Container Handling Gantry Crane

TAKRAF/TEICHMANN

Year of construction: 1987, condition: used, Gantry slewing single level-luffing jib crane constructed for 4-rope grab operation as well as hook operation Capacity grab operation approx. 8,0 to Gtedpjdlazgsfx Ahyew at an outreach of approx. 12,0 up to 25,0 m Capacity in hook operation max. approx. 12,5 t Lifting height above rails with jib approx. 25,0 m max. approx. 22,9 m Span original/actually approx. 6,0/5,2 m Make TAKRAF/TEICHMANN Year of construction/complete overhaul - modernisation 1987/2005 Total weight only approx. 90,0 t Crane equipped with under ridable full-portal, intermediate column to increase the boom pivot point, complete enhousing of the top crane, modernisation with completely new electrics (FU control), cabin, control chair, motor-cabledrum and new painting in 2005 Working speeds: Main hoisting gear actually/optimized approx. 52,0/65,0 m/min Retracting gear approx. 35,0 s Slewing gear approx. 1,2/2,4 rpm Crane travel gear max. approx. 50,0 m/min

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Gtodpfxjqiz N Ro Ahyow Lifting height 9 meters

Year of construction: 1991, condition: refurbished (used), Track gauge currently approx. 42.5 m Gtodomdrxaspfx Ahyow Outreache fixed support usable/total approx. 10.0/16.5 m Lifting height approx. 8.0 m - Two Demag trolleys that can be moved separately and together monorail trolleys - Radio remote control and emergency control

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam Gtedpfxohzbipo Ahyjw - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Year of construction: 2026, condition: new, CM 10. Gjdpfx Aou Dxngehyjtw 750 KG / HOUR CAPACITY. CAPACITY IS GIVEN FOR 4 MM SIEVE. OUR LOCATION KONYA TURKEY BÜSAN SANAYİ. CRUSHER MOTOR: 37.5 KW. TOTAL WEIGHT 2.5 TONS. MAGNETIC DISCHARGE BELT, PLASTIC SPIRAL, DUST CYCLONE. COVERS APPROXIMATELY 20 M2 SPACE.

Condition: used, Year of construction: 1994, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or Godpfxel Su Rxo Ahyjtw *

Condition: used, Year of construction: 2005, functionality: fully functional, 630 kVA transformer station, year of manufacture 2005, Bockenem UK1700-30, 630 kVA oil transformer, 20kV±2x2.5%/400 V, AREVA, DCU3834 with HV plug-in bushings AK, LV Pfisterer terminals. Gedpfsxzq Dtox Ahyetw

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, number of axes: 6, pressing force: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz Gtodpfsx D D Hyox Ahyow • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Lifting height approx. 8,0 m Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: - Double-rail trolley with 4-corner rope outlet - Magnet System prepared Gtjdpfx Ahsqfc Egjyow - Radio remote control - Optionally with magnetic traverse or spreader

Condition: new, Year of construction: 2025, machine/vehicle number: JEWELliner XS30-PRO Std, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Standard" with 30W CW laser power equiped with an electric lift door, an auto-focus function and is builded in a compact machine dimension Gtsdpfx Ahsc Rmy Njyow to fit into most rooms. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Standard" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software "BNMARK5" ! Made in Germany ! developed by BN Laser - optional - rotary axis with removable jewelry jaw chuck Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!