Boxmaker

Solarco BMC 17 DCP

Condition: like new (used), Year of construction: 2004, COMPLETE PET BOTTLING LINE | 13,000 BPH Speed: 13,000 BPH at 0.5L 12,000 BPH at 1.5L Working hours: approximately 2,500 per year Blower SIPA 2004 Model: SFR12 Number of cavities: 12 Preform tipper. Air recovery Compressor NOT PRESENT Chiller NOT PRESENT Piping NOT PRESENT Included formats: 0.5 L – 1.5 L – 2 L – 0.66 L Air conveyor LANFRANCHI 2002 Saturator ALCIAMPIANTI 2006 Ozone generator PROCOMAC 1997 Filling monoblock PROCOMAC 1997 Rinser with 36 clamps Model: GRIPSTAR Isobaric filler, 48 valves Model: FILLSTAR PET 48.12 Djdpfx Astqfg Hjgcecr Functions: Sanitization De-gassing Capper AROL 12 heads – 2018 Model: TS EURO PK Cap types: Alaska Sport cap Hopper, elevator and unscrambler included Bottle inspector OMRON 2008 Level control Cap presence check Expulsion in case of defects Labeller P.E. 1997 Model: FUTURA 15T Number of heads: 15 Label type: wraparound Type of glue: glue Gluing system Nordson 2010 Conveyor belts PROCOMAC 1997 Shrink wrapper SMI 1997 Model: APET 143/D Type: film launch Packable formats: 3x2 4x3 6x4 Handler SMI 1997 Model: MAB 60 Number of lines: single Double reel magazine Palletizer TMG 1997 Model: SIRIO 2S1C Type: push system Interlayer system Pallet storage Pallet wrapper TOSA 1997 Model: 121 Type: rotating arm Functions: Pre-stretch Top sheet application Machinery has been serviced regularly, about once per year Last maintenance: April 2024

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Dcjdpfx Agoxluukscer

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour Dodew E Iumopfx Agcjcr • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Line consisting of: SIDEL Blower Dcodpfetu Hy Njx Agcsr Model: SBO 16/16 ROUE Number of cavities: 16 Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Dcjdpfx Agoxfvrwecjr Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 Dcedpfx Asv Hm A Tsgcsr - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Dcodporp D Nljfx Agcor Production Capacity Max : 70-100 m/min

Condition: used, Year of construction: 2016, operating hours: 25,046 h, Used Blow Molding Machine KRONES Contiform C312 PRO Year 2016 Introducing the Blow Molding Machine KRONES Contiform C312 Dedpfxsvgu Eie Agcocr The KRONES Contiform C312 PRO blow molding machine, manufactured in 2016, represents the pinnacle in the bottling industry. Crafted by the renowned German company Krones, this model delivers reliable, high-quality performance to meet the most demanding sector requirements. Performance and Capacity of the Machinery Featuring a 12-cavity mold, the Blow Molding Machine KRONES Contiform C312 operates at a maximum speed of 27,000 bottles per hour (bph). This remarkable production speed ensures a steady, efficient flow, thereby optimizing processing times and maximizing productivity. Versatility and Adaptability of the Blow Molding Machine KRONES Contiform C312 Moreover, its ability to adapt to various product types, including square and round shapes, makes the Contiform C312 PRO highly versatile. This feature facilitates a wide range of applications in the bottling industry, offering operational flexibility and production diversification possibilities. Structural Solidity and Durability Weighing 25.0 tons, the machinery is built to withstand the continuous demands of the production environment. Its solid, reliable structure ensures long-lasting performance, consequently minimizing downtime and ensuring uninterrupted production. Efficiency in Material Handling Additionally, equipped with a tilter with a maximum capacity of 2.0 tons, the Blow Molding Machine KRONES Contiform C312 enables high efficiency in material movement and handling. This feature optimizes logistical processes within the company, thereby reducing loading and unloading times and enhancing overall operational efficiency. Advanced Technology and Optimal Performance Furthermore, the 150 kW blowing system ensures excellent material distribution, thereby guaranteeing the formation of perfectly shaped bottles free from defects. Additionally, the machinery is fitted with a 5 kW air conveyor and offers an air flow rate of 14㎥/h at 11°C and 1,100㎥/h, ensuring a constant, reliable flow during the production process. Concluding Remarks on the KRONES Contiform C312 PRO In conclusion, the Blow Molding Machine KRONES Contiform C312 stands out as the ideal choice for those seeking a high-quality used blow molding machine. With its robust construction, reliable performance, and advanced technology, this model offers an efficient and cost-effective solution for the most demanding bottling needs.

Condition: excellent (used), Year of construction: 1992, Clamping force 8,000 kN Opening stroke 1,000 mm Clamping platens 1,620 x 1,525 mm Tie bar diameter 180 mm Screw diameter 105 mm Dcsdpfx Agotucrcocor Special injection weight 3,740 g Machine weight 65 tons

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Type: HM 10000-9200 Control system: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing side Clamping force: 10000 kN Tie bar dimensions h x v: 1120 x 1400 mm Panel size h x v: 1960 x 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm Panel distance max.: 2120 mm Opening stroke: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering of fixed plate D: 315 mm Technical data injection side Screw diameter: 120 mm Stroke volume: 5655 ccm Injection pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing flow: 144 g/s PS Injection flow into the atmosphere: 1144 g/s PS Number of heating zones: 8 Nozzle path: 700 mm Dimensions & weight Machine dimensions LxWxH: 11.6m x 2.9m x 2.5m Total weight: 76500KG Equipment On-screen text German Compact flash drive Hydraulic core pull 4x Dcodpfx Agerdyq Rjcer Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler mold heating 16x