Hydraulic cylinder

unbekannt Hub 116 mm

Condition: good (used), linear drive, linear gear, lifting gear, spindle drive -Linear drive: heavy duty, from an edge banding machine Cedpfxsvwkyke Abnjpt -Shaft: Ø 100 mm -Stroke: 116 mm / 6 mm/rev. -Quantity: 4 pieces available -Price:per piece -Dimensions: 775/180/H325 mm -Weight: 72 kg/piece

Condition: used, Year of construction: 1975, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 65 - 1750 U/min table-size 425 x 500 mm column diameter 155 mm feed 0.1-0.2-0.3 m/min spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Machine from a vocational school good / well-maintained condition (!!) Equipment: - robust motor-driven pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed Cjdpfx Absxabuajnjpt - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank - 1x used machine vice - machined base plate - coolant device - connection cable + connection plug - original operating instructions

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Cpodpfx Aod I A Auebnot Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: used, For Sale: Commercial Property (20 x 25 x 6.5 m) – Dismantling Mid-January Are you looking for a robust, multi-purpose commercial building for reuse or installation at your own site? This is your opportunity! Dimensions: - Width: 20 meters - Length: 25 meters Codpex A Aflofx Abnjpt - Height: 6.5 meters Included: - Sandwich panels - Steel deck sheets - Window frames - Office space The building is fully demountable and will be carefully dismantled in mid-January. Ideal for reconstruction or as a source of materials for your own project. Sale Price: On request Interested or need more information? Contact us for details, photos, or to arrange a viewing before dismantling.

Condition: new, Year of construction: 2025, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply Cpsdpfx Abjvxth Hsnst 400V Weight 360 kg

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min Cpsdpov A S Efsfx Abnet feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: used, Universal Milling Machine DUFOUR 223 Travel X: 700 mm Travel Y: 250 mm Travel Z: 400 mm Codsxxa Ehepfx Abnspt Cone SA40 Spindle speed: from 24 to 1500 RPM Table size: 1150 x 325 mm Horizontal + Vertical Swivel Head Scale: 3 axes ELESTA Auto Feeds X - Y - Z Lubricant pump Voltage: 380 V Width: 1800 mm Depth: 2300 mm Total height: 2100 mm Weight: approx 2 T

Condition: new, Face milling cutter (28465) Make Widia Face Mill M 640,Type 125 B 12 RS 60 HP 06D Diameter 125 mm 12 cutting edges Cpsdpforwfpxjx Abnst new and unused in opened packaging

Condition: ready for operation (used), Travel X/Y/Z: 800mm/400mm/440mm, table dimensions X/Y: 1285mm/355mm, quill stroke: 130mm, weight: approx. 2100kg. An on-site inspection is possible. Csdpfx Ajx Hz Rwebnspt

Condition: good (used), Year of construction: 2017, functionality: fully functional, total length: 147 mm, total width: 85 mm, total height: 85 mm, mount diameter: 40 mm, throat depth: 84 mm, torque: 50 Nm, rotational speed (max.): 6,000 rpm, coolant supply: 25 bar, Driven tool for CNC lathes, straight units, with VDI 40 or Varia X4 interface, including the depicted thread tapping head from manufacturer EWS, is no longer needed as the machine has been sold. The driven tool including the thread tapping head costs over 2,000 euros new. This is being sold complete as shown for 950 euros. Cjdpjxyczbsfx Abnopt