Thief Strip Palettenraegal SLP depth supports...

SLP

Condition: new, 25-Meter SLP Pallet Racking System With a total length of approximately 25 meters, the 9 bays share a clear bay width of 2,700 mm each. This corresponds exactly to the standard width for storing 3 Euro pallets side by side. Special Racking Depth: The upright depth of 1,100 mm is the standard for Euro pallets in lengthwise storage. By extending the uprights to 1,700 mm and using the deep grid decking (1,700 x 890 mm), this system is perfectly equipped for special dimensions, crosswise storage, or order picking operations. Capacity & Load Capacities: With 6 levels (including the base level), the system offers space for a total of 162 pallets. The maximum bay load of 3,000 kg allows for a high product weight of up to 1,000 kg per pallet. The maximum bay load is 15,000 kg. Technical Data at a Glance: Manufacturer: SLP (Saar-Lager- und Profiltechnik) Type: SL25 Total storage length: approx. 25.15 meters (9 bays at 2,700 mm + upright width) Racking height: 7,150 mm Total racking depth: 1,700 mm (upright depth 1,100 mm + 600 mm upright extension) Clear bay width: 2,700 mm (perfect for 3 Euro pallets per level) Number of bays: 9 bays Number of storage levels: 6 levels (5 beam levels + base level) Total pallet spaces: 162 spaces Max. bay load (per level): 3,000 kg (with evenly distributed load) Max. bay load: 15,000 kg Scope of delivery: 10 x SLP pallet racking upright frame blue 7150 x 1100 mm 10 x SLP pallet racking upright frame blue 7150 x 600 mm 135 x Grid decking 1700 x 890 mm 42 x SLP pallet racking beam orange 2700 mm Your partner for safe storage logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed professionally and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a conversion, or a warehouse liquidation – we take over the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Storage platforms for optimal use of space Racking inspection & inspection according to DIN EN 15635 Safety is a legal requirement. We carry out the annual expert inspection (according to DGUV rule 108-007): Iiodpozrlxmefx Ap Deh - Inspection for deformations and damage. - Check of locking pins and load signs. - Creation of a legally valid test report including a test label. “We offer you a suitable financing solution for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the multi-tier shelving unit: Manufacturer: LPR Type: 600 1x Multi-tier shelving unit, new Material color: blue / orange Overall height including rollers: 2,150 mm Overall width: 1,550 mm Overall depth: 600 mm Number of levels: 3 pcs. Each consisting of: 2x Shelf uprights, new Material color: blue Frame profile dimensions: 50 x 50 mm Iijdpjdb N Hmofx Ap Doh Including cross and diagonal braces, Metal footplates, plastic Cover caps The uprights are pre-assembled (screwed framework) 2,000 mm high 600 mm deep 6x Workbench traverses, new Material color: orange Design: Step traverse Clear width: 1,450 mm Profile dimensions: 80 x 50 mm Shelf load 300 kg with evenly distributed load 12x Locking pins, new To secure the longitudinal beams against unintentional lifting out 3x Shelf inserts, 2nd choice, used Thickness: 22 mm Dimensions: 1,430 x 545 mm 2x Double-stop swivel casters, new 2x Swivel casters, new 8x Machine screws: M8 x 20 mm 8x Nuts: M8 8x Washers: The images are for illustrative purposes of the material. The material color may vary. - The workbenches are supplied unassembled; - The workbench uprights are pre-assembled; - The production time is usually approx. 3 - 5 working days. Our services at a glance: (Prices upon request) - Assembly, installation Our general assembly conditions apply - Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems - Delivery with our own fleet (without unloading)

Condition: good (used), Pallet racking system with chipboard decking according to your needs. Frame height, frame depth, beam length is also according to your requirements. Iiodpfod Duc Tsx Ap Djh Send your enquiry and we plan your system accordingly.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SLP Technical Data for Installation: Number of rack rows: 01 pc. Length per rack row: 14,640 mm Number of bays per rack row: 07 pcs. Number of levels incl. ground level: 02 pcs. Scope of Delivery Includes: 08x pallet rack uprights, used Material color: Sendzimir galvanized Profile dims: C 80 x 50 x 15 x 3.5 mm Incl. horizontal and diagonal braces, base plates Isdpfoxy Ipqox Ap Djih The uprights are pre-assembled (welded lattice framework) Height: 2,310 mm Depth: 1,100 mm 28x pallet rack beams, used Material color: grey INP profile: 100 x 50 mm End connector: 3-hook type Clear span: 2,000 mm 56x locking pins, used Material color: Sendzimir galvanized For securing the beams against unintentional lift-out 32x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Spec: carbon steel, galvanized Approved for: cracked concrete 16x leveling plates, used Spec: fully galvanized For leveling uprights installed on uneven floors 01x load sign with information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Film wrapping machine Rotational speed can be continuously adjusted. Ijded A Udnjpfx Ap Deih Table diameter can be customized according to customer requirements. Manual or automatic unwinding. Various attachments/accessories for the widest range of applications.

Condition: good (used), The scope of delivery includes: 01x U-collision protection corner, used Manufacturer: SLP Material color: yellow/black Total height: 405 mm Iiedsvtbfvspfx Ap Dsh Total width: 230 mm Total depth: 260 mm Opening inside dimension: 160 mm Inside width: 222 mm Inside depth: 168 mm Number of drill holes: 04 pcs. Drill hole Ø: approx. 13 mm Material thickness: 4 mm Weight | piece: 7.77 kg Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical Data for Pallet Rack Beams: Racking System: SLP Scope of Delivery Includes: 01x Pallet Rack Beam, used Colour: grey INP Profile: 100 x 50 mm Bracket: 3 hooks (Agraffe 3 HK) Clear span: 2,000 mm 02x Safety Pin, used Design: fully galvanized For securing the cross beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Iedpfsxyvznex Ap Dsih Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be queried separately depending on the place of delivery and the scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Isdpfx Aovy Aipep Deih Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: good (used), Included in the scope of delivery: 1x bracket for push-through lock, used Material color: Sendzimir galvanized Iodpfeipuggsx Ap Deih Manufacturer: SLP Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/piece: 0.930 kg

Condition: good (used), Technical Data of the Pallet Racking System: Racking System: SLP Technical Data for Assembly: Number of Racking Rows: 01 pc Length per Racking Row: 21,640 mm Number of Bays per Row: 07 pcs Number of Levels incl. Ground Level: 02 pcs Scope of Delivery: 08x Pallet Rack Uprights, used Material finish: Sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (welded lattice construction) Height: 2,310 mm Depth: 1,100 mm 28x Pallet Rack Beams, used Material finish: grey IPE profile: 100 x 55 mm Connector type: 3-hook (agraf) Clear span: 3,000 mm 56x Safety Pins, used Material finish: Sendzimir galvanized For securing the horizontal beams against unintentional lifting 32x Anchor Bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 16x Shim Plates, used Finish: fully galvanized For leveling rack uprights installed on uneven floors 01x Load Sign Stating bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Ijdpfxsxy Hcco Ap Dsih General information regarding the item: This item is available for collection only. Any additional transport or shipping requested for this article will incur extra costs, which can be determined upon request depending on delivery location and scope of supply.

Condition: like new (used), Type: for META Clip boltless shelving units Size: For shelves 30 cm deep Height: 15 cm Finish: Galvanized Price: 30 cm €1/each The 50 cm version has already been sold. A shelf divider or shelf organizer is a practical storage accessory that allows shelving units to be divided into smaller compartments or sections. Isdpfx Apem Dr Txe Deih These elements are primarily used to create order and clarity for various items – such as books, documents, dishes, clothing, or office supplies. Shipping: Please inquire about freight costs by stating your postal code, location, and the desired quantity. Additional services: Planning, shelf assembly/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices as well as prior sale reserved!

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: SLP Installation Specifications: Number of Racking Aisles: 01 pc. Length per Aisle: 15,480 mm Number of Bays per Aisle: 05 pcs. Number of Levels incl. Ground Level: 03 pcs. Scope of Delivery Includes: 06x Pallet Rack Uprights, used Material finish: sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 mm Incl. horizontal and diagonal bracing, base plates Uprights are pre-assembled (welded framework) Height: 5,400 mm Depth: 1,100 mm 30x Pallet Rack Beams, used Material finish: grey IPE profile: 100 x 55 mm Connector: 3 HK (hooks) Clear span: 3,000 mm 60x Safety Pins, used Material finish: sendzimir galvanized For securing beams against unintentional removal 24x Anchor Bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Iiedpexyf Rfofx Ap Dsh Approved for: cracked concrete 12x Shim Plates, used Finish: completely galvanized For leveling upright frames that are installed on uneven floors 01x Load Capacity Sign with details on bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any transport or shipping required beyond this is subject to additional costs, which can be quoted separately depending on delivery location and scope.

Condition: good (used), Technical Data for the Pallet Racking System: Racking system: SLP Technical Data for Assembly: Number of rack rows: 01 pc. Length per rack row: 15,480 mm Number of bays per rack row: 05 pcs. Number of levels plus ground level: 04 pcs. Included in the scope of delivery: 06x pallet rack uprights, used Material finish: Sendzimir galvanized Iedpfx Asxx Tvysp Deih Profile dimensions: C 80 x 50 x 15 x 3.5 Including horizontal and diagonal bracing, footplates The uprights are pre-assembled (welded truss design) Height: 6,870 mm Depth: 1,100 mm 40x pallet rack beams, used Material finish: grey IPE profile: 100 x 55 mm Connector: 3-hook Clear span: 3,000 mm 80x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x anchor bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x leveling plates, used Version: fully galvanized For leveling rack uprights installed on uneven floors 01x load capacity sign With information on bay load and shelf load, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional charges, which can be requested from us depending on the place of delivery and the scope of delivery.

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Engine: 45 kW Capacity: 6.5 m³/min Iodpfxehtq Dvj Ap Deih

Condition: good (used), Technical data for the shelf connector: Shelving system: SLP The scope of delivery includes: 01x shelf connector, used for shelf spacing: 310 mm Total length: 310 mm Cross section: L 25 x 25 mm Material thickness: approx. 3.00 mm Iiedpfx Ajvuxy Top Doh Material color: orange Drill hole diameter: 13 mm Weight: 0.460 kg | piece 04x screws M10 x 35 mm 04x nuts M10 Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.