Mobile crane

VALLA 20E

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Cjdpfx Aeyldxmektjri Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm Csdpfx Akstqqrfetori total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: new, – Semi-automatic – Hydraulic – 2 speeds – Double miter – Hydraulically adjustable saw pressure Codpjh Razfofx Aktjri – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot pedal control – Emergency stop – Documentation – 400 V

Condition: new, fuel type: electric, color: red, operation weight: 4,700 kg, The brochure with the required information is attached. Credpfxjw H Iyxo Aktoi For more information, please contact our sales team:

Year of construction: 2019, operating hours: 5,500 h, condition: excellent (used), functionality: fully functional, The equipment must be removed by May 26, 2023 – a bid obligates the bidder to dismantle and remove the equipment within the specified timeframe. TECHNICAL DETAILS: Maximum workpiece size: 1050 x 820 x 300 mm Maximum workpiece weight: 1,000 kg Travel distances: 600 x 400 mm Wire diameter: 0.1 – 0.3 mm Machine weight: 3,000 kg Control system: Fanuc 31i –WB Cedpfjk H D Hajx Aktori Footprint: 2,440 x 2,680 mm Machine hours: 5,500 operating hours

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4ROLL DUAL PREPINCH, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 430 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness brass (max.): 50 mm, overall weight: 35,000 kg, total length: 6,100 mm, total width: 2,225 mm, total height: 2,700 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 7, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 3000 X 40 MM brand OMCCA YEAR 2009 DOUBLE INITIAL PINCH Machine used in working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 30 mm Rolls dimensions: -Useful length 3050 mm Cedpfx Aoz Rw R Djktsri -central rolls upper/lower D 470 mm -side rolls left/right D 430 mm One extra smaller upper roll D=350mm fast interchangeable • Hardening of the rolls high strength surface • All 4 rolls driven hydraulic powered rollers rotation • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate being formed • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and digital readout 3 axis. • Digital readouts of the rolls position and top support • Power electric 50 Hp voltage 3-phase 400 /50 • Dimension 6100 x2225 x H 2700 mm - weight 35000kgs Additional tooling with the machine Top central support motorized to hold in place the formed plate up to diameter 3500 mm Side support hydraulic dual articulation

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Cedpfx Aoxwmacekteri Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: good (used), Year of construction: 2009, functionality: fully functional, Table size: 600 x 400 mm Maximum workpiece size: 900 x 600 x 330 mm Maximum workpiece weight: 750 kg X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Generator output: 60 A Machine dimensions: 2190 x 1880 x 2360 mm Machine weight: 2800 kg Accessories: - Magnetic table and EROWA clamping system - Machine manual and operating instructions The machine is in very good condition and comes from a small family business that recently closed down. Cedpfjyity Uex Aktsri

Condition: used, Equipment: soot filter, - Particle filter - Air conditioning - 3 buckets - Oilquick quick-coupler system - 11,850 operating hours Cjdpfezl Nyzjx Aktori

Condition: new, ZEATZ PHL Rotary Tables – for workpieces up to 150 tons The ZEATZ PHL linear series combines highly precise rotary table technology with an integrated linear axis. It enables flexible machining solutions for large and heavy workpieces – from precise positioning to simultaneous rotary and interpolation machining. Your advantages: ✔ Integration into machines with HEIDENHAIN or SIEMENS controls ✔ Service and spare parts supply directly through JMT in Germany ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical specifications: Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (round clamping surfaces also possible) Maximum workpiece weight: approx. 6,000 to 150,000 kg Linear axis: Crjdjm Tv Azjpfx Aktsi Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 angular seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controls Contact us – we will be happy to advise you and prepare an individual offer.