Slitter-Rewinder

Temac EMS 610S

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Nwjdpfet D E Aiox Af Ieb Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: ready for operation (used), Year of construction: 1997, 1997, speed: 500 m/min, Nodpfjxwp Uvex Af Iowb roll dimension: 450 – 1550 mm,

Year of construction: 2022, condition: used, Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Compressed air: 5–40°C Noise level: 82 dB(A) Color: Grey RAL 7035 Materials to be slit: • Paper-/liner-based packaging laminates. Nsdpsxx Tbcefx Af Iewb • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder for lifting parent rolls from the floor. • Two motors driving the unwind roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3") cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6") cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway, enabling web threading at floor level while maintaining full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cutting performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • Separator roller, driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on processed materials). • Pressure is adjustable and synchronized with the winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a linear transverse knife and backing plate for securing the web to new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a central system or container (not included). Rewinding section: • Motorized turret (two-position) with two rewinding shafts. • Rewinding shaft drive via oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, featuring full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips and individual bladders.

Year of construction: 2008, condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Nwodpelvu Rujfx Af Isb

Condition: excellent (used), Offer for COMEXI PROSLIT slitter from 2007 with 1400 mm width. Nsdexf U Auopfx Af Iswb

Condition: used, Year of construction: 2008, Technical data: Working Width: 1300 mm Maximum Speed: 550 m/min Unwinder Type: Shaftless Maximum Unwinder Roll Diameter: 1000 mm Rewinder Type: Double shaft, center-driven Maximum Rewinder Roll Diameter: 650 mm Minimum Slit Width: 35 mm / 25 mm (optional) Processed Materials: PP, PET, LDPE, HDPE, paper, and laminated materials Knife Types: Blade slitter and rotary knives Nsdpsxxmr Uofx Af Iswb Control System: Touchscreen HMI with web monitoring and recipe management Additional Features: • Automatic knife positioning system • Shaftless unwinding with hydraulic tilting arms • Laser core guiding for precise and quick setup • Modular design for easy maintenance and access

Condition: used, Year of construction: 2018, Technical data: Maximum material width: 1350 mm Web guiding system: Optical sensor (control by print mark) Slitting technology: • 8 rotary knives • 8 razor blades Edge trim extraction: fully functional Nsdpfxjxxmuve Af Iswb Knife/blade adjustment: Manual

Condition: excellent (used), Year of construction: 2002, COMEXI solventless laminating machine, year 2002, 1300 mm wide; two Corona VETAPHONE treaters; BST aligners; DOPAG dosing mix; quick sleeve change; touch screen; pneumatic shafts; temperature controllers. Njdpfx Afot Ipate Iowb

Condition: like new (used), Year of construction: 2024, operating hours: 120 h, functionality: fully functional, total length: 4,350 mm, total width: 4,900 mm, total height: 1,880 mm, power: 30 kW (40.79 HP), 1. Main control: Weikoda PLC and human-machine interface, with automatic stop when counting meters, automatic detection of remaining quantity, and automatic speed regulation of line speed. 2.Winding tension: It adopts independent motor and PLC for follow-up control, with pre-tension system. The tension is automatically controlled by servo motor, constant tension and taper tension. 3. Unwinding: Adopt one-piece three/six-inch universal shaftless loading and unloading, hydraulic lifting. 4. Correction system: Adopt domestic famous and high-quality correction device for edge control. 5. Traction: Large diameter precision traction steel roller, surface plasma treatment, dynamic and static balance, roller cylindricality ÿ±0.02mm, runout ÿ0.02. Pressure roller wear-resistant rubber wheel NBR Shore hardness 60~65°. 6. Cutting: The bottom knife is a ÿ105 diameter bottom knife, which adopts automatic knife arrangement, and the upper knife is a ÿ105 circular knife. 7. Low-voltage electrical appliances and pneumatic components: using imported original parts such as AirTac and Schneider. Nwsdpfx Aewd Ig Hef Isb

Condition: ready for operation (used), A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January. Nwedpfx Aexwyvwjf Ieb