Ecoclean GmbH

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 24050102129, total width: 2,000 mm, total length: 1,400 mm, total height: 3,000 mm, overall weight: 600 kg, water tank capacity: 250 l, working width: 1,200 mm, Front-loading wash system with automatic and manual operation. Temperature range in automatic mode: 0-80°C, in manual mode: 0-45°C. Washing table diameter: 120 cm. System made entirely of AISI 304 stainless steel. Iaodpfx Aiszlqffsksw PLC control with a 10" touchscreen, air gun, steam extraction, filter system, etc. Inspection and test cleaning are possible.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Temperature range adjustable from 0-45°C. Iaodpszlp Ifsfx Aikjw The system features a chip screen and filter. In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Stainless steel AISI304, steam extraction, water level sensor.

Year of construction: 2009, condition: excellent (used), Cleaning system is fully functional. Working dimensions: diameter 800mm, working height 600mm Tank volume: 90L Options: Automatic cleaning or with washing brush Interior lighting Design / Accessories: Direct drive for the washing basket Mist extraction Low water level protection / level control Lid locking Iodezkkb Depfx Aiksaw Weekly timer Chip/particle filter with bath cover plate 5 ECO rinse (fresh water) for minimal water consumption with machine-side hot water preparation Three-dimensional cold air blow-off Oil skimmer Drainage device / bottom flush with pump in gray cast iron and galvanized pipe system Hose connection and tap valve in aluminum/plastic

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: Fabr. / Serien Nr. Co2122, operating hours: 6,250 h, total length: 7,500 mm, total width: 2,500 mm, total height: 4,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, Manufacturer: Laborex Cleaning Technology Mfg. / Serial No. Co2122 Cleaning system with 3 chambers, including pre-cleaning and post-cleaning. Iasdpfx Ajzi E S Usikow The system is completely insulated with stainless steel.

Year of construction: 2010, condition: used, Article: Parts cleaning system Manufacturer: EVT Eiberger Verfahrenstechnik GmbH Isdpozickzjfx Aiksaw Type: LIMPIO - PER Yob: 2010 Solvent: Perchloroethylene Customizable work chamber design as a FRONTTOP loader Regenerable adsorption system Continuous distillation of the solvent Combined vacuum drying Immersion cleaning with recirculation system Rotary-swivel mechanism for the baskets Concentration limit sensor Touchscreen operation Remote diagnostic unit Spray system Second storage tank for solvent Cartridge filter unit with filter drying Feeding system Filling and emptying valves Connection to batch distillation unit Maintenance exhaust system Self-sufficient compressed air supply Plexiglas enclosure Connection to roller feeding system Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2000, Grinding booth, soundproof booth for grinding operations, suitable for noisy environments. Dimensions: depth 4000 mm, length 9000 mm, height 4 meters, with 2 sliding gates. Iasdpfx Ajzh Nrcsiksw

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, workpiece weight (max.): 15 kg, inner dimension height: 95 mm, inner dimension length: 260 mm, negative pressure: 10,000 Pa, No minimum price – guaranteed sale to the highest bidder! Cleaning machine as a single-chamber flood system operating under full vacuum. The machine will undergo a complete overhaul in 2026 with an estimated value of €16,800 and is in very good condition. The original new price of the machine was €104,000. TECHNICAL DETAILS Iedpfxszh Eiqo Aikoaw Cleaning medium: halogen-free hydrocarbon or modified alcohol Cleaning basket dimensions: 260 x 160 x 95 mm Batch weight max.: 15 kg MACHINE DETAILS Overall length: 1,260 mm Overall width: 1,110 mm Overall height: 2,600 mm Total weight: 1,600 kg EQUIPMENT CE marking in roll-on/roll-off standard version Complies with the 31st German Federal Immission Control Ordinance (BImSchV) (as of August 21, 2011) Complies with the Swiss Air Pollution Control Ordinance (as of March 1, 1998) Complies with the Austrian VAV Ordinance (as of July 26, 2022) Complies with the EU VOC Directive 199/13

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Key Features * System is currently still in production use Iedpfxozhui Hs Aiksaw * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Useful length: 1600 mm Useful width: 1040 mm Useful height: 960 mm Iaedpfxozg Ux Ee Aikjw Loading height: 800 mm Maxi load weight: 1500 kg

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. Iodpfszgclmsx Aikoaw The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: not inspected (used), DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system The drum pump, feed hoses, dispensing unit, etc. are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure, max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 Adhesive control unit DÜRR (110017040) 1 Single drum pump (110014004) Weight: approx. 300 kg Iaodszgckcopfx Aiksw Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: refurbished (used), Year of construction: 2010, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 2.519, year of last overhaul: 2026, protection type (IP code): IP65, ejection height: 1,100 mm, nominal power: 4 kW (5.44 HP), operating pressure: 6 bar, operating temperature: 80 °C, working range: 950 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 1 rpm, temperature: 80 °C, total height: 700 mm, compressed air connection: 6 bar, BvL cleaning system, Model Ocean RW 900 S. Iasdpfx Aszf Hm Ssiksw Optional features such as filter technology, etc., are still available.

Year of construction: 2017, condition: reconditioned (used), Hello, we are offering two refurbished IBS washing machines, type MAXI 78 and MAXI 91-2. In addition, the pumps have been resealed on these machines. Inspection and collection in Einbeck. The soiled items to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the machine is switched on, and the washing solution in the tank is heated. In the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the washing tank and pump it through 6 stainless steel nozzle pipes with overlapping flat spray nozzles. The items to be cleaned are blasted from all sides with the hot solution during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the machine switches off automatically. Advantages: Iodpszcuxxefx Aiksaw 2 pumps arranged horizontally 6 three-dimensional nozzle pipes made of stainless steel robust stainless steel design additional small parts cleaning basket made of stainless steel (diameter 170 mm) rotating washing basket made of stainless steel, V-belt drive via separate motor fume extraction stainless steel sieve plate with filter basket above the washing tank low water level protection adjustable feet

Year of construction: 2016, condition: good (used), 1 used hot water parts cleaning system Manufacturer: Bio Circle Type: HTW II 800 Year of manufacture: 2016 Material: Stainless steel Electrically powered rotating basket Effective and cost-efficient Overall width: 1175 mm Overall depth: 1145 mm Height with closed lid: 1380 mm (with exhaust bend) Height with open lid: 1780 mm Inner diameter of the mesh basket: 800 mm Max. usable height: 400 mm Max. payload: 350 kg Tank capacity for cleaning fluid: 150 liters Electrical connection: 6 kW Voltage: 400 volts Frequency: 50 Hz Flow rate of the cleaning pump: 4.8 m³/h Spray pressure: 2.5 bar Electric heating in the washing tank: 5.3 kW Treatment temperature: 10°C to 85°C Load capacity: 150 kg Fresh water connection: 1/2″ Drain valve: 1 1/4″ Iajdszb Iyaopfx Aiksw Weight: 330 kg

Year of construction: 2017, operating hours: 14,932 h, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Max. batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Iodjy U Hkxspfx Aikeaw Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit • High cleaning quality with minimal solvent consumption • Ideal for precision engineering and machining businesses The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 863/2020, total height: 2,100 mm, inner dimension length: 530 mm, inner dimension width: 320 mm, inner dimension height: 200 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, electrical fuse: 50 A, input current: 40 A, temperature: 70 °C, heating capacity: 6 kW (8.16 HP), load capacity: 40 kg, Equipment: documentation/manual, Höckh Multiclean Lean Concept III, including filling with new Safechem Dualene 1601 solvent. Everything is complete and ready for use and is sold as a complete package. The system offers options for immersion spraying, steam degreasing, and ultrasonic cleaning. Remote maintenance is prepared and only requires an internet connection. In addition to the system, the scope of delivery includes: - automatic basket feed Iaedpfxoy Sxn Dj Aikjw - 3 cleaning baskets - chiller for system cooling - complete documentation The system can be inspected and tested before purchase. After the purchase, we will gladly assist with dismantling and loading, and can also provide a brief training session on machine operation and maintenance. The system is fully functional and in very good condition. We are selling this system because we now have a larger system in operation.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: E 118/09025, For sale: OTEC fine polishing machine - Type: ECO 1 X 18 - Machine No.: E 118/09025 - Year: 2009 - Weight: 50KG The machine has been regularly serviced and maintained and is in excellent condition. The polishing machine has seen very little use and is practically like new. It is suitable for fine polishing, cleaning, and deburring of demanding workpieces that have undergone various machining processes. Workpieces are placed in a tank together with media and coolant, where they are rotated and vibrated simultaneously, resulting in effective polishing. The machine operates fully automatically, with adjustable polishing time, vibration frequency, and rotation speed. It is connected to the mains and ready to operate. Iaedpoy Rzxcefx Aikow

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 70/060260, For sale: OTEC fine polishing machine - Model: DF 70 - Serial No.: 70/060260 - Year of manufacture: 2006 Iaodpfx Aioy Rzwxjkow - Power: 2 kW - Weight: 450 kg Machine Accessories: - Coolant tank - Automatic polishing paste dosing system - Report printer - 10 tool holders - 1 mixer holder I am offering a polishing machine designed for the ultra-fine finishing of various metal parts after machining operations. Additionally, it is suitable for cleaning heavily soiled or stubborn residues from parts made of different materials. The machine is fully automatic and equipped with an additional coolant tank, preventing overheating of media and workpieces during operation and enabling continuous polishing for 10 hours or more. The polishing process involves fully or partially immersing the workpieces in the polishing media, allowing the granulate to reach all surfaces evenly. This ensures an even finish, even in deep or hard-to-reach areas. The machine has seen very little use and has been regularly maintained. It is currently connected to the electrical supply and ready for immediate operation.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, WEBEN / CEEVER Washing Tunnel with Robot, Conveyor, and Inspection System Iaedpfxjy Ein Uo Aiksw Manufacturer: WEBEN / CEEVER Application: Automated parts handling downstream of a press (press not included), washing, drying, and quality control Description: This system is an automated solution for retrieving and transferring parts from an upstream press. Robots pick up the parts and move them via a conveyor and transport system through an industrial washing tunnel (wet cleaning), followed by an inspection/measuring system for quality assessment. The complete process chain is designed for continuous operation, integrating robotic handling, washing process, conveyor technology, and automatic quality decision (OK/NOK). Technical Specifications – Washing Tunnel Year of manufacture: 2021 Cleaning process: spray-spray system (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1,400 mm Max. workpiece dimensions: depth 2,000 mm Max. workpiece dimensions: height 10 mm Max. workpiece weight: 12 kg System dimensions: width 3,000 mm System dimensions: depth 35,500 mm System dimensions: height 3,400 mm Weight (empty): 20,000 kg Weight (operational): 27,000 kg Material in contact with media: stainless steel AISI 304 Washing tank volume: 4,000 liters Washing tank heating: electric 80 kW Rinse tank volume: 2,500 liters Rinse tank heating: electric 40 kW Washing pump: 2,000 l/min, 6 bar, 30 kW Rinse pump: 900 l/min, 6 bar, 15 kW Washing filtration: 4 bag filters, 100 µm Drying: electric 48 kW Electrical connection: 380–400 V / 50 Hz / 3 Ph + N Total connected load washing tunnel: 385 kW Compressed air for automation: 6–8 bar, 1/4" connection Compressed air blow-off: 6–8 bar, 4 connections, approx. 30,000 Nm³/h consumption, 1 1/4" connection Technical Specifications – Robot, Conveyor, and Inspection System Control: Siemens PLC S7-1500 1517F Operator panel: Siemens TP1900 Comfort Robot: KUKA KR50 R2500 IONTEC with KRC4 (multiple robots in line) Conveyor technology: multiple conveyor lines / transport zones Max. conveying speed: up to 24 m/min Inspection system: laser measuring system with automatic OK/NOK evaluation and sorting Location: EU

Condition: used, TECHNICAL DETAILS - Capacity : 1900 [l] - Pump flow rate : 430 - MOTOR : 7.5 [kW] - Basket dimensions : 1790 x 800 [mm] - Payload max. : 1000 [kg] Iaodpfjy Dikmox Aiksw - Machine weight : 1500 [kg]

Year of construction: 2005, condition: used, Technical details: Iodjyzhnlopfx Aiksaw lifting capacity in kg: 230 kg

Condition: new, Year of construction: 2026, Immediately available for collection (new machine) Metalclean P60 spray cleaning system in stainless steel Single-tank spray cleaning unit with rotating basket. Usable dimensions = D = 590 mm, H = 380 mm Load capacity per batch = 100 kg Tank volume = 60 liters Spray pressure = 3 bar Iaodpfx Aijyymbhjkew Operating voltage = 3 x 400 V/N/PE 50 Hz

Year of construction: 2011, condition: good (used), functionality: fully functional, Clean-o-mat SP 120 Usable basket diameter approx.: 1140 mm Usable height approx.: 500 mm Loading height approx.: 830 mm Permissible basket load: 500 kg Fluid volume: 210 l Ijdpfx Aieyth Uzjkeaw Pump delivery rate: 280 l/min Connection data: 230/400 V / 24 A / 50 Hz Pump motor power: 4 kW Heating capacity: 9 kW Rotary basket drive: 0.09 kW 1-stage steam extraction: 0.45 kW Overall height approx.: 1250 mm

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VF353, The "CeBeCo®" TROWAMAT® XL is suitable for cleaning wash items whose contaminants can be removed by spraying with detergent under pressure. The inserted basket, filled with wash items, is evenly passed by the nozzles positioned above and below, via a carousel wheel. Additionally, the wash items are sprayed by a nozzle system in the door and at the rear of the unit. Thanks to the high spray pressure and low rotation speed, a consistent cleaning result is achieved. Isdsyr Dkcepfx Aikoaw TECHNICAL DATA Type: "CeBeCo®" TROWAMAT "XL" Size 40100/40 WST Drawing No. 3314-20 Tank: Approx. 3 mm thick stainless steel sheet 1.4301 Insulation: 25 mm mineral wool / Terodem Cladding: 1 mm galvanized steel sheet Usable dimensions: approx. 400 mm x 1,000 mm x 400 mm (height) Load capacity: max. 100 kg, with evenly distributed load Overall dimensions: approx. 2,700 mm x 1,825 mm x 2,530 mm (height) without roller conveyor Entry height: approx. 1240 mm Detergent: service water, aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Detergent tank volume: approx. 460 L Rinse agent: aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Rinse agent tank volume: approx. 240 L The offer includes roller conveyor and washing baskets. For further information, please contact us.

Condition: ready for operation (used), functionality: fully functional, total length: 1,100 mm, total width: 1,300 mm, total height: 1,600 mm, input voltage: 380 V, load capacity: 500 kg, empty load weight: 550 kg, Equipment: documentation/manual, Chamber washing system with rotary rack. Max. workpiece weight 500 kg, basket size 74x74 cm, max. workpiece height 66 cm. Includes loading trolley and cleaning powder. Operating manual available. Ijdpfx Aeymggvoikoaw