Oven

Vötsch NTU 60/60

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories Podpfxsnzpx Rj Afijpt -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: ready for operation (used), Year of construction: 2015, - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm Psdpoxqtx Sefx Afispt ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Pedpfx Afjtr Dinjiept 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Podpfxoiknv Eo Afiept

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg Ppedpsz H Dysfx Afiet

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, immediately available - according to DIN EN 1539 for solvent-based substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also available as fixed connection (fuse protection 35 or 50 A required) Ppjdpfeiq Uv Nsx Afiot - incl. 1 piece mesh shelf - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Oven, ovens, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heat oven, drying oven, conditioning oven, paint dryer, solvent oven

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Pjdpfxopbvqvo Afiopt Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine type PMS 11-4 G3 in 3-phase DC version - Specifically designed for welding aluminum sheets - Low usage, completely checked and cleaned - Fully functional, ready for demonstration - Rated voltage 400V/50Hz - Rated power 96 kVA - Welding current 23 kA - Connection cable cross-section 10 mm²/phase - Fuse protection 63A Ppedsh N Sc Eepfx Afiet - Throat depth 1050 mm (!!) - Electrode arm diameter 60 mm - Electrode holder diameter 30 mm - Electrode force 600 daN - Stroke 65+25 mm - Electrode taper MK2 - MPS 8043/1 control unit from Harms & Wende with current rise and pulse function – operating manual included - 2-stage foot switch according to regulations (UVV) - Main machine switch - Pneumatic service unit - Weight approx. 830 kg - Complete documentation available: wiring diagram, compressed air diagram, and cooling-water circuit - VAT deductible - Delivery ex stock Dresden approx. 4 days within Germany – export may take longer! On-site commissioning available for a fee, billing based on actual effort. The unit is located in Dresden, near the A17 motorway, and can be inspected and demonstrated by appointment.

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system - Negotiable !!! - Electrical data 100-240V 50-60Hz - Powder absorption up to 200g / min - Air consumption up to 250L / min at 6 bar - Air quality / vapor less than 1.3 g / nm3 - Air quality / oil less than 0.1 mg / nm3 Powder coating gun data - Output voltage 100 kV - max. output current 100 µA - Length of hose 6 m - antistatic hose - Polarization Negative - Conformity ATEX 2mJ Description of hose - Applicator for quick color changes directly from the box - Intuitive 7" touch display - Automatic cleaning function - gun rinsing - Up to 20 user-defined programs - 3 automatic programs - Remote control of the paint quantity and program change from the handpiece -- Equipment - Controller of the PSS series - ProfiJector RI-1 blunt powder injector - ProfiGun powder gun with quick coupling and remote control - One set of hoses - Stand with vibrator and suction unit with fluidization PSS driver - 7-inch touch panel that can be operated with a glove - 3 automatic programs (overpainting, hard-to-reach surfaces, flat surfaces) - Graduation in 0.1kV and 0.1uA steps - Advanced pneumatic valves for air dose control (romer - patent pending) - The actual air flow measurement reacts to errors such as pressure loss or blockage of the system - Advanced diagnostic tools - Ability to name programs - Ability to control external master controllers with ModBus protocol (A-Series) Ppodpfx Afog U I Ugoiot ProfiGun PM-1 gun - A lightweight ergonomic gun, perfectly balanced with a contoured handle - The ceramic cascade with a voltage of up to 100,000V efficiently loads all types of powders - The new generation of nozzles ensures perfect powder penetration into complex shapes - The profiled nut provides a good grip - The conductive handle with high carbon content provides excellent grounding for the painter - The spray gun is made of special materials with increased impact resistance - Fully demountable design with replaceable powder path tube - The spray gun is patented in the USA and the EU - Cascade polarity - negative ProfiJector powder coating pump Description of the pump - Design of a new efficient injector - The most effective feed angle proven by research - Saves paint and air compared to right angle injectors - It is characterized by relatively low operating costs compared to other pumps - The injector is covered by a European patent

Condition: new, Type DTW-60A Horizontal three axis Ppsdpfx Ajd Tqt Nefijt Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m