Mixing and Granulating System

SPT SHM-Series

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Bdjdpfjfn Iudox Ab Usa Flow rate vacuum pump: 13 m3/h

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH More technical details you found in the Datasheet. Bodpfofc I Haex Ab Ueda

Condition: new, Year of construction: 2025, Fully automatic capsule filling machine for powder or pellets in capsules of size 000 - 5. Along with the main machine, various additional modules and machine enable a fully automatic filling process. Included: material hopper, capsule hopper, vacuum feeder, capsule feeder, industrial dust collector, capsule polisher, metal detector, collecting hopper (final product). – Specifications: suitable for capsule size: 000 - 5; segment bores: 25; max. speed of the machine in neutral: 140 cycles/minute (corresponding up to 3500 capsules/minute); main machine dimensions: L1555xW1165xH2040 mm; main machine weight: 2200kg. Bdsdpev Nlc Rofx Ab Uea Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 2008, Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible. Bjdpfovcpz Rex Ab Usda

Year of construction: 2025, condition: new, Rotary tablet press for tableting single-layer tablets. Easy punch tool change, quick to clean, low noise operation. Including dust collector, tablet deduster and vacuum feeder. - Specifications: press tool: D; number of punch stations: 15; max. speed of the machine in neutral: 77 cycles/minute (corresponds to approx. 69,000 tablets/hour); max. tablet diameter: 25 mm; max. filling depth: 20 mm; max. precompression force: 12 kN; max. main compression force: 100 kN; product contact parts are made of stainless steel SUS 316L, chassis is made of stainless steel 304; power consumption: 5.5 kW; machine dimensions: 660×690×1620 mm; weight: 675kg. Bedpfx Aov Nl Sfsb Usda Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2026, total width: 1,500 mm, total length: 2,500 mm, total height: 3,200 mm, Rotary tablet press SPT- TP600 2-shift production; Touch screen, PLC control panel; HMI (Human Machine Interface); SPT-TP 600 Number of stations (max.) 16 stations 1 Max. tablet ejection 3000 - 18000 T/h 2 Max. tablet diameter round mm 50 3 Max. Tablet thickness mm 15 Bjdpfxsuac Sfj Ab Uoda 4 Max. Main pressing force t 30 6 Dimensions mm 1500 x 2500 x 3200

Condition: used, Year of construction: 2022, Cartoner including hot melt applicator. This device has a low operating hour count. It is particularly suitable for products that can be fed into the carton from the side. Bedpfx Aovb E Evsb Uoda

Condition: good (used), Year of construction: 2013, VIKING MASEK ST 200 Stickpacker This 2-lane machine has a maximum output of 65 sticks/min and is designed for forming, filling, and sealing stick packs with powder. Bag width: 17 - 40 mm Bag length: 50 - 200 mm Fill volume: 0.2 - 100 ml Max. film roll diameter: 400 mm Bdodpfx Aoxvzaneb Usa Max. film width: 400 mm Manufacturer: Viking Masek Year of manufacture: 2013 Space requirement: 120 x 250 x 260 cm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Our horizontal form, fill and seal machine from the DEAPHS series is specially designed for filling sachets and doypacks sealed on 3 and 4 sides. Thanks to the various dosing systems, such as auger dosing, the volumetric cup filler and the multi-head filler, the machine reliably packs powdery, liquid and granular products. The machine also produces the bags to be filled independently from flat film, making it a cost-effective and efficient packaging solution. The modular design of the form, fill and seal machine means that it can be converted and extended quickly and easily. ✅ Perfectly suited for food, pet food, pharmaceutical products, cosmetics and other non-food products. ✅ Also ideal for filling small product quantities and samples - for example in our mini pouches. ✅ Optional accessories such as volumetric cup filling system, multi-head combination weigher, piston filling device and Hibar pump filler Bdjdpsum R Ezefx Ab Uea ✅ You can also obtain suitable packaging material (pouches & film) from us Independent film unwinding shaft: Ensures good control of film tension, flexible adjustment to film roll width and bag specification possible, better doypack forming. Configuration: -Film unwinding shaft -Bag bottom sealing -Bag bottom former -Three horizontal sealing units -Two vertical sealing units -Servo bag take-off -Mechanical bag cutting -Vacuum bag opening -Photocell control -LCD - Touch display -SPS - Panasonic -Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-Ph, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Bsdju Rc R Sepfx Ab Ueda