275 mm Swing arm angle left: 75° Swing arm angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Fpjdpfjfz U S Eox Afnsc Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher Fpjdpfjq Hr Rzex Afnoc - Dosing screws - Elevators - bunkers - Switchgear cabinets

Condition: new, power: 18.4 kW (25.02 HP), fuel type: diesel, color: yellow, overall weight: 3,759 kg, operating hours: 10 h, machine/vehicle number: NEU, Equipment: cabin, Technical data Year of manufacture: New Operating hours: 10 h Engine: Perkins diesel 18.4 kW / 24.6 HP Operating weight: 3,759 kg Dipper arm: 1.60 m Tear-out force: 19.70 kN Breakout force: 32.40 kN Boom swing left/right: 75 / 55 Digging depth: 3.30 m Trenching bucket: 0.30 m Trenching bucket: 0.60 m Fixed grading bucket: 1.20 m Fsdpjxup Scsfx Afnepc Quick coupler system Full cab included Heating included Price on request