Tensile / Compression testing machine

ZwickRoell GmbH Z005TN

Condition: good (used), Year of construction: 2003, machine/vehicle number: 4N1028, overall weight: 300 kg, total length: 1,400 mm, total height: 1,520 mm, total width: 780 mm, type of input current: AC, input voltage: 230 V, Equipment: type plate available, SPECTRO LAVMC05A SPECTROLAB spark spectrometer, metal analysis device Godpfx Adjvytalo Djui Input: 230 VAC / 50 Hz Power: 2500 VA

Condition: new, Year of construction: 2024, functionality: unexamined, power: 265 kW (360.30 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA 6-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 90°C / RL 75°C, with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). Godpet E N I Sefx Ad Deui TECHNICAL DATA GENSET /BHKW - NATURAL GAS/BIOMETHANE Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output motor: 150 kWth Thermal output at 120°C exhaust gas temperature: 129 kWth Total thermal output: 279 kWth Electricity coefficient el/th. : 0,95 LEAN TURBO NATURAL GAS / BIOMETHANE ENGINE Engine type 6R Displacement: 12,7Ltr Combustion heat output - 100% load: 632kWel Gas consumption: 63,2Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container.

Condition: excellent (used), Testing system for measuring tensile and compressive forces up to 100 kN Manufacturer: Zwick Type: 7045.370.1a Materials testing machine Tensile and compressive forces up to 100 kN PC Software: testXpert testing software Documentation: Basic program for tensile and compression testing Zimt command interpreter Instruction manual Cards & Modules: Zwick ZPS 7095.1 Rev.: d Power supply unit Zwick ZPU 7095.2 Rev.: j Central processing unit Zwick ZAST 7096.4 Rev.: f Drive control unit Sieb & Meyer AC-Servo 26.39.2 AC-Servo module Dimensions: Height: 3200 mm Width: 1120 mm Depth: 620 mm Weight: 1140 kg Modernization of the Frank machine 81120 1995 Cost: 113,000 DM Modernization of the universal testing machine with digital measurement and control electronics Additional slots for 3 connection cards Gsdpfx Adsqtrkde Deui Remote control for extended control of the testing machine during setup and test execution Measuring amplifier (TF) for force or analog length change Connector for voltage measurements (e.g., single strain gauge with preamplifier), without calibration Connector for strain gauge transducers for force or displacement measurement, without calibration Control unit with IEEE 488 bus card ZIMT program for calibrating the force transducers in conjunction with the DK 38 MGT 32 S 71 (0 ... 10 V output) and the Keithly 182 digital multimeter Program sequence: 10 calibration steps under load or unload Files are available in the ASCII file Drive unit for the Frank 81120 AC Motor Resolver with motor plate Find more new and used items in our shop! International shipping costs on request!

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Guodpjd N Dn Djfx Ad Dei Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: new, The Turnado 230/1500 PRO is a high-performance Conventional Horizontal Lathe from KNUTH, designed for precision and efficiency in your machining tasks. This Engine Lathe represents the latest generation of universal lathes, boasting features developed and refined over 20 years. With its new apron design and ergonomic frame, users can enjoy improved comfort and productivity. The machine's robust construction includes a heavily ribbed machine bed and a rigid headstock, providing a solid base for machining operations. Key features such as an infinitely variable speed range, rapid feed motor, and a constant cutting speed ensure excellent surface quality and time efficiency. The Turnado 230/1500 PRO is equipped with essential standard equipment, including a 3-axis position indicator and a powerful main spindle drive that guarantees high torque and adaptability to various workpiece sizes. To enhance reliability, all guides are adjustable, and a central lubrication system simplifies maintenance. Explore the versatility of the Turnado 230/1500 PRO Engine Lathe, and discover how it can elevate your machining capabilities. Request a quote today to learn more about this exceptional Conventional Horizontal Lathe and how it can benefit your workshop. Gujdpfxsuy Id Ne Ad Dji

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Gsdpfx Asd Sr S Iod Doui

Condition: new, The new vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Gedpfx Aottzxred Djui Oil filling: without Technical data: 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return suction in non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: like new (used), Year of construction: 2023, Robot plant used to unstack, can also serve as palletizer. Due to change activity of the customer, it has only been in production for a few months. The complete installation is like new and can be easily adapted to a (de)palletizing robot with a gripper tailored to your product. The installation includes: - Robot Kuka KR120-PA + robot base and gripper - 6 pallet roller tracks + 2 forklift collision protections - 1 pallet dispenser, it can stack and unstack pallets - fence with 2 sets of safety light curtains Gjdpfsuczuwox Ad Deui - control cabinet with Siemens PLC and Siemens HMI

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Gsdpstyyn Hsfx Ad Djui

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 15,000 mm, total height: 2,800 mm, pressure: 8 bar, power: 10.9 kW (14.82 HP), empty load weight: 6,400 kg, input voltage: 400 V, filling weight (min.): 200 g, filling weight (max.): 5,000 g, XFR 1000 Liquid Media Filling Line A fully automated liquid media filling line featuring robotic capping, automated handle placement, dual-sided labelling, optical quality control, and pallet wrapping. An end-to-end solution covering the entire process, from bottle blowing to the palletizing and wrapping of filled bottles. XFR LIQUILOAD It enables optimal filling speeds for bottles of varying characteristics and liquids of different viscosities. The machine’s easy configuration for different bottle types and corresponding liquids ensures quick adaptation to market demands. • Capability to increase the number of nozzles • Nozzles designed to prevent foaming of the liquid • 800 to 4,000 filled bottles per hour • Servo-driven nozzle positioning • Easy configuration of new programs XFR BOTTLELOCK The machine segment performs fully automated capping of filled bottles. Designed to accommodate various cap types, simplifying machine adjustments for seamless operation. • Cap type adaptability • Robotic bottle capping • Optical inspection • 800 to 2,000 capped bottles per hour XFR HANDLEGRIP The automatic robotic placement of handles on bottles, while they move continuously towards the labeling machine, ensures seamless and uninterrupted operation. • Adaptability to different handle types • Robotic handle application on bottles • Optical inspection for handle orientation verification • Capability to attach handles with a funnel XFR LABELFLOW Gedpfouq Nv Tox Ad Dsui The machine applies the appropriate labels to both sides of the bottle, creating a finished appearance. In the next phase, the labelled bottles undergo optical inspection. • HERMA labelling system • Simplified label type changeover • Servo-driven for enhanced labeling precision • Monitoring of remaining labels with operator alerts OPTIONAL PARTS: 1. OPTICAL INSPECTION Industrial cameras with integrated lighting and pneumatic ejection system. 2. PICK AND PLACE ROBOT 6-axis robot equipped with a 160 kg gripper for the current handling of 8 bottles onto a Euro pallet. 3. PALLETIZING Palletizer with automatic pallet feeding via a roller conveyor to the bottle stacking area. 4. PALLET WRAPPING The automatic pallet wrapper applies stretch film to palletized products, securing them for easier and safer transport. 5. FINISHED GOODS STORAGE Finished pallets are transported to the warehouse via a metal roller conveyor. 6. REMOTE CUSTOMER SUPPORT We provide remote support to ensure optimal machine performance. 7. ADDITIONAL OPTIONS Automated data integration with ERP systems; RFID login; NFC detection of parts and tools; magnetically mounted tools. 8. MACHINE CONFIGURATION Segments can operate independently or as an integrated solution, depending on the client's specific needs. Proton EE-Elektronika d.o.o. MachinFlex d.o.o.