Temesgen Ayana

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Max. Sheet Width: 750mm Sheet Thickness Range: 0.35-2mm Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Main Motor Power: 110kw Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Weight: About 15T Hnsdpfx Aioyvh Ube Nep

Year of construction: 2022, condition: used, Model: TTF-520AF Forming Area: 520mm x 400 mm Forming Depth (Max.): 110mm Hnjdpfeyvh Tqox Ai Njp Sheet thickness: 0.2-1.6mm Forming Speed (Max.): 30times/min Air pressure: 0.6-0.8mpa Air consumption: 3.0 m³/min Water consumption: 0.7 m³/h Sheet width (Max.): 550mm Suitable Sheet: PP, PS, HIPS, PET, PVC, PLA etc. Power supply: AC 380V, 50Hz, Three-phase, Four-wire Used power: 55Kw Rated power: 136Kw Heating power: 75Kw Procedure: Forming-punching-cutting-stacking Dimension: L10800*W4650*H2670mm Weight: About 11.0T

Year of construction: 2022, condition: used, Model: TQC-650B Max. Forming Area: 650*300mm Max. Forming Depth: 125-180mm Sheet Thickness: 0.3-1.8mm Sheet Width: 660mm Hjdpeyvh S Hjfx Ai Nsnp Max. Forming Speed: 30 times/min Air Pressure: 0.6-0.8mpa Air Consumption: 2.0m³/min Water Consumption: 0.5m³/h Rated Power: 98Kw Used Power: 69Kw Power Supply: AC 380V,50Hz, Three-phase, Four-wire Dimension: L7000*W2000*H3100mm Weight: About 5T

Year of construction: 2019, condition: ready for operation (used), A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. The system allows mechanical preparation for retrofitting up to 3 additional filler metering systems. It is recommended to renew the lines and the diaphragm pumps before commissioning. Documentation available. An on-site inspection is possible. Hedpfx Aijyt N A Hj Nonp

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h Hedpjxwnb Isfx Ai Nonp No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Year of construction: 2005, condition: excellent (used), Vertical block mould machine: Kurtz mod. Ecomat Basic data: • Year of production: 2005 • Block dimensions (LxWxH): 1060x1320x5200 mm The set includes inlays (height reducers) for blocks: - 1060x1320x5130 mm - 1060x1320x4000 mm • Electrical power demand: 400V; 50Hz • Operation silo • Roll out conveyor • Block scale • Inkjet printer • Complete documentation We also have for sale other machines for EPS (expanded polystyrene) production, such as: •steam generator •steam accumulators with capacity Hjdexq N Amspfx Ai Nenp •3x cutting lines •3x blockmolds •pre-expander It is also possible to purchase a complete production line (including installation, commissioning, and staff training).

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, Hnodpfxow Nriuj Ai Nsp Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 The capsules are produced as free-falling parts.

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: Hnodpfev Hm A Tex Ai Nsp -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Automatic wire positioning is available on the key cutting stations: -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Automatic cylinder adjustment in the Down-Cutter station: When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. No manual adjustment is required.

Condition: excellent (used), Year of construction: 2005, Vertical blockmold: KURTZ mod. MFV (4920 x 1274/1000 x 1240mm) Hedpfeucvq Hox Ai Nenp Basic data: -Year of manufacture: 2005 -Block dimensions (HxWxL): 4920 x 1274/1000 x 1240mm -Operating voltage: 3×400 V, 50 Hz -Power consumption: 77 kW -Blockmold with movable side wall -Complete vacuum system (GARDNER DENVER / SIEMENS) -Hydraulic system: REXROTH–BOSCH -Operational pre-loading silo for the blockmold with dedusting system -Siemens PLC controller and Siemens touch-screen HMI control panel replaced with NEW units in 2019, including a control software upgrade -Siemens TOUCH SCREEN panel (replaced with a NEW one with a larger display) -MATTHEWS printer for block labeling/date marking -Block evacuation system with block storage -Complete set of documentation -Condition: EXCELLENT It is possible to adjust the maximum block height to, for example, 4550–4600 mm. TAG: Block mold, block mould, block-form, styrofoam, EPS, VIRO, Kurtz, Erlenbach, EREMA, Teubert, Lauscha, Autefa, HIRSCH, EPPINGER, Mert Makina

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Complete line in "U" arrangement, consisting of: - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) - Year of manufacture: 2003 Hsdpfxsuct Upj Ai Nonp - Electricity requirements: 400V; 50 Hz; 115 kW; 300A

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Hodpfxekucxlo Ai Nsnp Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome. Hsdpfx Aiei Dtb Uo Njnp

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric Hedpfoi Dtb Ajx Ai Nenp > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement