Used cantilever racks for sale (103)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Gjdpfxov Smr So Aftouk Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 2.60m height, 1m arms, 600kg per arm, hot-dip galvanized - new -: Price: € 1,485,- (net) transport within Germany (excluding islands)!430,-€(netto) Gjdpjd Epfvefx Afteuk Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelf uprights on one side 2,600 mm high, hot-dip galvanized - Foot and arm depth 1000 mm - each with 3 height-adjustable shelf arms - Load capacity at a load center of 500 mm - 600 kg per arm / 1,800 kg per stand with 4 stands per arm level 4 x 600 kg = 2,400 kg Profiles: Frame (stand): IPE 140, arms IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, TECHNICAL DATA • Length of sheets: 2,400 mm or 4,000 mm • Width of sheets: 150 mm • Material thickness: 1.5 mm • Load capacity: 500 kg/m² • Condition: used Available quantity: approx. 3,000 m² PRICES: • per m²: €15.00 net Available ex-stock Nordhorn. Optional accessories • Guardrail Gedpfxjvdqi Se Aftjuk • Staircase • Transfer station • Collision protection YOUR CONTACTS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transportation and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. Additional costs depend on the place of delivery and the size of the consignment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the case of an order. The price is quoted per unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and the skilled trades. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) Gedpfxsh R Taqs Aftjuk - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, carrying capacity per cantilever arm: 810 kg, load capacity: 3,900 kg, shelf height: 2,500 mm, total length: 38,750 mm, axle spacing: 1,250 mm, clearance between the columns: 1,250 mm, load capacity per stand: 3,900 kg, throat depth: 800 mm, We hereby offer you, subject to change, 39 linear metres of used heavy-duty cantilever racking, with a load capacity of 3900 kg per stand. Guodpfx Aovt Um Hoftok Manufacturer SSI Schäfer GmbH Type KR Year of manufacture 2008 Stand load per stand side 3900 kg Support profile stand IPE 180 Stand height 2500 mm Cantilever arm length 800 mm Cantilever arm load 810 kg Cantilever arm profile with deflector INP 80 Composition: 34 stands 68 cantilevers 6 cross braces, axis dimension 1250 mm 72 longitudinal braces, axis dimension 1250 mm Cantilever arm shelving system 1: 16 stands, 15 bays, 34 cantilevers, 30 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 17.5 linear meters Cantilever arm shelving system 2: 18 stands, 17 bays, 38 cantilevers, 34 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 21.25 linear meters Condition: The cantilever rack is in very good condition as you can see in the photos and is loaded onto pallets dismantled. The above technical data was taken from the manufacturer's brochures or other sources for which we cannot guarantee their accuracy and completeness. The sale is without guarantee or warranty. We would be pleased if this cantilever rack is of interest to you and look forward to your inquiry. Your Mertens & Frowein GmbH service team

Condition: like new (used), Year of construction: 2019, functionality: fully functional, carrying capacity per cantilever arm: 725 kg, load capacity: 8,700 kg, shelf height: 8,700 mm, total length: 4,700 mm, total width: 2,600 mm, total height: 8,700 mm, axle spacing: 1,500 mm, throat depth: 1,200 mm, load capacity per storage section: 2,900 kg, Equipment: double-sided, Cantilever racking in good condition Gsdjw Uf Emopfx Afteuk

Year of construction: 2019, condition: like new (used), On offer are used and new cantilever racks and pallet heavy duty racks. We will be happy to provide you with an individual offer. Please inform us about the following: Gjdpfxjhr D Dto Aftouk - Length and height of the desired rack, - number of shelf levels, - shelf loads. If you have any questions, please do not hesitate to contact us. Pictures are sample photos.

Condition: new, Year of construction: 2020, Cantilever rack, one-sided, 6.30m high, 1.20m arms, 900kg per arm - new - : Price ex location incl. loading! 1 shelving unit with 4 uprights 3.732.-€ (net)! Transportation costs within Germany (without islands): 490.-€ (net)! One cantilever shelving system, hot-dip galvanized, consisting of: Shelving upright, one-sided approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center 600 mm 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level 4 x 900 kg = 3,600 kg Gsdjfivg Sspfx Aftjuk Profiles: Frame: IPE220, arms: IPE 100 with longitudinal and diagonal bracing e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all nuts and bolts (dispatch within Germany by parcel direct from Würth), without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) available! Please contact us!

Condition: excellent (used), carrying capacity per cantilever arm: 330 kg, shelf height: 2,500 mm, axle spacing: 1,250 mm, shelf length: 5,200 mm, Cantilever racking H 2500 mm Manufacturer: BITO Length: approx. 5.2 meters Height: 2500 mm Load per arm: 330 kg Cantilever arms, length 600 mm Distance between uprights: approx. 1250 mm Total depth of racking: 1340 mm The cantilever rack consists of: * 5 uprights with base, made from IPE 140 profile, upright height 2500 mm * 35 cantilever arms, length 600 mm, load per arm 330 kg * Diagonal braces, bolts, connectors Total weight: approx. 500 kg Price: 1,000 euros net Gedjwzzrqspfx Aftjuk 2 sets available

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Godpfx Afsmhhf Sjteuk - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Height: approx. 2000–4500 mm Width: approx. 1130 mm Usable depth: 1 x 1000 mm Upright load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base Single-sided design Bolted foot profiles Made from hot-rolled IPE sections Finish: high-quality industrial lacquer RAL 5010 Freely adjustable cantilever arms in 100 mm increments Rack upright: foot and arms bolted Increase storage capacity with reduced footprint Organized storage of long goods Guodpfx Aep Dukqjftek Price: €400/net per upright incl. We configure your custom racking system. Contact us. We also buy racks. Please send pictures and dimensions—we will make you an offer. Contact Brennholz Blum – Mr. Dominik Blum Delivery is available upon request For questions, just call or write.

Condition: excellent (used), Year of construction: 2009, carrying capacity per cantilever arm: 800 kg, load capacity per stand: 8,000 kg, number of shelf rows: 5, frame height: 7,500 mm, shelf length: 1,200 mm, Equipment: double-sided, OHRA Cantilever Racks Year of production 2009 - 5 rows of double-sided racks 120 pcs of columns - Column height 7500 mm - Distance between columns 1250.mm -1600mm - Arm length 1200 mm Gusdpfx Ajwfm Urjftok - arm load capacity 800 kg - column load capacity per side 4000 kg - Number of levels 5 Current capacity approx. 280 pallet places approx. 400 packages of sawn timber up to 3m long Last inspection 06.2024 The racks are currently installed Dismantling on the buyer's side Net price given We can offer a Combilift C4000 LPG 7500mm Triplex trolley for the racks

Condition: new, Year of construction: 2022, Jungheinrich, Kongamek support arm trolley Drying boards for carpenters or joiners Jungheinrich article number: 167793-4A several available 3 packages, can be sent 14 layers Support arm diameter 20mm Guodpfx Asvntzxoftjk Installation height 1770mm External dimensions height 1960mm and length 1520mm Frame width and external dimensions depth 860mm Load capacity per level 20kg Own weight 73mm Delivered disassembled

Condition: good (used), Year of construction: 2005, Cantilever rack, two-sided, height 2.90 m, arms 1.20 m each with 2 crossbeams between the arms/levels, ideal for storing goods, e.g., on Euro pallets - used -: Price ex-site: €24,500 (net) including disassembly and loading! Price for partial quantities upon request - minimum order per rack! Gedpfswi I Tdjx Aftsuk Manufacturer: Bruckamp Shelving Systems Type: unknown Year of construction: 2005 Maximum load per arm: 2,000 kg Arms bolted Maximum load per upright: 2 x 2,000 kg Outreach per arm: 120 cm (IPE 100 standard) Total height per rack: 2.90 m (IPE 160) Number of uprights: 69 (currently 3 x 23) The center distance between the frames is 1,240 mm. The heights of the middle and top levels are fixed. These could possibly be offset by drilling new holes. There are no pre-drilled holes. Version / Shelf A: Divided into three sections on both sides Version / Shelf B: No middle section Version / Shelf C: Central section only on the right Condition: Good Available: Immediately Location: Schweinfurt / Würzburg area

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) Guodpfx Aed Tqaloftjk - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Gedpfxefdkb Uj Afteuk - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm Godjfdkbhopfx Aftsuk 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments Godpfomhhyaex Aftouk - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Godpfx Aemhhx Ioftjuk Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Gsdpfx Ajd Tbbdsftouk - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg Guodpomidyfefx Aftjk - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm Gedpfxeqt Dmys Aftsuk - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Godpemhhl Hjfx Aftjuk Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Gsdpfsmkixwjx Aftsuk - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Godpjh Ek Daefx Aftouk Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.