Stationary scissor lift table

Unicraft SHT1001U

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Bedpjmhhypsfx Aknoln Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, pressing force: 30 t, stroke length: 400 mm, working width: 720 mm, - Capacity 30 tons - Cylinder stroke 400 mm - Working width 720 mm - Electrically or manually operated - Manometer - Emergency stop - 400V Blodpfxjr Axzne Aknsn

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used! Bjdpfx Ajnwmwvsknsln

Condition: used, Travel path of the axles: X: 300 mm Y: 350 mm Bodoq Awhfjpfx Akneln Z: 200 mm Weight: approx. 800 kg

Year of construction: 1977, condition: used, machine/vehicle number: 74 362, Load capacity: 500 kg Bjdsb Nwfgopfx Aknoln Table size: 600 x 600 mm Minimum height above floor: 600 mm Lifting height, hydraulically foot-operated: 720 mm Maximum height above floor: 1320 mm Weight: 105 kg

Condition: good (used), bore capacity in steel (diameter) 32 mm throat 310 mm bore stroke 175 mm spindle taper MT MK3 table-size 570 x 475 mm spindle turning speed - stepless 60 - 1600 U/min voltage 400 V column diameter Ø145 mm quill feed 0,1-0,16-0,25 mm/U total power requirement 1,1/1,8 kW Bljdpfx Akey Aytienjn weight of the machine ca. 450 kg dimensions of the machine ca. 0,70 x 1,10 x 2,10 m - Serial-No.: 121950 - Stepless speed control - Automatic vertical feed - Built-in machine light

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 180 mm turning speeds 55-1450 U/min Bedpfeyqvlcex Aknoln Feed 0,1-0,3 mm/U machine. Nummer 5112 table surface area 620x470 mm spindle taper metric 4 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag and so on Bjdpfxeu Ni Rpo Akneln 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: used, mileage: 91,473 km, power: 62 kW (84.30 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI, model year 2011, delivers a solid output of 62 kW (84 hp) from a 1,968 cc diesel engine. With a combined fuel consumption of 7.2 l/100 km and compliance with Euro 5 emissions standards, this van is both environmentally friendly and economical to operate. Its dimensions are 4,892 mm in length, 1,904 mm in width, and 1,970 mm in height, with a wheelbase of 3,000 mm. The permissible gross vehicle weight is 2,800 kg. The vehicle features a 5-speed manual transmission and offers seating for 3 occupants. Equipped with two sliding doors, it facilitates easy loading and unloading. With commercial vehicle registration and a green emissions sticker, it is ideal for professional use. The van is finished in an inviting "Ginstergelb" yellow. This model is a used vehicle with a mileage of 91,473 km and has had one previous owner. It offers practical loading solutions and, upon request, can be delivered anywhere within Germany for an additional fee. On-site inspection is possible without prior appointment. Sale only to businesses (agricultural operations, freelancers, small and large enterprises) or for export. Subject to prior sale and error. Blodpfx Akex Nzr Tonen

Year of construction: 1990, condition: used, Scissor lift table, scissor lift table, scissor lift table, scissor lift, scissor lift, double scissor lift table Bledsdzxkxopfx Aknen -Drive for lifting via: 240 volt electric hydraulic pump -Payload: 400 kg -Platform: 700 x 600 mm -Height retracted: 330 mm (without wheels 210 mm) -Height extended: 1140 mm -Max. Stroke: 810 mm -Number: 1x lifting platforms available -Price: per piece -Transport dimensions: 800/600/H330 mm -Own weight: 128 kg