Belt curve conveyor belt curve 60 ° right

Transnorm 500 IR600 / TS 1500-100

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 The machine is ready for immediate use! Kodpfx Ameur N Daszslr

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Kljdpfeuz If Nox Amzjr Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Tape dimensions 150 x 2000 mm Belt speed 14.5 / 29 m/sec. Contact disc x W 200 / 155 mm Flat grinding table 460 x 150 mm Suction connection of 100 mm Kljdpfx Ajd Rw Rhomzsr Engine power S1 100% 2.1 / 2.8 kW Motor recording power S6 40% 2.8 / 3.6 kW Voltage 400 V Length 1080 mm Width 520 mm Height 1000 mm Weight approx. 85 kg

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 220287, NS60E Nakashimada double-pressure press from 2022, like new, cutting length 95 mm, wire cutting 7 mm Klodpfx Aowiwqxomzjr

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system EW Menn including vibratory feeder, Skako, and slide conveyor Kodpfx Amowkqvqezjlr

Condition: used, Year of construction: 1997, machine/vehicle number: 707, Ingramatic thread rolling machine RP21 RV, year 97, used Kljdpowiu Afofx Amzer

Condition: used, maximum load weight: 19,880 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 06/2013, loading space length: 11,700 mm, loading space width: 2,500 mm, loading space height: 2,250 mm, loading space volume: 66 m³, total width: 2,660 mm, total height: 3,760 mm, Year of construction: 2013, Equipment: ABS, * Tridec steering * Lift axle * Mercedes Benz axles * Full air suspension * Disc brakes Kodpjxafqrofx Amzjlr * Frigoblock cooling unit * 2,000 kg Dautel tail lift * Tyres 385/65 R 22.5 60-80 %

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Kledjyxccrepfx Amzor - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg