Vertical glas washing machine

Schiavo Hydro 3000.6

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking and separating laminated glass. SN GG520A-19388 from 2011. Automatic positioning based on optimisation, automatic blade, 2 independent heating element sections, 20mm trimming, laser device for positioning diagonal cuts. Max cut 3700mm, max speed 100m/min, min 2/2 and max 8/8mm. Included: New felt (5mm) on the unloading table, the 520 LAMe-37 has also been serviced. Bdjdexg Nxyepfx Ab Uea

Condition: new, Year of construction: 2024, total height: 1,800 mm, total width: 1,000 mm, total length: 2,000 mm, Glass storage rack suitable for storing and transporting glass and other sheet goods. Load capacity: 2000Kg Length: 2000mm Width: 1000mm With appropriate inclination angle. The racks are suitable for cranes, with points suitable for connecting a crane on top. With rubber pads to prevent damage to the stored glass or other materials. A forklift space is provided at the bottom. The racks are completely new, have CE certification and a data plate. Discount for larger quantities! Ask about stock! Bdsdpfxsxddche Ab Uea

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 1500 x 3000 mm, Right – Left Year: 1997. 415 V, 50 Hz, 3 Ph. Bodpfx Aexguqneb Uoda In good technical condition. Disassembled and ready for loading.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 10 cup wheels vertical glass edging machine with variable angle 0-45° actual running meters : 260.000 min. glass size : 40 x 40 mm glass thikness : 3 - 55 mm speed : 0,4 - 6 m/min. voltage : 400 V 50 Hz 39 A Bodpfsw U Ddusx Ab Ueda weight : 4600 Kg

Condition: used, Year of construction: 2007, operating hours: 3,900 h, FOR SALE A BEVELING MACHINE IN VERY GOOD CONDITION FROM NEW IN A SMALL GLASS FACTORY. SEE IN WROCŁAW Bjdewb U Rgopfx Ab Ujda

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Bsdpfx Abofg Rlco Ueda Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: good (used), Year of construction: 1993, Load capacity: 1500 kg. Loading height: 1800 mm. Width: 2300 mm. Height: 2200 mm. Depth: 900 mm. Bdodpsx Hqhfsfx Ab Uoa Weight: 140 kg. Condition: good, second-hand

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection Bjdpfxjxnvq Ej Ab Usda © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Bdodomzbr Sopfx Ab Usa Rotation speed (rpm) - max 2800

Condition: used, Year of construction: 2004, functionality: fully functional, Glass thickness: 3 ÷ 40 mm Minimum operating height of sanding belt: 50 mm Minimum size of workpiece: 70x70 mm Installed power: 20 kW Minimum compressed air pressure: 6 bar Max compressed air consumption: 25 Nlt/min Length: 7043 mm Bdedpfx Aoxyv Risb Uja Width: 1890 mm Height: 2300 mm Conveyor load capacity: 200 kg/m Weight: 2800 kg Processing speed: 0.5 ÷ 5 m/min Water tank capacity: 720 l Additional technical data can be provided electronically.