Roller conveyor

unbekannt -

Condition: used, sheet width - max. 170 mm plate thickness 3,4 mm angle steel/side length 50 mm weight of the machine ca. 70 kg Ijdpfx Asv Dxzisb Tstc dimensions of the machine ca. 0,7 x 0,16 x 2,1 m Is cutting flat steel, L-beam, Scorper, round and square material. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Itedpjrypmgjfx Ab Toc Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: ready for operation (used), table length 800 mm Itedpeumndbefx Ab Tec table width 320 mm groove width 20 mm dimensions of the machine ca. 800 x 320 x 250 mm Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m².

Condition: used, plate thickness 4 mm Cutting thickness max. At (60 kg / mm²) 3 mm blade length 90 mm Iedpfxou I Et Rj Ab Tjtc weight ca. 30 kg dimensions of the machine ca. 0,45 x 0,30 x 0,2 m Notching unit for installation under a hydraulic or eccentric press. The cutting thicknesses are estimated to be low. Machine dealer with own stock of 1600 m².

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm Itodsmxkdpjpfx Ab Tjc - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Condition: used, Technical details: voltage: 220 V / Hz revolution per minute: nicht bekannt U/min Itsdsu Ngx Dopfx Ab Toc weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible *

Condition: used, Jaw width: 155 mm jaw height: 55 mm Clamping length (without special jaws): 170 mm Itedpfx Absc R Slqs Tjc Vertical swivel angle: + 90/- 15°. Height horizontal: 200 mm Required space: 650 x 380 mm

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking Isdpfjd Du T Ijx Ab Tstc • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: used, Outer-Ø: 350 mm inner-Ø (passage): 125 mm Itedpfjc Snupox Ab Tjc Overall height: 100 mm

Condition: used, Jaw width: 130 mm Jaw height: 43 mm Clamping length: 100 mm Overall height: 175 mm Itedpfx Abjb Eg Rhe Toc Vertical swivel angle: + 15/- 45

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm Ijdpfog U Uv Rex Ab Tjtc 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, gr. working width: 1020 mm for sheets (steel sheet) up to: 1 mm Ijdpfx Asb Hlyrjb Tjtc space requirement: 1420 x 650 x 1160 mm Weight: 250 kg

Condition: used, Load capacity approx.: 4 t Platform size: 1500 x 3000 mm Platform height: 600 mm Itedpfxsc H Tmts Ab Tec Weight approx.: 600 kg

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Ijdpfjrah S Hsx Ab Tetc Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: used, Jaw width: 150 mm Ijdsb Eg Rcopfx Ab Tstc jaw height: 45 mm clamping length: 130 mm overall height: 185 mm Vertical swivelling: + 20/- 45°.