Wheel loader Yard loader

Volvo L35B-Z/S

Condition: used, machine/vehicle number: 2020110210, mileage: 92,300 km, power: 100 kW (135.96 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 3,065 kg, maximum load weight: 435 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized lightweight box bodies on new or used low-frame chassis in various body lengths. The body and interior are always customized to your individual needs, from function to design. We produce ourselves and in Germany. Our many years of experience and our wide-ranging service offer you a great deal of flexibility in the implementation of your idea. Every project has its own ID. VW Crafter 2.0l 2011 Euro5 3500Kg First registration 21.12.2011 Mileage 92.300 km Fuel Diesel kW/hp 100/136 Manual gearbox 6 gear ccm 1,968 cm³ Nsdpfx Aof D Rdtjg Iewc Sales body is NEW, unused and with a large sales hatch across the entire width of the vehicle, 2-seater, driving license class B, rear running board, LED lights, reversing camera. Box body made of 25 mm GRP sandwich element Superlight with alcove. Rear door single-leaf 700 x 0 mm. Floor made of non-slip industrial floor panel R11. Exterior LED lighting in accordance with road traffic regulations and EU regulations. Interior dimensions WD 3800 x 2250 x 2300 mm Side flap WxH 3570 x 1480 mm Permissible total weight 3,500 kg Unladen weight 3,065 kg Interior is NEW!!! Left side: Commercial refrigerator with glass door, convection cooling Underframe for table-top appliances with sliding door, gas hob-2 burners 8.5 kW gas griddle plate Glatt 8 kW gas double deep fryer 2 x 8L 12.5 kW electric bain marie 2 kW wall-mounted hood 2200 incl. extraction, grease drain tap, flame protection filter, heat protection wall and lighting Gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas pipe and gas test certificate Right-hand side: Serving table with sliding doors and stainless steel worktop 900 serving station with hinged lid 254L double sink with shelf incl. fresh and waste water tank, boiler Chalkboard with wooden frame LED illuminated Further equipment: Shelf above the sales hatch, folding bag shelf at the sales opening. 2 LED panels on the ceiling and 3 dimmable LED spotlights above the sales counter. Plenty of storage space. Standard electrical installation 380 volt/16A, power socket in accordance with CEE standard, RCD, 16 ampere fuse with acceptance, 5 double sockets, hygiene package, fire protection package. Net price ¤ 63,920.00 plus 19% VAT Subject to errors and prior sale.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Nwjdpfoxp Ibxjx Ag Isc Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill Nwsdpfx Aevr Eh Eog Ioc • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Nsdpfsgd Uifox Ag Ijwc Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: ready for operation (used), power: 99.29 kW (135.00 HP), Year of construction: 2008, Vehicle description Wheel loader HYUNDAI HL740-7 Year of manufacture 2008 according to counter 15,752 hours Nwjdpfov Eap Dex Ag Isc approx. 12 tons 135 HP - incl. high-tipping bucket - Volvo quick coupler (without hydraulic cylinder) - additional circuit up to fork carriage - cabin with heating and air conditioning - original paint Sales price: 23,900.00 net Cheap delivery also possible! New pallet fork in stock for an additional payment!

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Nwodpfxjrah Evs Ag Ijc Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Year of construction: 1990, condition: good (used), Sideloader used Kalmar, unit was well maintained Rest see pictures Nsdpfx Agjh Et E No Iewc

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Nodpjfx Ibnsfx Ag Iowc MDV 2000 Characteristics: Max wheel diameter: 2000 mm Min wheel diameter: 50 mm Max module: 12 Min module: 3

Condition: good (used), power: 115 kW (156.36 HP), fuel type: diesel, first registration: 04/2016, Year of construction: 2016, operating hours: 9,235 h, Equipment: air conditioning, cabin, = Additional options and accessories = - Central lubrication = Remarks = HYUNDAI ROBEX 160W-9A WHEELED EXCAVATOR, WITH BUCKET, CENTRAL LUBRICATION, CAMERA, QUICK COUPLER, EXTRA HYDRAULIC LINES, TRIPLE BOOM, AIR CONDITIONING, BELGIUM REGISTRATION, MACHINE IS IN EXCELLENT CONDITION, Nsdpfx Agoyfuqas Iswc READY FOR WORK, MORE INFORMATION UPON REQUEST = Further information = Drive: Wheel Number of cylinders: 6 Unladen weight: 16,700 kg CE marking: yes Technical condition: good Visual condition: good Contact Gerrit Haverhoek or Piet Haverhoek for more information.

Condition: used, Year of construction: 2002, operating hours: 7,636 h, MAKE: NEW HOLLAND TYPE: LB95-4PT YEAR: 2002 CE: YES WORKING HOURS: 7636 TYRES/UNDERCARRIAGE: 30% POWER: 63KW ENGINE: WEIGHT: 8430KG OPTIONS: QUICK COUPLER FRONT BUCKET 2 REAR BUCKETS TELESCOPIC ARM AIR CONDITIONING EXTRA FUNCTIONS Nedpsx Itklsfx Ag Iewc 4x4 READY FOR WORK