Stirring & mixing equipment

Symex CML125

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Ibodpfx Acjw Hz T Ejqea

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Schubert Iodpfx Acsk Ttyksqoba TLM-F2 / F44 Packaging system for bottles and folding boxes in cartons with subsequent palletising. Fully automised packing system. Pick a bottle and place in box. Place a box on pallet. Acceptance of bottles and folding boxes - Pre-grouping of bottles or folding boxes - Erecting cartons from flat blanks using hot glue - Filling the pre-grouped products into the erected boxes - Closing the filled boxes with hot glue - Weighing and labeling of the sealed boxes - Palletizing the boxes

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor Ibodpfx Astndpzscqja geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2022, condition: new, 1 x Niro-Tech MB2 boot-washer, brand new: Dimensions – 1260mm wide x 2000mm long x 1080mm high. Electricity – 400v, 50hz. colours. Manufactured in AISI 304 stainless. Isdohq Rd Uopfx Acqeba

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total height: 11,000 mm, total width: 2,350 mm, total length: 11,395 mm, load capacity per storage section: 35 kg, load capacity: 49,560 kg, For SALE 6 pieces!!! KARDEX Vertical Buffer Module LR35® Machine Type: LR-35-19x400x600x11000 Machine height: 11,000 mm Required installation height: 11,050 mm Machine length: 11,395 mm Machine width: 2350 mm Storage segments: 19 pieces Bin width: 400 mm Bin depth: 600 mm Max. load (calculated per Bin): 35 kg Machine surface (without "turntable"): 23.49 m² Isdpfxowqp Npj Acqeba Machine surface (incl. "turntable"): 26.77 m² Permitted total weight: 59,492 kg Permitted total load: 49,560 kg Empty weight (without Bins): 11,415 kg Speed x-axis: max. 3 m/s Speed y-axis: max. 3 m/s Safety intermediate distance: 60 mm Storage grid 25 mm Permitted ambient temperature in operation: +5° - +40° Permitted relative humidity: 85% Year of Build: 2016 Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift (Shuttle systems) & rotating warehouse systems (paternoster systems). See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau TheNetherlands Email: info at deleeuw-machinehandel.nl

Year of construction: 2016, condition: ready for operation (used), Cup diameter: 75mm, max. output: 6000 cups/h, filling capacity: 30-200ml, with outfeed conveyor and take-off turntable, without printer. Iedpfxondn Eue Acqoba

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing, supported by three legs Tank diameter: 2250 mm Heatable/coolable double jacket Isdpohg Nk Djfx Acqjba Enamelled tank

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator Isdpjx Ac Rbsfx Acqjba ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Condition: ready for operation (used), Year of construction: 1995, Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible. Ibodpfx Acjrn Rc Dsqoa

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,550 mm, total width: 2,600 mm, overall weight: 2,500 kg, space requirement height: 2,600 mm, space requirement length: 3,600 mm, space requirement width: 3,000 mm, 300-liter stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitator, jacket, and electrical panels. Motor specifications: 43.19 kW at 50 Hz, 400 V Volume Total capacity 300 L Material Stainless steel Technical specifications Model VAS 300 Year of manufacture 2014 Equipment configuration Agitator Jacket Electrical panels Transport information Length 3550 mm Ijdpfxsv Rr E Ij Acqsba Width 2600 mm Height 2500 mm Weight 2500 kg Manufactured by Glass