Tipper

Stas

Condition: used, maximum load weight: 33,083 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 10/2026, loading space length: 12,680 mm, loading space width: 2,400 mm, loading space height: 2,434 mm, loading space volume: 74 m³, total width: 2,550 mm, total height: 3,810 mm, Year of construction: 2021, Equipment: ABS, STAS 3-axle HardoX steel tipper, 74 m³ First registration 10/2021, from first owner Mileage only 257,882 km Dimensions (L x W x H) 12,680 x 2,330/2,430 x 2,434 mm (tapered design) Unladen weight 8,917 kg Floor made of continuous 5 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Straight front wall, with interior access ladder Rear portal doors 50:50, pneumatic secondary release Reinforced tarpaulin roof HYVA tilting cylinder type Alpha, low pressure 2x pneumatic vibrators Lsdpezgqpgjfx Al Tshh JOST crank-type landing gears, full load capacity SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with RSS anti-rollback system WABCO Smartboard, new model Lifting and lowering device Automatic tilting lowering Tires 6x 385/55 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss Aluminum access ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING; with us, full-service rental is immediately available. -----

Condition: used, maximum load weight: 34,120 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 88 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS Walking Floor Semi-Trailer, 88 cbm First registration 07/2024, from first owner Mileage only 69,324 km Internal dimensions (L x W x H) 13,513 x 2,475 x 2,536 / 2,752 mm Ljdpfey S Nqcex Al Tohh >>> Saddle height 1,200 to 1,250 mm Axle distance 1,310 mm Unladen weight 7,880 kg Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO Trailer EBS with anti-roll system RSS WABCO Smartboard with axle load indicator >>> 1st and 3rd axles are lift axles >>> WABCO OptiTurn steering system to reduce the turning radius Air tank made of aluminum Tire size 6x 385/65 R 22.5 Crank-operated saddle JOST full-load Lighting ASPÖCK full LED 4 x LED work lights Toolbox on the rear left Side walls with profile overlaps, completely welded on the inside CARGOFLOOR sliding floor with 21 planks, material thickness 10 mm, ribbed >>> with floor reinforcement for forklifts and full load, sliding bearings Control with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel Side rails 2 pieces, reinforced waste disposal version Roof tarpaulin, reinforced version >>> Rear crossbar swivels, can be operated from the ground with grain slide in the left door leaf RENTING is the new BUYING, and it is immediately available with us, even in FULL-SERVICE LEASING.

Condition: good (used), axle configuration: 3 axles, first registration: 04/2007, loading space volume: 58 m³, suspension: air, color: blue, Year of construction: 2007, Make axles: Mercedes Lhedpfxozgtcie Al Tjh Empty weight: 6.160 kg Carrying capacity: 32.840 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Lift axle - MB axles - Rear doors - Tarpaulin

Condition: used, axle configuration: 3 axles, first registration: 01/2010, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2010, Axle configuration Tyre size: 385/65 R22.5 Axle make: Mercedes-Benz Brakes: disc brakes Suspension: air suspension Lodpfx Alszgmkyj Tohh Rear axle 1: alloy rims; tyre tread left: 5 mm; tyre tread right: 3 mm Rear axle 2: alloy rims; tyre tread left: 5 mm; tyre tread right: 5 mm Rear axle 3: alloy rims; tyre tread left: 2 mm; tyre tread right: 4 mm Weights Unladen weight: 6,370 kg Payload: 32,630 kg Gross vehicle weight: 39,000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 09/2008, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2008, Axle configuration Ledezgmazspfx Al Tshh Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear axle 2: Aluminum rims; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Rear axle 3: Aluminum rims; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 4,890 kg Payload: 33,110 kg GVW: 38,000 kg Condition Damage: None

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 08/2023, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,740 mm, loading space volume: 90 m³, Year of construction: 2021, Equipment: ABS, ecoSTAR 90 cbm graphite black ECOSTAR FE CHASSIS - V13500 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: 13500 MM Internal width of the body: 2475 MM Internal height of the body: 2650/2740 MM Volume of the body: 90 cbm Saddle height: 1150-1180 MM TECHNICAL DESCRIPTION 1. FRAME SUBFRAME High-quality steel S355JR (= ST52.3) construction. Chassis not painted but galvanized (EN ISO 1461), hot-dip galvanizing. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 tons Suspension: Original SAF air suspension Brakes: large disc - INTEGRAL Offset: ET 120 BVA: with BRAKE WEAR INDICATOR LIFT AXLE FUNCTION The third axle is a trailing steering axle (internal height front/rear 2650/2740 mm) + First axle is a lift axle STARTING ASSISTANCE is activated when a button in the truck is pressed (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. TIRES 6 x 385/65 R 22.5 on steel rims. ET 120. SADDLE BRACKETS JOST module with outrigger pads for air-suspended vehicles. Steering with single-hand operation and 2 speed levels. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-line compressed air brake system according to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets REAR LIGHTING IN THE UNDERBODY PROTECTION. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. WORK LIGHT ON THE FRAME 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control console. EXTRA WORK LIGHT 1 work light (Workpoint LED) on the front wall (INSIDE - right) - with switch in the front. HYDRAULIC SYSTEM Pressure: ? Female. Return line: 1 Female. HYDRAULIC POSITION Connection on the front wall. With additional connection option below the body in front of the support legs. Aluminum ladder (3.7 m) attached to the side impact protection (right). RETRACTABLE LADDER AT THE REAR integrated into the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking, with a 1-piece cover plate (floor cover not possible). TOOLBOX PVC with key (800 x 460 x 430 mm). Rear LEFT POSITION CONTROL CONSOLE + BOX TEM The control console is mounted on the rear left. The box for operating the floor system is also mounted on the rear left. FENDERS 6 plastic single wheel fenders. 2 Clear Pass spray guards are permanently attached to the plastic fenders. Lhedozfdgijpfx Al Toh 2. BIN FRONT WALL The front wall consists of 30 mm thick aluminum plank profiles, type 600, with reinforced corner joints. COVERING INSIDE BETWEEN FLOOR-FRONT WALL Solid seal between the floor and the front wall by means of an aluminum profile and PVC sealing. SIDE WALLS Side walls with smooth design inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. FLOOR SYSTEM CARGO FLOOR CF 500 SL-C E-operation. 21 floor slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. Rear end plate made of aluminum. OPERATION OF THE FLOOR SYSTEM E-operation - Electrical with remote control (original Cargo Floor + multifunctional).

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 04/1982, loading space length: 12,250 mm, loading space width: 2,420 mm, loading space height: 1,050 mm, total length: 12,500 mm, total width: 2,450 mm, total height: 2,450 mm, suspension: steel, tire size: 385/65-R22.5, Year of construction: 1982, = Additional Options and Accessories = - Leaf spring suspension Lhedpfx Aozfaigsl Toh - Drum brakes = Notes = 1982 STAS HEAVY DUTY platform trailer with ROR axles with drum brakes, 7-leaf leaf spring suspension, robust chassis, hardwood floor, 2 heavy-duty tie-down points on the side members, 2 x 3 tie-down points in the center, loading area dimensions: 12.25 x 2.42 m (L x W), front wall height 1.05 m, 3.5-inch kingpin, unladen weight 6,390 kg, permissible total weight: 32,000 kg, tires 385/65-R22.5 (L: 7/7/12 mm; R: 8/13/13 mm), Belgian registration with valid main inspection until 03/14/2027 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: ROR DRUM Brakes: Drum brakes Suspension: Leaf spring suspension Rear axle 1: Max. axle load: 8000 kg; tire tread depth left: 45%; tire tread depth right: 50% Rear axle 2: Max. axle load: 8000 kg; tire tread depth left: 45%; tire tread depth right: 80% Rear axle 3: Max. axle load: 8000 kg; tire tread depth left: 75%; tire tread depth right: 80% Weights Unladen weight: 6,390 kg Payload: 25,610 kg GVWR: 32,000 kg Functional Body brand: STAS 0-3-32-B-ST55 Maintenance, History and Condition APK (Technical Inspection): valid until 04/2027 Technical condition: very good Optical condition: good Additional information Please contact Arne Honingh for further information.

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "X-Shape" First registration 10/2024 Mileage 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous 5 mm HardoX steel HB450 floor Front wall and side walls 4/3 mm HardoX steel HB450 Angled front wall, internal access 2-wing portal doors with pneumatic post-release 1 grain hatch in the right door leaf Reinforced rollover tarp, central locking HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load ALU landing legs 2x air vibrators below body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid WABCO trailer EBS with rollover stability support (RSS) WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminum folding ladder Holder for shovel and broom Lhjdpfsyy Hakjx Al Teh Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available for immediate delivery as FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental----- Lhedpfx Aljxriu Ee Teh

Condition: used, maximum load weight: 34,130 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, condition: like NEW Mileage: 62,270 km Dimensions inside (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (conical design in width) Unladen weight: only 7,820 kg Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4 / 3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing rear portal doors with pneumatic remote unlocking GRAIN SLIDE with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, type Alpha, suitable for high and low pressure Crank landing legs, rated for full load 2x pneumatic vibrators under the body Lhsdoyl Tfvjpfx Al Tsh SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO trailer EBS with RSS roll stability control WABCO Smartboard Automatic tipping lowering system Hydraulic lift and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium wheels Aluminium access ladder Shovel and broom holder Right-hand toolbox 4x LED reverse lights RENTING is the new BUYING – also available from us as a FULL-SERVICE RENTAL, immediately available-----