Handelsvertretung Schwarzbeck

Condition: used, Year of construction: 2007, x-travel 520 mm Hedpsxxb Iwofx Ad Djnw y-travel 730 mm z-travel 510 mm Control Matsuura Fanuc spindle tunring speed 15.000 U/min table surface area 300 x 300 mm tool taper BT 40 number of tool places 240 Pos. rotating range 360 ° swivelling range ° Number of working hours ca. 20.700 h spindle hours ca. 6.700 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. It is a well-maintained machine with low spindle hours. Technical features & accessories: - Internal coolant supply - Renishaw touch probe system - Chip conveyor - 5-pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2007, operating hours: 23,090 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Siemens, controller model: 840D powerline, table width: 380 mm, table length: 500 mm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, number of axes: 5, Equipment: chip conveyor, For sale is a machining center from manufacturer Deckel Maho, model DMU 50, in well-maintained and technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and mechanically. It is fully operational, tested, and ready for immediate use. Additional equipment: - Paper band filter Hnedpfxoxwtp Rj Ad Dew - Coolant system With our all-inclusive package, we personally handle the complete service for you upon request – from delivery to the commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary function tests, and ensure your machine operates reliably and precisely. Furthermore, we offer tailored training sessions for your employees so that you can maximize the potential of your machine from day one. Even after installation, we remain at your service—be it for maintenance, technical questions, or future upgrades. With our all-inclusive package you have nothing to worry about – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us – including high-quality Donaldson extraction units – to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other brands. We place great value on personal support and continue to assist you even after the purchase. You are also welcome to inspect and test the machine under power at our facility at any time. We cordially invite you to visit us and see the condition and functionality of the machine for yourself. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: used, Year of construction: 2022, operating hours: 5,403 h, functionality: fully functional, machine/vehicle number: 315D210043, travel distance X-axis: 712 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 25 kVA, torque: 108 Nm, controller manufacturer: Siemens, controller model: S828D, total height: 3,350 mm, total length: 2,720 mm, total width: 3,900 mm, table load: 200 kg, rotary table diameter: 410 mm, overall weight: 8,730 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,182 h, coolant supply: 3 bar, number of slots in tool magazine: 48, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, QUASER UX 500 C Siemens S828D 315D210043 including 10.4" screen with movable operator panel, tiltable and rotatable Software option: 3D simulation Software option: network drive management Main spindle SK40, suitable for standard holders and holders with face contact according to DIN 69871 Tool pull studs according to DIN 69872 (not included) Main spindle speed 12,000 rpm, 13.3 kW/85 Nm (S6-25%), direct-coupled, SC-4.2 Includes temperature-controlled cooling system Portable electronic handwheel Heat exchanger for electrical cabinet Double-arm tool changer with 30 magazine positions Pneumatically operated tool changer door Direct position measuring system on rotary axis Direct position measuring system on swivel axis Infrared receiver for workpiece and tool measurement Machine color: RAL 7035 Light Grey Coolant tank, spindle head, and doors: RAL 9005 Jet Black Three-color signal tower Coolant spray gun External air blast for dry machining Automatic central lubrication for ball screws Computer-optimized heavy machine base made of heavily ribbed cast iron Stable and rigid machine construction due to portal design Chip removal system, consisting of work area chip flushing with Grundfos pump 75 l/min at 3 bar, chip trays made of stainless steel, and 2 screw conveyors in the work area Full work area enclosure with 2 corner sliding doors and 2 work area lights Flood coolant system with 4 ring nozzles positioned at the spindle nose, supplied by Grundfos pump, 75 l/min at 3 bar Year of manufacture: 2022 Hodpfexwp E Uox Ad Djnw

Condition: used, Year of construction: 2015, operating hours: 9,278 h, functionality: fully functional, machine/vehicle number: 11415739234, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 470 mm, Additional equipment: Infrared measuring probe 4-color signal light High-pressure cooling 5-axis simultaneous milling This 5-axis DMU50 operates with a spindle speed of up to 18,000 rpm. The machine features a 30-position HSK-A63 tool magazine, a tiltable rotary table, and the Siemens 840Di sl/840D sl CELOS control system. Please feel free to contact us for further information about this machine. Hnsdpoxwlhljfx Ad Dew The machine can be inspected and tested on site.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 46,380 h, Main Drive Number of axis 5 Spindle Speed 14000 RPM Spindle motor power 19 kW Movement X-Axis Movement 500 mm Hnedpfsxwfk Hjx Ad Djw Z-Axis Movement 400 mm Y-Axis Movement 450 mm Control Unit Brand SIEMENS Model 840 DSL This 3+2-axis DMG DMU 50 was manufactured in 2008, featuring a Siemens 840 DSL control system and a spindle speed of 14,000 rpm. It includes a 30-position tool changer and an NC rotary swivel table with B-axis and C-axis capabilities. The machine also has an internal coolant system and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the DMG DMU 50 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2008, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 410 mm Y-axis: 610 mm Z-axis: 500 mm Table Data Table size: 320 x 320 mm Maximum table load: 100 kg C-axis: 360° B-axis: +30° to -120° Spindle & Tool Holder Hodpsxv Dzuefx Ad Donw Speed: 15,000 rpm Tool holder: SK 40 Magazine with 48 positions Pallet storage: Indumatik light

Condition: good (used), Year of construction: 2012, operating hours: 51,149 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 600 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, spindle speed (min.): 18,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 120, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Pallet changer including 2 pallets 630x630 Control: Siemens 840D HSK63 spindle, 18,000 rpm Tool magazine for 120 tools Measuring probe: Heidenhain 3D quickSET preparation Four-color signal light Blow air through spindle center Scraper belt chip conveyor with slotted screen Internal coolant supply with 980L tank Rinsing gun for chip flushing Operating mode 4 C-axis: direct drive, integrated balancing system Extended chip flushing Swiveling tool laser measurement Operating hours: 51,149h, spindle hours: 26,121h Spindle NEW from Kessler including measurement protocol Viewing windows NEW, bellows NEW OPTION Milling / Turning package NC rotary milling table, C-axis with direct drive and integrated balancing system Motor spindle 20-18,000 rpm Power: 35/25 kW (40/100% duty cycle) Tool holder HSK-A63 Spindle clamping for turning mode Reinforced cabin version for FD 3D probe for turning tools Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and expert assembly – all from a single source. Billing based on individual terms and contract period. Contact us for your personal offer. Hsdpfx Ajxv Ak Ujd Djnw

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. spindle speed: approx. 10,000 rpm Hnjdpfx Adoxvzy Ue Dsw Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 1997, Immediately available from training workshop: CNC 5-axis milling machine Deckel Maho Model: DMU 50 T Year of manufacture: 1997 Control: MillPluss SK 40 Spindle speeds: 20 – 9,000 rpm Travel X/Y/Z: 500/400/400 mm Table: tilting rotary table 700 x 500 mm Manual tilt B axis 105° (-10/+95°) Manual rotation 360° Table load max 200 kg Tool changer: 16 positions Hnsdpsxvny Isfx Ad Dow Feed rates max 10,000 mm/min Rapid traverse: 12 m/min Drive: 17 kW Weight: 3 t Extensive accessories: hydraulic vice, tool holders, milling cutters Price: €6,500.— plus VAT ex location

Condition: excellent (used), CNC Milling Machine Deckel Maho DMU35M (incl. rotary encoders in the C and B axis) Serial no.: 11065352034 Year of manufacture: 2000 Control: Siemens 810 Hnedpjxu Un Njfx Ad Djw Travels: X: 350 mm Y: 240 mm Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm Table load capacity: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X/Y/Z): 5 m/min Total power requirement: 15 kVA Spindle speed range – main spindle: 20 – 6,300 rpm Drive power – main spindle: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 The machine is in very good condition and fully operational. The following repairs have been carried out: - Spindle newly fitted with bearings - New rotary encoders - Spindle motor overhauled Net price ex works, loaded on truck from stock.

Condition: used, Year of construction: 2003, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, controller manufacturer: HEIDENHAIN, CONTROLS .. CNC controls. HEIDENHAIN WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 500 mm .. Y-axis travel: 400 mm Hnedpexu Ahwjfx Ad Dew .. Z-axis travel: 400 mm TABLE .. table surface (left-right): 700 mm .. table surface (front-back): 500 mm SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 40 TOOL MAGAZINE .. number of positions: 16 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5000 mm .. space requirements -front/back-: 3700 mm .. total height: 2500 mm .. total weight approx.: 4500 kg 4726 spindle hours, 10,000 operating hours

Condition: ready for operation (used), Year of construction: 2008, operating hours: 90,000 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: Fanuc Series 16i MB, spindle speed (max.): 30,000 rpm, In recent years, more than €50,000 has been invested in the machine – the following components have been replaced/repaired, among others: Main spindle - tool holder Spindle drawbar Tool change gearbox Ball screws for X/Y/Z/U axis Motor for Z-axis Motor for U-axis TECHNICAL DETAILS Hnjdpfxsxuphqj Ad Djw Travel X: 250 mm Travel Y: 200 mm Travel Z: 300 mm Max. workpiece diameter: 32 mm Spindle speed: max. 30,000 rpm Spindle interface: HSK-E40 Tool changer: 48 positions Axes: 5 + gripper MACHINE DETAILS Control: Fanuc Series 16i MB Operating hours: approx. 75,000 h EQUIPMENT Bar loader LNS Hydrobar Express 332 Coolant filtration system Internal coolant supply (IKZ) Spindle cooling Note: The machine is offered without tool holders and collet chucks.

Condition: used, Year of construction: 2005, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, controller manufacturer: SIEMENS, controller model: 840 D, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 500 mm .. Y-axis travel: 450 mm .. Z-axis travel: 400 mm .. rotating range B-axis from: 110 ° .. rotating range B-axis up to: -5 ° .. rotating range C-axis from: 0 ° .. rotating range C-axis up to: 360 ° TABLE .. table surface (left-right): 630 mm .. table surface (front-back): 500 mm .. clamping surface diameter: 630 mm .. workpiece load (max): 200 kg SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 40 .. drive power: 9 kW TOOL MAGAZINE .. number of positions: 16 .. tool diameter max.: 80 mm .. tool weight max.: 6 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2000 mm .. total height: 2400 mm .. total weight approx.: 3700 kg ATTACHMENTS .. zero-point workholding system: yes Operating hours: 47,800 hours Spindle hours: 20,300 hours Hnedpfxoxun Dws Ad Djw Equipment: - Unilock clamping plate - 2 vises - Exhaust filter

Condition: ready for operation (used), Year of construction: 2019, Main Drive Spindle speed range 35 – 12000 Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 550 mm Hnjdpjxulc Refx Ad Dsw Z-Axis Movement 510 mm Table Table load 300 kg This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2011, Serial no. 107.88.00.177, control unit by Heidenhain, type iTNC530, 5 axes, travel X/Y/Z 800 x 600 x 500 mm, rotary/swivel table 280 x 280 mm, STEP TEC electrospindle, max. speed 42,000 rpm, 68-position tool changer, tool holder HSK 40, 40-position electrode changer, extraction system by Extor, type 4500-SMPIP, cooling unit, enclosure, BLUM laser measuring system, tool and accessory package, 2 rolling tables, sliding door cabinet (2-door), contents: tool holders, setup tools. Hnsdpfx Aoxugy Dod Dow

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical Data: Machine Type: - DMU 50 eVo Linear 5-Axis Simultaneous Machining Center Hnsdpfsxt T Ncsx Ad Dow - Year of manufacture: 2005 - Travel paths: X-500mm, Y-450mm, Z-400mm Control: - CNC control: Siemens 840D (ShopMill) - Electronic handwheel - 3D probing system Spindle: - Tool holder: SK40 - Speed range: max. 18,000 rpm Tool Magazine: - Automatic tool changer with 30 magazine slots Table Type: NC swivel rotary table - B-axis: -5° to +110° - C-axis: 360° Coolant: - External coolant supply Operating Hours: - Machine power-on: 23,677 - Spindle running: 7,994 Availability: - Immediate Accessories: - 1 hydraulic vise (see picture) - 30 SK40 tool holders (tool changer fully equipped) Special Features: - Machine can be inspected and tested under power on site.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 36109, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 6,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 6,000 m/min, nominal power (apparent): 16 kVA, total height: 2,000 mm, total length: 3,000 mm, total width: 2,800 mm, table width: 480 mm, table length: 800 mm, table load: 530 kg, rotational speed (min.): 31 rpm, rotational speed (max.): 5,000 rpm, overall weight: 2,800 kg, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Neat machine, still runs smoothly and produces precise work. The machine can be inspected in operation. Hjdpfx Adoxt Nlyj Dsnw

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 50 T Offer Details Stock number: 1039-9277 Type of machine: Universal Machining Centre Manufacturer: DECKEL MAHO Model: DMU 50 T Year of manufacture: 1998 Control: TNC 426M Heidenhain Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex site Additional information: CNC Universal Machining Centre DECKEL MAHO - DMU 50 T Hnedpfx Aext Eyyed Dsw - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manual via handwheel) WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Travel (X-axis): 500 mm Travel (Y-axis): 400 mm Travel (Z-axis): 400 mm Control: TNC 426M Heidenhain Main spindle: - Speed range (main spindle): 20 – 9,000 rpm - Drive power (main spindle): 9 / 13 kW - Max. torque: 57 / 82 Nm - Tool interface: ISO 40 DIN 69871 Swivel rotary table: - Table size: 700 x 500 mm - Swivel angle (B): 105° (-10°/+95°) manual - Rotary axis (C): 360° manual - Max. table load: 200 kg - Number of T-slots: 7 - T-slot pitch: 63 mm - T-slot width: 14H7 mm - Center bore: 30H7 mm Tool changer: - Tool magazine positions: 16 - Tool holder: ISO 40 DIN 69871 - Max. tool length: 290 mm - Max. tool weight: 6.0 kg - Max. total tool load: 50 kg Feeds: - Feed rate: max. 10,000 mm/min - Rapid traverse: 12 m/min - Programming increment: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m Equipment - Documentation - Chip tray - Coolant system - B-axis manual - C-axis manual - Swivel rotary table - Tool changer (16 positions) - Electronic handwheel - Operating Mode 4

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Since 2014, we have been developing and manufacturing our systems in Austria as a machine builder. In addition to our customizable standard machines, we are also capable of providing special solutions upon request. We would be happy to send you our product catalog—just contact us. Machining Center HSC 544HP 3rd Generation Key Specifications - Travel range: 500 x 400 x 330 mm - BT30 spindle with 20,000 rpm and 10.5 Nm - 18-position tool magazine - Feed rate up to 27 m/min - Includes portal elevation and rotary-swivel table, table diameter 160 mm - Compact dimensions: W 1,460 x D 1,470 x H 2,230 mm, weight approx. 2,200 kg The machines are configured and built according to customer specifications. Depending on requirements, numerous options are available, such as various spindle types up to 60,000 rpm, different cooling systems, direct path measuring systems, integrated automation, and more... Controller - CS-Lab / AMT | Beckhoff optional - User-friendly and customizable interface, easy operation via touchscreen - S-curve acceleration for dynamic axis movement with high precision - Integration of robots, pallet changers, workpiece changers, etc., possible Hnodpfxsxtvfyj Ad Dow Machine Frame - Solid mineral cast machine frame optimized via FEM simulations - Excellent vibration damping, rigidity, and optimal thermal characteristics - Use of roller guides instead of standard ball guides for maximum stiffness - High-speed ball screws with minimal heat generation Drive Train - Precisely matched AC servo drives for high contour accuracy - Direct-drive, backlash-free ball screws Spindle Types Overview 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We are happy to provide you with competent and comprehensive advice to deliver the ideal solution for your machining application.

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock number: 1039-8700 Machine type: Vertical Machining Centre Manufacturer: DECKEL MAHO Model: DMU 125 T Year of manufacture: 1998 Control: Heidenhain TNC 426 Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex-site Additional information: CNC Vertical Machining Centre DECKEL MAHO - DMU 125 T - ICS (internal coolant supply) WE OFFER YOU: • Workshop-inspected machines • Free loaded onto truck • NO auction fees • Delivery possible (at extra cost) • Unloading and commissioning (at extra cost) Technical Details Travel paths: X-axis travel: 1,250 mm y-axis travel: 880 mm z-axis travel: 800 mm Control: Heidenhain TNC 426 Main spindle: • Spindle speed range: max. 12,000 rpm • Main spindle drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Worktable: • Clamping surface: 1,500 x 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Tool changer: • Number of tool pockets: 30 positions Hnjdpfxsxtmpij Ad Dow • Max. tool diameter: 80 mm • Max. tool diameter with adjacent pockets empty: 160 mm • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total tool weight: 100 kg Feed rates: • Rapid traverse (X / Y / Z): 15 m/min • Feed rate: 10,000 mm/min Total power consumption: 29 kW Machine weight approx.: 16.0 t Space requirements approx.: 7.0 x 5.0 x 3.3 m Accessories • Documentation • Chip conveyor • Coolant system • High-pressure cooling • Internal coolant supply • Tool changer • Touch probe (Heidenhain) • Electronic handwheel

Condition: used, Year of construction: 2011, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, controller manufacturer: 3D MILLPLUS IT V600, CONTROLS .. CNC controls. 3D MILLPLUS IT V600 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 500 mm .. Y-axis travel: 450 mm Hnjdpfx Adjxr T U Ns Dew .. Z-axis travel: 400 mm TABLE .. table surface (left-right): 700 mm .. table surface (front-back): 500 mm .. workpiece load (max): 500 kg SPINDLE / HEAD .. spindle revolutions (min): 20 /min .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 40 .. drive power: 13 kW AXIS DRIVES .. traverse velocity X (max): 24000 mm/min .. traverse velocity Y (max): 24000 mm/min .. traverse velocity Z (max): 24000 mm/min TOOL MAGAZINE .. number of positions: 30 .. tool diameter max.: 80 mm .. - with free neighbour positions: 130 mm .. tool length max.: 300 mm .. tool weight max.: 6 kg .. tool changing time: 8 s ATTACHMENTS .. European CE standards: yes No cooling system; the machine is connected to a central cooling system. 17,153 operating hours, 2,940 spindle hours

Condition: ready for operation (used), Year of construction: 2009, operating hours: 51,610 h, functionality: fully functional, machine/vehicle number: 11580008963, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530, table width: 600 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 730 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: +120° ~ -120° Table Table size: 1,000 mm x 600 mm Maximum workpiece weight: 800 kg Spindle Maximum spindle speed: 18,000 rpm Spindle taper: HSK-63 Spindle motor power: 19 kW Tool Magazine Number of tool stations: 60 MACHINE DETAILS Control: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,450 x 2,450 x 2,650 mm Weight: 8,000 kg Electrical data Apparent power: 49.7 kVA Maximum current draw: 72 A Rated current: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating hours Hnjdpfx Adsxrzt Ho Dsw Machining hours: 51,610 h Control on hours: 115,006 h

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 09751 N00260, travel distance X-axis: 610 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, nominal power (apparent): 50 kVA, workpiece weight (max.): 300 kg, total width: 650 mm, table width: 450 mm, rotational speed (max.): 10,000 rpm, overall weight: 7,500 kg, operating hours of spindle: 37,257 h, spindle motor power: 15 W, spindle nose: BBT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC machining center with turning table, allowing loading on one side while the machine is operating on the other side. You are welcome to visit us and see the machine in operation. Hsdpexrcm Ijfx Ad Djnw I can also forward a video of the machine if required.

Condition: used, Year of construction: 2009, x-travel 500 mm y-travel 250 mm z-travel 400 mm CNC-control Mitsubishi M70 Table dimensions Ø 250 mm max. table load 60 kg spindle taper HSK 63 spindle turning speed range 20 - 12.000 U/min spindle motor 7,5 kW feed range max. 10.000 mm/min rapid traverse 48 / 60 / 72 m/min tool change unit 24 Pos. coolant IKZ voltage 400 V c-axis 360 0 b-axis ° total power requirement 25 kW weight of the machine ca. 5,0 t dimensions of the machine ca. 1,90 x 2,70 x 2,85 m chip conveyor 2,00 x 0,60 x 1,65 m coolant tank 1,60 x 1,20 x 0,60 m - Serial No.: RM10090 Axis CNC-Control (5-side machining with single clamping) Hjdpsxq Hgisfx Ad Dsnw – Internal coolant through spindle TSC – electronic hand wheel – Spindel oil chiller – working light – Central lubrication

Condition: good (used), Year of construction: 2001, MACHINE SPECIFICATIONS Control: HEIDENHAIN Machining area: X axis: 500 mm Y axis: 420 mm Z axis: 380 mm Main drive: Hnsdjxq Hb Tjpfx Ad Dow Speed range: 20 – 18,000 rpm Power (40/100% ED): 35/25 kW Torque (40/100% ED): 130/87 Nm Feeds: Working feeds (X/Y/Z): 20-20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work table (B+C axes): Table dimensions: Ø 500 x 380 mm Maximum weight on table: 200 Kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360º (resol. 0.001º) B-axis travel: 180º (resol. 0.001º) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2.470 mm Machine weight: 5.020 Kg Taper: Taper type: SK 40 (DIN 69871 A) Electrical connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Cooling fluid through the chuck Automatic tool changer: ATC-32 - Maximum tool weight / Maximum tool diameter: 6 Kg / 200 mm Chip evacuator Electronic handwheel: HR-410 High capacity cooling system: Interlit SUK-200-900 Equipped with Reninshaw probe interface: probe included