Circuit breaker

Siemens 3RV1021-0GA15

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Podpfx Asulkvdob Tsgu

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, power: 30 kW (40.79 HP), volume flow: 351 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Used Atlas Copco GA30VSD+FF compressor Integrated dryer Integrated frequency converter Pgsdpoxu Ibcsfx Ab Tsu 30 kW 13 bar 5.85 m³/min Year of manufacture: 2014 Operating hours: 43965

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Pjdswgca Topfx Ab Tegu Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Condition: good (used), Year of construction: 2013, Atlas Copco GA7 - 13 VSD Screw Compressor Pgodpfxowk Hcye Ab Tju Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 13.00 bar Motor power: 7.50 kW Free air delivery: 1.26 m³/min

Condition: excellent (used), Year of construction: 2010, ATLAS COPCO GA22FF screw compressor with air dryer after service Technical data: capacity: 3.10 m3/min; 22 KW engine; max pressure 9.5 bar; Pgjdpev Uyxkefx Ab Tou year; 2010 mileage; 8776h!!! 15200 net 18696 gross The compressor is fully functional, ready to work, warranty we provide service.

Condition: used, Year of construction: 2014, operating hours: 34,146 h, Atlas Copco GA15+ Screw Compressor Pjdpfxsybbche Ab Togu For sale is a screw compressor manufactured by Atlas Copco, model GA15+. This compressor is ideal for industrial and commercial applications and is known for its reliability and durability. Technical specifications: Manufacturer: Atlas Copco Model: GA15+ Type: Screw compressor Year of manufacture: 2014 Operating hours: 34,162 h Note: All information is provided to the best of our knowledge, but without warranty. If you are interested or have any further questions, please do not hesitate to contact me.

Condition: new, maximum load weight: 42,900 kg, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 29,000 mm, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. LOADING PLATFORM: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform with double-extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam Pjdoyvnd Nspfx Ab Tegu * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock) * Technical fifth wheel load: 25,000 kg for tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced steered hydro-mechanically, mounted on turntables * Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve * 275/70 R 22.5 3PMSF twin tyres. Brand of our choice * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * At the king pin 1 pair of lashing rings (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets integrated in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket bar mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets integrated in the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings lying in the outer frame of the loading platform, foldable outward * Rear and front steering operable via cable remote control, with single-track axle control, no installation in the tractor unit required * Last axle with air suspension venting activated when the parking brake is applied * Steel front wall, approx. 1,600 mm high, certified according to EN 12642: 2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing gear, wired to the tractor unit connection * Wooden floor approx. 32 mm thick on the gooseneck and loading platform * At the extension tube with large cross-section, one locking position every approx. 500 mm * At the extension tube with small cross-section, one locking position every approx. 1,000 mm, allowing for locking every approx. 500 mm * Cut-outs in the outer frame of the loading platform for hooking lashing straps (LC 2,500 daN) * 4 crosswise stake pocket bars mounted in the loading platform floor, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with automatic lift axle function as well as starting...

Condition: ready for operation (used), functionality: fully functional, Very well-maintained dual-pressure press DL5 from Heuer Hammer. Immediately ready for operation. Podpfx Aoxzft Neb Togu

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: M10L/8556, Offer Number: M10L/8556 Machinetype: boltmaker 4 die 4 blow Pgjdpfx Aswi Uc Ssb Tju Info: bushing cut-off , PKO Make: NEDSCHROEF Type: HPT6 Constr. year: 1968 diameter range: 10-24 mm number of dies: 4 number of stations (incl. cut off): 7 cutting length: 200 mm shaft length under head: 160 mm output - pieces/min: 60 max. thread length: 95 mm max. width acros flats: 32 mm press power: 350 to Location: In our warehouse

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, overall weight: 264 kg, power: 11 kW (14.96 HP), fuel type: electric, operating pressure: 8 bar, pressure (max.): 8 bar, ambient temperature (max.): 40 °C, protection type (IP code): IP65, Equipment: refrigerant dryer, type plate available, Well-maintained screw compressor, Atlas Copco Make: Atlas Copco Model: GA 10 FF (with integrated cooling dryer) Year of manufacture: 1999 Floor-mounted model Control: Elektronikon Maximum operating pressure: 8 bar Motor speed: 3000 rpm Rated power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 264 kg Pgsdpswzidujfx Ab Teu