Electric low-lift truck

Unicarriers PLL180

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Bcedpfx Agstyyn Hjzst

Condition: new, LIFTING EQUIPMENT FROM 5 - 10t WEIGHT Bjdpfxsi Akpdj Agzjct TRANSPORT TROLLEYS FROM 5 - 30t WEIGHT A LOT OF VARIETY NEW IN STOCK

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Bcsdpfx Asghgq Nogzot Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: like new (used), Year of construction: 2007, operating hours: 58,263 h, functionality: fully functional, machine/vehicle number: 203130, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, Equipment: documentation/manual, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 203130 Year of Manufacture: 2007 Operating Hours: 58,263 h Dimensions: L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Fully functional Condition very well maintained Extras Handling interface Thermoplastic screw/barrel 25 mm, highly wear-resistant Selogica control system Injection unit Screw diameter 25 mm Injection weight 54 g/hp Injection pressure 2500 bar Injection volume 59 cc Clamping unit Clamping force 50 t/500 kN Tiebar spacing 320 x 320 mm Bsdjv U Tl Depfx Agzect Clamping platens 446 x 446 mm Mold installation height 200 mm Maximum spacing between platens 550 mm Ejector stroke/force 125 mm/30 kN Clamping unit hydraulic Motor power 11 KW Heating power 9.4 KW Total power 21 KW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - we are NOT an agent dealing with third-party property. - All machines offered come from successful companies for which maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: good (used), Year of construction: 2008, Parts shown by hand not included. 12.000 rpm X 610 mm Y 420 mm Z 450 mm Bcodpjuc Tpgjfx Agzst

Condition: ready for operation (used), Forklift truck Manufacturer: Jumbo Type: J60 DC12 Diesel Year of manufacture 1994 Payload: 6,000 kg Own weight: 9,260 kg Bsdpfx Ajvtwuaogzjct Lifting height: 4300 mm approx. 25,000 operating hours Sold due to switching to wheel loader All service and lubrication intervals verifiably completed according to the inspection book! All filters (hydraulic, fuel, converter, air) replaced annually. Engine oil filter including oil every 250 operating hours. Only B0 was used as diesel fuel. (no B7) immediately available - fully functional Location: Austria, near St. Pölten

Condition: ready for operation (used), Year of construction: 2004, Two injection blow molding machines for hollow body production are available. 1) Injection blow molding machine Kautex KB 15.10, year of manufacture: 1984, overhaul: 2005, stations: 1, nozzle diameter: 80mm, clamping force: approx. 250kN, opening stroke: 300mm/800mm, max. mold thickness: 2x160mm, max. mold dimensions X/Y: 950mm/600mm, control: Siemens S7, operating hours: approx. 96432h. 2) Injection blow molding machine Kautex KB 50/13-S, year of manufacture: 1983, overhaul: 2003, nozzle diameter: approx. 80mm, clamping force: approx. 410kN, plate dimensions X/Y: 700mm/900mm, mold thickness: 2x320mm, opening stroke: 600mm/1300mm, control: Siemens S7. Documentation available. On-site inspection is possible. Bsdpfxjwligwj Agzoct

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm Bcsdpfewftdmox Agzst - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, workpiece diameter (max.): 32 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 30,000 rpm, overall weight: 1,700 kg, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, WILLEMIN MACODEL W408 MT TECHNICAL CHARACTERISTICS : Year : 2007 CNC control : FANUC 16i-MB Number of axes : 5 Stroke X axis : 250 [mm] Stroke Y axis : 200 [mm] Stroke Z axis : 300 [mm] Traversing feeds X, Y and Z axes : 30000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 6000 [rpm] Main spindle max. power : 3.7 [kW] Angular C axis stroke : 360 [°] B axis swivelling stroke : 115 [°] Spindle type : HSK-E40 Min. spindle speed : 500 [rpm] Max. spindle speed : 30000 [rpm] Spindle power : 10 [kW] Tool changer magazin number of stations : 48 Max. tool lenght : 95 [mm] Max. tool diameter : 63 [mm] Lubrication tank capacity : 80 [l] Collant pump flow rate : 40 [l/min] Rated current : 25 [A] Supply voltage : 400 [V] Weight : 1700 [Kg] EQUIPMENT INCLUDED : x1 0-90° pivoting backworking unit (6th side machining) x1 backworking vice x1 RENISHAW TS27R tool probe x1 RENISHAW NC4 TX laser system for tool setting and tool breakage detection x68 type F35 turning collets x9 HSK-40E milling/turning attachments x1 IEMCA BOSS 332 E bar feeder x1 spindle chiller x1 cutting fluid chiller x1 ELBARON mist extractor x1 3-colour status lamp x1 CO2 automatic fire extinguishing system (to be checked by the purchaser with a competent body) x1 set of technical manuals Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. HERMLE , DMU , monoblock , variaxis , chiron Bcedpfjwu Ruhjx Agzet

Condition: used, Year of construction: 2000, operating hours: 144,381 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an injection molding machine of the Arburg brand and type 520 C 2000-675 Technical data Year of construction: 2000 Clamping force: 2000 kN Operating hours: 144,381 Bjdpfou Uuaksx Agzoct Pump motor power: 30 kW On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website